8P0955275A Front Left Headlight Washer Nozzle Cover for AUDI A3 2010-2013
Primary OE reference: 8P0955275A
Cross-reference number 1: 8P0 955 275 A
Cross-reference number 2: 8P0955275A
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A3 2010-2013
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A3
Model year: 2010-2013
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-017
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8P0955275A Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 8P0955275A is a front left headlight washer nozzle cover intended for AUDI A3 2010-2013. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A3
Compatibility for 8P0955275A should be confirmed against AUDI A3 2010-2013 and the left installation side. The review should match the connector and fluid inlet position where applicable, verify the required left or right installation side, and review painted, primed and unpainted finish requirements. Use the removed part and product photographs to separate mirrored left and right items during inventory selection, confirm whether a cap, nozzle, bracket or complete assembly is required, and compare product photographs with the removed part from several angles; finally, match the mounting pattern around the bumper aperture and confirm that the listed model designation matches the vehicle.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-017 should be checked separately. For this headlight washer nozzle cover, review the spring-loaded return features where fitted, compare the retracted position with the bumper surface, and inspect the rear reinforcement ribs. A direct comparison with the removed part should additionally check the cap hinge or retaining point, review the engagement of the cover with the nozzle stem, and compare the cap-to-support engagement method. Before the item is accepted, inspect the hose connector for ovality and check whether the visible part requires painting.
OE Identification and Side Confirmation
8P0955275A is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-017 is the internal item code. Match both references to the vehicle record, then check regional variations in headlamp-cleaning equipment. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-017 begins before the bumper area is disturbed: work with the washer system depressurized and protect the painted bumper surface during removal. During trial fitting, disconnect the fluid hose without twisting the plastic spigot, transfer reusable clips only after checking their condition, and trial-fit the component before final fastening. Before returning the vehicle to service, align the cover flush with the bumper surface, route the washer hose away from sharp edges, and confirm that the nozzle extends and retracts freely.
Receiving Inspection
When AD02010-017 arrives, receiving staff should verify that protective plugs remain in open fluid connections, document any shortage before the receiving inspection is closed, and review the hose spigot for impact damage or distortion. Before workshop release, compare connector depth and hose angle with the retained original part, check the actuator body for straightness before trial installation, inspect the fluid passage only with clean, non-damaging tools, and verify the cover contour against the approved product photograph. Complete the inspection by ensuring that staff confirm the bumper-facing edge has not been compressed in transit, inspect projecting pins before placing the item on a hard bench, and protect the visible face again after inspection is complete.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8P0955275A |
| Cross-reference numbers | 8P0 955 275 A 8P0955275A |
| Internal item code | AD02010-017 |
| Vehicle brand | AUDI |
| Vehicle model | A3 |
| Model year | 2010-2013 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A3 2010-2013 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8P0955275A, please confirm sample requirements before a bulk order, identify project stock and service stock separately, and provide the consignee and freight-forwarder details. Packing instructions should use dividers to prevent caps from rubbing each other, request replacement-part documentation when required, and provide the complete destination address or port. Before dispatch, request protective inner wrapping for painted faces and list model years and bumper versions for mixed orders.
Frequently Asked Questions
Is workshop installation recommended for 8P0955275A?
Yes. A qualified workshop can access the bumper area on the A3, transfer hoses or clips safely and test the washer system for correct operation and leaks. For item AD02010-017, the approval should protect the painted bumper surface during removal. The same item record should also confirm that the nozzle extends and retracts freely.
Which vehicle application is listed for 8P0955275A?
8P0955275A is listed for AUDI A3 2010-2013. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. On the listed AUDI A3 2010-2013, technicians should separate mirrored left and right items during inventory selection. A workshop comparison should additionally check regional variations in headlamp-cleaning equipment.
Can 8P0955275A fit every A3 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For the left-side order line, confirm the destination-market equipment specification. The order review should further check the washer jet position relative to the headlamp lens.
Why must left and right versions of 8P0955275A be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. The product-specific check for 8P0955275A should inspect narrow plastic tips before installation. Receiving staff should also inspect the telescopic body for smooth movement.
Does the finish specification matter for 8P0955275A?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle cover is accepted, check the fluid inlet for storage contamination. Before approval, the buyer or technician should check the bumper-facing surface for transport marks.
