87606-22701-CA Left Exterior Side Mirror Assembly for HYUNDAI Accent 1998
Primary OE reference: 87606-22701-CA
Cross-reference 1: 87606-22701-CA
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HYUNDAI Accent 1998
Installation position: Left exterior mirror position
Brand: HYUNDAI
Model: Accent
Vehicle year: 1998
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Renews the outside viewing surface and housing for an exterior-body repair quotation while maintaining the intended exterior appearance.
Mounting comparison: Photograph the cover contour and lower edge against the removed mirror to separate facelift variations.
Electrical review: Document the manual control cable while the original unit is still available to avoid damaging vehicle-side terminals.
Fitment confirmation: Do not rely on housing colour alone; mounting geometry and the complete OE identity are more reliable.
Supplied component scope: Reusable caps, screws and internal door pieces are not automatically included with the listed mirror component.
Receiving priority: Review the housing shell before paint preparation to identify transit damage.
Handling note: Handle the purchase-line label at warehouse receiving so cracked glass is found immediately.
Wholesale enquiry: State sample, carton-marking and delivery requirements together with the required quantity.
Order preparation: Reference the requested packaging mark for every purchase line before electrical variants are quoted.
Internal item code: HY02014-023
87606-22701-CA Exterior Side Mirror Assembly Product Overview
87606-22701-CA identifies an exterior side mirror assembly for the left exterior mirror position on HYUNDAI Accent 1998. Restores the side-specific mirror assembly location without treating a similar housing as universal to reduce incorrect left-right ordering. The page records HY02014-023 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Renews the vehicle’s original rearward observation area at the recorded door or auxiliary mounting point to support safe rearward observation. Completes the roadside awareness point beside the front door after collision, housing or glass damage to match the vehicle-specific housing outline. Renews the factory-style exterior observation point for the stated production year and model to support safe rearward observation. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Record the connector shape and pin count using clear rear and connector photographs to confirm the supplied mirror side. Align the folding joint and base angle using clear rear and connector photographs to prevent an incorrect housing selection. Record the complete OE label using clear rear and connector photographs before the door trim is disturbed. Compare mounting studs, housing profile and plug shape before approving HY02014-023 for installation.
Electrical and Housing Checks
Document the vehicle-side mirror connector before the inner door panel is refitted so lamp and adjustment requirements are clear. Trace the plug keying and latch before optional functions are promised so lamp and adjustment requirements are clear. Review the lamp lens and terminals with each purchase line kept separate so lamp and adjustment requirements are clear. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 87606-22701-CA |
| Cross-reference numbers | 87606-22701-CA |
| Internal item code | HY02014-023 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Accent |
| Model year | 1998 |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Isolate the signal lens with transit packaging retained so connector damage is isolated early. Examine the connector terminals before paint preparation so every received unit can be accounted for. Examine the carton-supported corners after unpacking but before installation to identify transit damage. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Submit the vehicle model and year when left and right units are combined to support an accurate B2B quotation. Reference the preferred shipping method on the wholesale enquiry so similar mirror housings remain separated. Reference the sample or bulk-order requirement before sample approval so left-right quantities remain correct. Confirm the destination country and preferred transport method before export pricing is prepared.
Frequently Asked Questions
Is 87606-22701-CA a left or right side mirror?
87606-22701-CA is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 87606-22701-CA include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. Painted appearance in a photograph does not replace verification of the required housing and electrical content.
Should 87606-22701-CA be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
How should 87606-22701-CA fitment be confirmed?
Compare mounting studs, housing profile and plug shape before approving HY02014-023 for installation. The complete OE reference and left exterior mirror position should agree before installation.
What should be checked when 87606-22701-CA arrives?
Examine the housing shell after unpacking but before installation to protect the visible exterior surface. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
