8U0 807 061Q GRU Front Bumper Lower Valance for AUDI Q3 2016
Product: Front Bumper Lower Valance
Primary OE: 8U0 807 061Q GRU
Item code: AD02002-007
Cross-reference numbers:
8U0 807 061Q GRU
8U0807061QGRU
Brand: AUDI
Model: Q3
Application reference: 2016 AUDI Q3
Position: Front
Verification: Verify the full application record and complete a non-destructive trial fit before sanding, drilling or painting.
Supply note: Quote AD02002-007, order quantity, destination, packing method and sample requirements.
8U0 807 061Q GRU is prepared for buyers who need a clear bumper-lip reference before paint and assembly work. For 2016 AUDI Q3, Yongshang Auto tracks the requested front bumper lower valance as AD02002-007.
AD02002-007 requires an application-specific review: The visible profile, mounting edges and equipment apertures must be compared with the removed lower-bumper part before refinishing begins. This review is especially useful near model-year or equipment transitions.
Panel Geometry Confirmation
Fitment guidance for 8U0 807 061Q GRU. Ask the workshop to identify every transferable component from the removed lower-bumper part. Grilles, lamps, mouldings, sensors and fasteners are normally reviewed separately from the outer panel. The completed check supports a traceable discussion between buyer and supplier.
The front location on 2016 AUDI Q3 should be reviewed as follows: The safest release method is VIN review, OE confirmation and trial alignment in that order. Painting should only follow after the workshop accepts the dry fit. The buyer can then connect the physical review to the supplier item record.
Product Technical Specifications
| Product type | Front Bumper Lower Valance |
|---|---|
| Primary OE reference | 8U0 807 061Q GRU |
| Cross-reference numbers | 8U0 807 061Q GRU |
| Internal item code | AD02002-007 |
| Vehicle brand | AUDI |
| Vehicle model | Q3 |
| Model year | 2016 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2016 AUDI Q3 |
Role in Exterior Repair
Functional context for 8U0 807 061Q GRU. The component is a finish-critical exterior item, so packing, storage and workshop handling can influence the result as much as catalogue selection. The repairer should document the outcome before transferring trim components.
Application note for item AD02002-007. This service part is commonly used in collision repair, refurbishment and wholesale replacement programmes. Its suitability still depends on the specific vehicle and equipment configuration. A dated photo record makes the decision easier to review if questions arise later.
Body-Shop Preparation Notes
Receiving note for carton AD02002-007. Keep the panel wrapped until a clean inspection area is available. Dust, metal filings and nearby body-shop work can mark the visible surface before painting starts. The same information helps receiving staff identify the correct carton and panel.
Pre-finish check for 2016 AUDI Q3. Confirm the quantity of loose covers and associated packing labels at receipt. Keep each item code linked to its carton until the fitment sample has been approved. This evidence belongs in the same approval file as the vehicle photographs.
B2B Sourcing and Shipment Preparation
A quotation for 8U0 807 061Q GRU should reflect this guidance: Provide the expected packaging method, label language and pallet requirements. Buyers should also identify any inspection standard that must appear on the order file. The repairer should document the outcome before transferring trim components.
The 1 square image attached to AD02002-007 support visual review. Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. This evidence belongs in the same approval file as the vehicle photographs.
Frequently Asked Questions
How is fitment assessed for OE 8U0 807 061Q GRU?
2016 AUDI Q3 is the stated reference for this page. Photograph the surrounding grille, lamps and adjacent body panels as well as the removed lower-bumper part. These interfaces help distinguish similar designs. Those observations should remain available during sample and bulk-order review.
Where should buyers record item number AD02002-007?
Supplier-code context for this front bumper lower valance. Provide the purchasing contact, technical contact and delivery location. Separating commercial and fitment questions can speed up approval of the order. Keep AD02002-007 beside 8U0 807 061Q GRU in the final commercial record.
Which physical areas require comparison on this front cover?
Panel-comparison guidance for 2016 AUDI Q3. Check the OE reference first and use physical evidence second. Do not approve from an online image or exterior colour alone. This evidence belongs in the same approval file as the vehicle photographs.
At what stage should refinishing begin for 2016 AUDI Q3?
Finishing guidance for OE 8U0 807 061Q GRU. Photograph the received condition, relax the panel on suitable supports and trial fit it before changing the supplied surface. This evidence belongs in the same approval file as the vehicle photographs.
Which facts allow packaging and freight planning to begin?
Wholesale request for AD02002-007. Provide the OE code, supplier item number, delivery market and carton requirements. Add original-part photographs when regional fitment may vary. This sequence keeps catalogue selection separate from cosmetic preparation.
Request a Quote for 8U0 807 061Q GRU
For repeat supply, reference the previously accepted sample or purchase order. Do not rely only on a shortened product description when multiple variants exist. For Yongshang Auto’s review, connect 8U0 807 061Q GRU and AD02002-007 with the intended 2016 AUDI Q3, requested quantity and delivery market.
