CV61-12A659-AB 1768677 ECU Box Lower Housing for 2013 Ford Kuga
Primary OE reference: CV61-12A659-AB
Cross-reference 1: CV61-12A659-AB
Cross-reference 2: 1768677
Product type: ECU Box Lower Housing
Applicable vehicle: 2013 FORD Kuga
Installation position: Engine-compartment ECU mounting area
Brand: FORD
Model: Kuga
Vehicle year: 2013
Identification detail: lower carrier with formed walls, mounting feet and harness clearances
Fitment basis: Confirm CV61-12A659-AB / 1768677, connector or latch layout, mounting points and enclosure profile.
Installation guidance: Dry-fit the component, engage every locating tab and confirm cables or seals are not trapped.
Purchase reference: Quote SKU FD02040-002, OE number, vehicle application and required quantity.
CV61-12A659-AB ECU Box Lower Housing Overview
For the 2013 FORD Kuga, CV61-12A659-AB corresponds to this ecu box lower housing. This base supports the electronic module and routes surrounding wiring; mounting-foot geometry is more important than the outer outline alone.
Component Identification
Before replacement, compare lower carrier with formed walls, mounting feet and harness clearances. A correct match should sit naturally at the engine-compartment ecu mounting area without forcing nearby harnesses, trim or brackets.
Enclosure and Retention Details
Clean the mating rim and identify every clip before fitting CV61-12A659-AB. Replace damaged retainers; uneven engagement can leave the enclosure open to moisture or vibration.
Workshop Stock Control
For workshop stock control, label FD02040-002 with CV61-12A659-AB / 1768677, FORD Kuga and the exact installation area. Keep the component separated from visually similar electrical housings.
Mounting and Harness Routing
Set the lower carrier on its original supports before loading the electrical assembly. Check cable exits, bracket holes and drainage orientation before final fastening.
Automotive Replacement Part Specifications
| Product type | ECU Box Lower Housing |
|---|---|
| Primary OE reference | CV61-12A659-AB |
| Internal item code | FD02040-002 |
| Vehicle brand | FORD |
| Model | Kuga |
| Vehicle year | 2013 |
| Applicable vehicle | 2013 FORD Kuga |
| Installation position | Engine-compartment ECU mounting area |
| Identification detail | lower carrier with formed walls, mounting feet and harness clearances |
| Cross-reference numbers | CV61-12A659-AB / 1768677 |
Packaging and Wholesale Supply
Protect the connector, clips, sealing rim and moulded corners during packing. Mark the carton with FD02040-002, CV61-12A659-AB and Engine-compartment ECU mounting area so warehouse staff can distinguish the correct variant.
Frequently Asked Questions
What does CV61-12A659-AB identify?
CV61-12A659-AB identifies the listed ecu box lower housing for the 2013 FORD Kuga.
How should FD02040-002 be matched?
Compare the OE reference, lower carrier with formed walls, mounting feet and harness clearances, installation location and all concealed attachment details.
Is visual similarity enough for selection?
No. Similar electrical covers and sensors can use different connectors, clips, seals or mounting geometry.
What should be checked after fitting?
Confirm full tab engagement, even edge seating and clearance around the wiring harness.
What details are needed for a trade quotation?
Provide CV61-12A659-AB / 1768677, SKU FD02040-002, vehicle model, model year, destination and quantity.
