87620-3X660 Right Exterior Side Mirror Assembly for HYUNDAI Elantra 2014
Primary OE reference: 87620-3X660
Cross-reference 1: 87620-3X660
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Elantra 2014
Installation position: Right exterior mirror position
Brand: HYUNDAI
Model: Elantra
Vehicle year: 2014
Listed mirror features: integrated signal lamp
Mirror function: Restores the driver-side rearward viewing point after collision, housing or glass damage so the mirror can be compared against the removed unit.
Mounting comparison: Record the signal-lamp opening at the exact door position to separate facelift variations.
Electrical review: Verify the manual control cable while the original unit is still available before a powered mirror is operated.
Fitment confirmation: Use the VIN when a model-year change may alter the base, harness or lamp arrangement.
Supplied component scope: The quotation should state whether a complete mirror, mirror cover or auxiliary unit is required.
Receiving priority: Document the folding pivot with transit packaging retained so connector damage is isolated early.
Handling note: Isolate the connector terminals at warehouse receiving so connector damage is isolated early.
Wholesale enquiry: Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Order preparation: Specify the destination country on repeat distributor orders so left-right quantities remain correct.
Internal item code: HY02014-066
87620-3X660 Exterior Side Mirror Assembly Product Overview
87620-3X660 identifies an exterior side mirror assembly for the right exterior mirror position on HYUNDAI Elantra 2014. Supports the intended viewing angle beside the cabin for repair stock tied to the listed OE reference before paint or finishing work is scheduled. The page records HY02014-066 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Re-establishes the vehicle’s original rearward observation area for an exterior-body repair quotation to reduce incorrect left-right ordering. Re-establishes the intended viewing angle beside the cabin for an exterior-body repair quotation while maintaining the intended exterior appearance. Returns the factory-style exterior observation point during a side-mirror replacement project before paint or finishing work is scheduled. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Inspect the triangular mounting base using clear rear and connector photographs so electrical functions remain compatible. Confirm the cover contour and lower edge with the existing harness accessible to separate facelift variations. Cross-check the complete OE label against the removed mirror so the base seats without distortion. Check whether the required item is a full assembly, auxiliary mirror or cover before finalising the order.
Electrical and Housing Checks
Separate the plug keying and latch with each purchase line kept separate so the supplied scope matches the enquiry. Test the turn-signal wiring before energising a replacement assembly so manual and electrical variants stay separated. Identify the mirror-heating circuit without assuming every trim shares one harness before a powered mirror is operated. The listed feature reference is integrated signal lamp; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87620-3X660 |
| Cross-reference numbers | 87620-3X660 |
| Internal item code | HY02014-066 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Elantra |
| Model year | 2014 |
| Installation position | Right exterior mirror position |
| Listed mirror features | integrated signal lamp |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Review the triangular mounting base after unpacking but before installation to protect the visible exterior surface. Review the edge seals and clips before electrical testing begins so every received unit can be accounted for. Handle the signal lens after unpacking but before installation so every received unit can be accounted for. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
List the preferred shipping method before sample approval to make repeat ordering more reliable. Include the destination country for every purchase line so left-right quantities remain correct. Separate the requested packaging mark before sample approval so similar mirror housings remain separated. Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Frequently Asked Questions
What should be checked when 87620-3X660 arrives?
Check the triangular mounting base at warehouse receiving so every received unit can be accounted for. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 87620-3X660?
Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation. Connector and rear-mount photographs help separate close variants.
What is supplied with 87620-3X660?
Ask for written confirmation if the application requires a signal lamp, heating, power fold or a specific pin count. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 87620-3X660 listed for?
The recorded application is HYUNDAI Elantra 2014. Production date, trim equipment and connector details still require physical verification.
Can 87620-3X660 fit every Elantra model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
