71101-TP5-H60 Front Bumper Cover for 2013 HONDA Spirior High-Spec
Product: Front Bumper Cover
Primary OE: 71101-TP5-H60
Item code: HD02001-042
Cross-reference numbers:
71101-TP5-H60
Brand: HONDA
Model: Spirior
Application reference: 2013 HONDA Spirior High-Spec
Position: Front
Verification: Inspect sensor, washer, lamp, reflector, grille and tow-eye provisions against the vehicle specification.
Supply note: Quote HD02001-042, order quantity, destination, packing method and sample requirements.
71101-TP5-H60 serves as a structured sourcing record for workshops, resellers and fleet repair operations. For 2013 HONDA Spirior High-Spec, Yongshang Auto tracks the requested front bumper cover as HD02001-042.
HD02001-042 requires an application-specific review: The application record narrows the search, while final acceptance still depends on the exact vehicle configuration and original panel. A dated photo record makes the decision easier to review if questions arise later.
Repair-Shop Approval Sequence
Fitment guidance for 71101-TP5-H60. Verify whether the request is for the upper cover, lower cover or complete outer cover. The purchase description should match the physical section needed by the repair. A dated photo record makes the decision easier to review if questions arise later.
The front location on 2013 HONDA Spirior High-Spec should be reviewed as follows: Review the mounting system as a complete assembly. Correct selection depends on the relationship between the cover, retainers, reinforcement, absorber and surrounding trim. The purchase team can use the recorded result when confirming the order line.
Product Technical Specifications
| Product type | Front Bumper Cover |
|---|---|
| Primary OE reference | 71101-TP5-H60 |
| Internal item code | HD02001-042 |
| Vehicle brand | HONDA |
| Vehicle model | Spirior |
| Application reference | 2013 HONDA Spirior High-Spec |
| Installation position | Front |
| Cross-reference numbers | 71101-TP5-H60 |
| Fitment approval | OE number, VIN, production date, body contour, mounting tabs and equipment openings |
Repair-Market Use of the Cover
Functional context for 71101-TP5-H60. This service part is commonly used in collision repair, refurbishment and wholesale replacement programmes. Its suitability still depends on the specific vehicle and equipment configuration. The same information helps receiving staff identify the correct carton and panel.
Application note for item HD02001-042. Replacement is intended to return the outer bumper area to its designed form. Structural crash components must be inspected independently and replaced when required. The purchase team can use the recorded result when confirming the order line.
Panel Inspection Prior to Paint
Receiving note for carton HD02001-042. Separate cosmetic surface preparation from fitment approval. Fit, aperture layout and mounting geometry should be accepted first. This review is especially useful near model-year or equipment transitions.
Pre-finish check for 2013 HONDA Spirior High-Spec. Review edge thickness and moulding channels where accessories will be transferred. The workshop should confirm those interfaces before committing labour to the finish. That comparison gives the workshop a clearer basis for a pre-paint decision.
From Sample Confirmation to Bulk Order
A quotation for 71101-TP5-H60 should reflect this guidance: State the acceptable inspection method for surface condition, tabs, openings and general contour. Commercial approval should distinguish cosmetic review from vehicle fitment confirmation. That comparison gives the workshop a clearer basis for a pre-paint decision.
The 2 square images attached to HD02001-042 support visual review. Add consignee restrictions, carton-size limits and pallet rules to the initial request. Late packaging changes can affect both cost and achievable container utilisation. The purchase team can use the recorded result when confirming the order line.
Frequently Asked Questions
Which records should accompany an enquiry for OE 71101-TP5-H60?
2013 HONDA Spirior High-Spec is the stated reference for this page. Compare the new panel in an unpainted trial fit using serviceable vehicle-side brackets. Stop if gaps or mounting points require force. This sequence keeps catalogue selection separate from cosmetic preparation.
What links the panel, carton and quotation to HD02001-042?
Supplier-code context for this front bumper cover. Ask for pre-shipment photographs when the purchase programme requires packaging approval. The record should show item labels, carton condition and loading arrangement. Keep HD02001-042 beside 71101-TP5-H60 in the final commercial record.
How should the workshop compare corners and equipment openings?
Panel-comparison guidance for 2013 HONDA Spirior High-Spec. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. The completed check supports a traceable discussion between buyer and supplier.
How should the repairer handle a gap problem before painting?
Finishing guidance for OE 71101-TP5-H60. Photograph the received condition, relax the panel on suitable supports and trial fit it before changing the supplied surface. Those observations should remain available during sample and bulk-order review.
How should mixed-order requirements be stated for HD02001-042?
Wholesale request for HD02001-042. Provide the OE code, supplier item number, delivery market and carton requirements. Add original-part photographs when regional fitment may vary. Those observations should remain available during sample and bulk-order review.
Request a Quote for 71101-TP5-H60
Add consignee restrictions, carton-size limits and pallet rules to the initial request. Late packaging changes can affect both cost and achievable container utilisation. For Yongshang Auto’s review, connect 71101-TP5-H60 and HD02001-042 with the intended 2013 HONDA Spirior High-Spec, requested quantity and delivery market.
