87940-0R050 Left Exterior Side Mirror Assembly for TOYOTA RAV4 2012
Primary OE reference: 87940-0R050
Cross-reference 1: 87940-0R050
Product type: Exterior Side Mirror Assembly
Applicable vehicle: TOYOTA RAV4 2012
Installation position: Left exterior mirror position
Brand: TOYOTA
Model: RAV4
Vehicle year: 2012
Listed mirror features: 9-wire application reference
Mirror function: Re-establishes the outside viewing surface and housing during a side-mirror replacement project so workshop planning starts with the correct part.
Mounting comparison: Identify the triangular mounting base against the removed mirror so electrical functions remain compatible.
Electrical review: Inspect the harness exit direction before the old mirror is disconnected so unsupported functions are not claimed.
Fitment confirmation: Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Supplied component scope: Only the identified product line is supplied unless additional mirror caps or hardware are agreed separately.
Receiving priority: Handle the housing shell before electrical testing begins to protect the visible exterior surface.
Handling note: Protect the triangular mounting base before paint preparation so left and right mirrors remain separated.
Wholesale enquiry: Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Order preparation: Specify the required mirror side with the export quotation request before electrical variants are quoted.
Internal item code: TY02014-009
87940-0R050 Exterior Side Mirror Assembly Product Overview
87940-0R050 identifies an exterior side mirror assembly for the left exterior mirror position on TOYOTA RAV4 2012. Completes the outside viewing surface and housing with the left or right position clearly separated before trim and wiring are reassembled. The page records TY02014-009 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Recovers the model-shaped mirror footprint after collision, housing or glass damage while preserving the listed fitment identity. Restores the outside viewing surface and housing during a side-mirror replacement project before trim and wiring are reassembled. Recovers the roadside awareness point beside the front door during a side-mirror replacement project so the mirror can be compared against the removed unit. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Photograph the cover contour and lower edge during incoming-part comparison to prevent an incorrect housing selection. Identify the production-date application against the removed mirror to distinguish manual and powered applications. Match the cover contour and lower edge before reusable trim is transferred to separate facelift variations. Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Electrical and Housing Checks
Confirm the adjustment control type without assuming every trim shares one harness to keep function expectations documented. Test the manual control cable with each purchase line kept separate so unsupported functions are not claimed. Check the folding mechanism while the original unit is still available to prevent a connector mismatch. The listed feature reference is 9-wire application reference; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87940-0R050 |
| Cross-reference numbers | 87940-0R050 |
| Internal item code | TY02014-009 |
| Vehicle brand | TOYOTA |
| Vehicle model | RAV4 |
| Model year | 2012 |
| Installation position | Left exterior mirror position |
| Listed mirror features | 9-wire application reference |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Handle the mounting studs against the approved reference so connector damage is isolated early. Document the housing shell after unpacking but before installation to protect the visible exterior surface. Examine the connector terminals during sample approval before any finishing work starts. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Separate the preferred shipping method together with consignee details before a commercial invoice is prepared. Identify the requested packaging mark together with consignee details so left-right quantities remain correct. Specify the preferred shipping method when left and right units are combined so similar mirror housings remain separated. Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation.
Frequently Asked Questions
Should 87940-0R050 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87940-0R050 fitment be confirmed?
Confirm TOYOTA RAV4 2012 and the left side before checking the base outline and connector. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 87940-0R050 arrives?
Review the mirror glass with transit packaging retained to prevent scratches during handling. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87940-0R050?
Record the complete OE number on every purchase line to avoid mixing similar exterior mirrors. Connector and rear-mount photographs help separate close variants.
What is supplied with 87940-0R050?
Painted appearance in a photograph does not replace verification of the required housing and electrical content. Use the product photographs and written quotation to confirm the final sales scope.
