8R0955102 Front Right Headlight Washer Nozzle for AUDI Q5 2010

8R0955102 Front Right Headlight Washer Nozzle Product Overview

The component shown under 8R0955102 is a front right headlight washer nozzle intended for AUDI Q5 2010. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for Q5

Compatibility for 8R0955102 should be confirmed against AUDI Q5 2010 and the right installation side. The review should verify that the OE reference is not for the opposite side, verify the required left or right installation side, and compare every tab, clip seat and locating shoulder. Use the removed part and product photographs to retain the removed component for a direct physical comparison, compare the complete OE marking with the removed washer component, and verify nearby parking-sensor or trim interfaces; finally, match the mounting pattern around the bumper aperture and check the washer jet position relative to the headlamp lens.

Headlight Washer Nozzle Function and Design Notes

The visible and hidden interfaces of AD02010-099 should be checked separately. For this headlight washer nozzle, review the hose spigot angle on the washer nozzle, check the cap hinge or retaining point, and inspect the telescopic body for smooth movement. A direct comparison with the removed part should additionally compare the outer surface profile with the bumper opening, review the clip geometry on the rear face, and check the nozzle outlet orientation. Before the item is accepted, inspect the base bracket around every locating slot and compare the cap-to-support engagement method.

OE Identification and Side Confirmation

8R0955102 is the primary OE identity for this right front right headlight washer nozzle, while AD02010-099 is the internal item code. Match both references to the vehicle record, then review facelift and pre-facelift washer layouts. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for AD02010-099 begins before the bumper area is disturbed: photograph the original routing before disassembly and reconfirm the OE number before discarding the packaging. During trial fitting, trial-fit the component before final fastening, test the spray direction before returning the vehicle, and verify that the cap remains attached through a full washer cycle. Before returning the vehicle to service, inspect nearby wiring and sensors before refitting trim, use hand pressure rather than levering narrow plastic tabs, and inspect the bumper opening after the trial fit.

Receiving Inspection

When AD02010-099 arrives, receiving staff should inspect mounting holes for flash, blockage or edge damage, confirm the internal item code before mixed stock is shelved, and verify the cover contour against the approved product photograph. Before workshop release, check the cap hinge or retaining point for free movement, compare the supplied side with the vehicle repair order, check painted or primed surfaces under neutral lighting, and inspect projecting pins before placing the item on a hard bench. Complete the inspection by ensuring that staff confirm the nozzle outlet is clean and unobstructed, photograph the received item if the vehicle fitment is still pending, and document any shortage before the receiving inspection is closed.

Product Technical Specifications

Wholesale Supply and Protective Packing

For a quotation or repeat order of 8R0955102, please identify the required installation side, state the target vehicle application, and confirm pallet requirements for larger quantities. Packing instructions should confirm the acceptable delivery window, request protective inner wrapping for painted faces, and identify project stock and service stock separately. Before dispatch, separate fragile actuator bodies from heavier metal parts and protect each nozzle outlet from dust during transit.

Frequently Asked Questions

Is 8R0955102 a complete headlight washer system?

No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For item AD02010-099, the approval should protect each nozzle outlet from dust during transit. The same item record should also state the requested delivery schedule.

Are clips, hoses or fasteners supplied with 8R0955102?

The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. On the listed AUDI Q5 2010, technicians should plug open fluid connections during packing. A workshop comparison should additionally retain the product label until fitment is confirmed.

Is workshop installation recommended for 8R0955102?

Yes. A qualified workshop can access the bumper area on the Q5, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the right-side order line, clean the hose and connector before assembly. The order review should further verify that the cover closes without rubbing the bumper.

What should be inspected when 8R0955102 arrives?

Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. The product-specific check for 8R0955102 should check the spring-return area where the component includes an actuator. Receiving staff should also check the cap hinge or retaining point for free movement.

Is a sample order available for 8R0955102?

Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. Before this headlight washer nozzle is accepted, verify the packed quantity by OE reference. Before approval, the buyer or technician should protect each nozzle outlet from dust during transit.