86842-1M000 Rear Right Mudguard for KIA Cerato TD 2009-2016
Primary OE reference: 86842-1M000
Cross-reference 1: 86842-1M000
Product type: Rear Right Mudguard
Applicable vehicle: KIA Cerato TD 2009-2016
Installation position: Rear Right wheel-arch splash protection position
Brand: KIA
Model: Cerato
Vehicle year: 2009-2016
Protective role: reduces water, mud and loose-stone discharge behind the rear wheel while shielding adjacent lower body surfaces
Fitment confirmation: Confirm the requested surface and supply scope with the sales team for 86842-1M000; The exact wheel location matters because opposite guards are normally not interchangeable.
Physical comparison: Use the removed component to verify the guard’s installed orientation; because the offered part must match both position and physical construction.
Supply scope: Supply is for the documented mud flap at the stated wheel position, with consolidated packing available for approved quantities.
Receiving focus: Photograph the received part if the outer contour differs from the sample for KA02017-012; The removed part should remain available for a direct bench comparison.
Purchase preparation: Ask for a pre-shipment packing check on consolidated orders; Complete application data allows the quotation to stay tied to the correct part.
86842-1M000 Rear Right Mudguard Product Overview
The replacement item is matched to the listed vehicle KIA Cerato TD 2009-2016. It reduces water, mud and loose-stone discharge behind the rear wheel while shielding adjacent lower body surfaces. Check handedness carefully before removing protective packaging from the supplied part.
Arch-Edge Fit and Guard Stability
Inspect the wheel-side texture, outer face and attachment pattern on 86842-1M000 for the rear right wheel-arch splash protection position, to avoid transferring loads into a misaligned clip or screw boss.
Vehicle and OE Fitment Confirmation
Check the vehicle-side fastener pattern before the order is packed for KIA Cerato TD 2009-2016 and the source application "09-16款 赛拉图/福瑞迪 TD 挡泥板 后右". The original sample reveals hidden geometry that front-view photos cannot show.
Product Technical Specifications
| Product type | Rear Right Mudguard |
|---|---|
| Primary OE reference | 86842-1M000 |
| Internal item code | KA02017-012 |
| Vehicle brand | KIA |
| Model | Cerato |
| Vehicle year | 2009-2016 |
| Installation position | Rear Right wheel-arch splash protection position |
| Applicable vehicle | KIA Cerato TD 2009-2016 |
| Cross-reference numbers | 86842-1M000 |
Bench Comparison and Final Position Check
Check every mounting tab before transferring reusable hardware when 86842-1M000 arrives under item code KA02017-012. Fastener condition affects retention even when the moulded panel is correct.
Wholesale Ordering Information
Provide the VIN when production-year fitment remains uncertain when requesting 86842-1M000 for KIA Cerato TD 2009-2016. Production-market information is useful when body trim differs by region.
Frequently Asked Questions
How can I confirm 86842-1M000 matches my vehicle?
Confirm the OE number, axle, side, production year and mounting layout against the removed part before ordering.
Which physical details should be compared on 86842-1M000?
Match the moulded return, wheel-facing surface and body-side tabs. so original hardware can be evaluated before it is reused.
What is included with the 86842-1M000 mudguard supply?
One replacement splash guard is supplied for the stated axle and side, with accessory hardware subject to order confirmation.
What should be checked when 86842-1M000 is delivered?
Separate left and right guards before mixed orders reach installation. The mounting flange deserves the same inspection as the visible outer edge.
What information is needed to quote 86842-1M000?
List destination, packing preference and target delivery date for KA02017-012. Stated delivery expectations help purchasing and production schedules align.
