86569-B4000 Front Bumper Grille for HYUNDAI i10 2014
Product: Front Bumper Grille for 2014 HYUNDAI i10
Primary OE: 86569-B4000 as the primary lookup number
Item code: HY02004-042 for quotation and order tracking
Vehicle brand: HYUNDAI
Vehicle model: i10 (2014)
Application: 2014 HYUNDAI i10 (black-finish version); verify by VIN and original part
Position: Front bumper area
Cross-reference numbers:
86569-B4000
Verification: Use the original part number and vehicle production data as evidence
Supply note: Request sample, lot quantity, destination and packing terms in the enquiry
Item-specific review: 86569-B4000 on i10 uses HY02004-042 as the controlled front-bumper line; compare i10 frame contour, 86569-B4000 mesh geometry and HY02004-042 attachment direction
Approval record: HY02004-042 should link the 2014 HYUNDAI i10 (black-finish version) vehicle evidence to 86569-B4000; retain i10 opening photos and front grille measurements with the buyer decision
86569-B4000 Front Bumper Grille Product Overview
This page documents 86569-B4000, a front bumper grille associated with 2014 HYUNDAI i10 (black-finish version). Rather than treating grille parts as universal, the listing keeps internal reference HY02004-042 and the stated application visible for technical review.
Inspection, Packaging and Receiving Control
For HY02004-042, quality control begins with identity: confirm 86569-B4000 and the stated front bumper grille. Next review deformation, edge damage, mounting features and colour or texture consistency under neutral light.
For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.
i10 Bumper Grille Function and Position
The front grille area is sensitive to trim and market changes. For this i10 item, frame dimensions, mesh layout and mounting tabs must agree with the original component. The source version is black-finish version.
The saved source description is 14款 I10 前杠格栅(全黑款). It should be compared with VIN data and the removed grille before the application is approved.
Workshop Handling and Installation Review
During installation on the i10, remove damaged fragments from the front bumper and inspect the receiving slots. Trial-fit HY02004-042 without forcing tabs, then secure fasteners in a balanced sequence.
Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.
OE-Led Fitment Verification for 86569-B4000
Fitment confidence requires three agreeing sources: 86569-B4000, 2014 HYUNDAI i10 (black-finish version) and the physical front grille. Do not approve HY02004-042 from a similar mesh pattern alone.
Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.
Product-Specific Approval Record for 86569-B4000
The following review points belong to HY02004-042 and the stated 2014 HYUNDAI i10 (black-finish version) application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.
- Sample decision 1 — i10 / 86569-B4000: confirm transferred covers or badges fit without altering the frame for i10 item HY02004-042 under OE reference 86569-B4000.
- Order trace 2 — HY02004-042 / Front: keep the production-date evidence beside the approved OE lookup for i10 item HY02004-042 under OE reference 86569-B4000.
- Vehicle evidence 3 — 2014 HYUNDAI i10 (black-finish version) / HY02004-042: photograph every locator before the damaged grille leaves the workshop for i10 item HY02004-042 under OE reference 86569-B4000.
- Catalogue proof 4 — 86569-B4000 / HY02004-042: inspect side returns for the same depth and fastening direction for i10 item HY02004-042 under OE reference 86569-B4000.
- Packing control 5 — i10 / 86569-B4000: compare clip spacing without bending the replacement grille for i10 item HY02004-042 under OE reference 86569-B4000.
- Identity gate 6 — HY02004-042 / Front: retain a signed control sample for repeat purchasing decisions for i10 item HY02004-042 under OE reference 86569-B4000.
- Workshop checkpoint 7 — 2014 HYUNDAI i10 (black-finish version) / HY02004-042: compare adjacent moulding gaps before locking the centre clips for i10 item HY02004-042 under OE reference 86569-B4000.
- Receiving record 8 — 86569-B4000 / HY02004-042: inspect mounting slots for collision distortion before trial fitting for i10 item HY02004-042 under OE reference 86569-B4000.
- Fitment file 9 — i10 / 86569-B4000: verify the photographed part and physical sample share one revision for i10 item HY02004-042 under OE reference 86569-B4000.
- Geometry control 10 — HY02004-042 / Front: record the mesh orientation alongside the vehicle production label for i10 item HY02004-042 under OE reference 86569-B4000.
- Sample decision 11 — 2014 HYUNDAI i10 (black-finish version) / HY02004-042: mark lamp or trim interfaces on the buyer approval photograph for i10 item HY02004-042 under OE reference 86569-B4000.
- Order trace 12 — 86569-B4000 / HY02004-042: note surface texture under neutral lighting before installation for i10 item HY02004-042 under OE reference 86569-B4000.
- Vehicle evidence 13 — i10 / 86569-B4000: link receiving photographs to the commercial order-line number for i10 item HY02004-042 under OE reference 86569-B4000.
- Catalogue proof 14 — HY02004-042 / Front: record any market-specific openings shown on the original bumper for i10 item HY02004-042 under OE reference 86569-B4000.
- Packing control 15 — 2014 HYUNDAI i10 (black-finish version) / HY02004-042: match the grille outline to the stated body style and facelift for i10 item HY02004-042 under OE reference 86569-B4000.
Application Evidence Narrative for HY02004-042
The subject is a front bumper grille catalogued as 86569-B4000 for 2014 HYUNDAI i10 (black-finish version). Supplier code HY02004-042 supports traceable enquiries, sample approval and repeat-order documentation.
The front bumper grille occupies the front exterior fascia of the i10. It should align with the bumper cover, neighbouring trim and air-entry zone without being confused with the crash beam behind it. This listing concerns the black-finish version.
2014 HYUNDAI i10 (black-finish version) buyers can begin identification with 86569-B4000. This front bumper grille is registered under HY02004-042 and described with the application limits needed by parts specialists and body shops.
The front bumper grille forms part of the i10 bumper assembly rather than a universal mesh insert. Its service role is to restore the correct opening, surrounding body line and attachment interface. Variant information: black-finish version.
86569-B4000 identifies this front bumper grille for 2014 HYUNDAI i10 (black-finish version). The record links OE-led search intent with supplier code HY02004-042, a precise vehicle reference and the photographs saved with the source item.
Mounted in the front bumper area, a front bumper grille completes a defined opening and supports the intended visual and airflow path of the i10. Its perimeter, mesh pattern and fastening points are vehicle-specific. The source identifies the black-finish version.
The identity chain for HY02004-042 is HYUNDAI i10, 2014, front bumper position and OE 86569-B4000. Keep HY02004-042 beside i10 vehicle evidence, keep 86569-B4000 beside the removed grille marking, and keep the front location beside the approval photographs.
86569-B4000 Front Bumper Grille for HYUNDAI i10 2014 is the controlled search entity for this page. In a buyer file, 86569-B4000 should lead the i10 comparison, HY02004-042 should lead the supplier trace, and 2014 HYUNDAI i10 (black-finish version) should lead the vehicle-side confirmation before shipment.
Product Technical Specifications
| Product type | Front Bumper Grille |
|---|---|
| Primary OE reference | 86569-B4000 |
| Cross-reference numbers | 86569-B4000 |
| Internal item code | HY02004-042 |
| Vehicle brand | HYUNDAI |
| Vehicle model | i10 |
| Model year | 2014 |
| Installation position | Front bumper area |
| Applicable vehicle | 2014 HYUNDAI i10 (black-finish version) |
Wholesale Procurement for HY02004-042
For wholesale review, send 86569-B4000, HY02004-042 and the complete 2014 HYUNDAI i10 (black-finish version) description with original-part photos. Buyers may also define neutral packaging, barcode or pre-shipment documentation needs.
The listing avoids universal-fit language because bumper grilles can change with market and facelift. Evidence-based confirmation protects both the repair and the supply programme.
Frequently Asked Questions
Why is the bumper position important for 86569-B4000?
Front, rear, upper, lower and side grille pieces are not interchangeable. This record describes the front bumper location.
Are brackets, emblems and fasteners included with 86569-B4000?
Supply scope follows the pictured HY02004-042 component. Confirm loose hardware, badges, covers and accessories with the quotation before ordering.
How should 86569-B4000 be checked after delivery?
Verify identity first, then inspect the front bumper grille frame, mesh, tabs, finish and packing-related distortion before installation.
Where is the 86569-B4000 grille installed on the i10?
The listing places it in the front bumper area of the i10. It is not presented as a complete bumper cover or crash reinforcement.
Can this front bumper grille fit every i10?
No universal-fit claim is made. Facelift, body style, region and trim can change the grille. This item is described as the black-finish version.
Request a Product and Fitment Review
Send the complete OE reference 86569-B4000, item code HY02004-042, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.
