81481-48020 Front Right Fog Light Bezel for TOYOTA Highlander 2009

81481-48020 Front Right Fog Light Bezel Product Overview

The product shown under 81481-48020 is a front right fog light bezel intended for TOYOTA Highlander 2009. Check the right orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Highlander

When separating nearby Highlander variants, compare the full OE marking, inspect the lamp aperture size, and confirm the vehicle market. Before packing the confirmed item, compare the installation direction, match the locating-slot layout, and check adjacent bumper parts.

When comparing 81481-48020 with the removed bezel, compare every fixing tab, review facelift styling, and compare the original grille section. For a no-force trial fit, check adjacent bumper parts, confirm the vehicle market, and confirm the model year.

For the listed 2009 application, compare the original grille section, inspect the removed bezel, and confirm the vehicle market. While checking adjacent body parts, check the vehicle build date, verify the mounting side, and compare the installation direction.

Front Right Fog Light Bezel Design and Replacement Notes

Before sourcing this front right fog light bezel, review fastening slots, check the bumper transition, and compare the surface texture. During receiving inspection, inspect reinforcement ribs, review narrow bezel ends, and check the adjoining gap.

Before confirming this fog light bezel, compare transferred hardware, compare vent or grille openings, and compare the surface texture. Before the quotation is confirmed, compare mounting-hole height, compare the centre alignment, and measure the original length.

For TOYOTA Highlander 2009, inspect the frame width, check the lamp interface, and compare transferred hardware. Before packing the confirmed item, inspect reinforcement ribs, review fastening slots, and check the bezel curvature.

Application-Specific Identification Notes

Before workshop installation with 81481-48020 on the Highlander 2009: check the vehicle build date. The TY02008-012 sample for the right side should compare the original edge profile. For TOYOTA identification, 81481-48020 also requires technicians to verify the lamp remains centred. A buyer quoting TY02008-012 should state the destination port for the TOYOTA Highlander 2009 order.

For application-specific sourcing with 81481-48020 on the Highlander 2009: compare the full OE marking. The TY02008-012 sample for the right side should inspect the moulded face. For TOYOTA identification, 81481-48020 also requires technicians to clean the bumper mounting area. A buyer quoting TY02008-012 should send photographs of the removed part for the TOYOTA Highlander 2009 order.

Before workshop installation with 81481-48020 on the Highlander 2009: review market-version differences. The TY02008-012 sample for the right side should check the lamp interface. For TOYOTA identification, 81481-48020 also requires technicians to trial-fit the bezel without force. A buyer quoting TY02008-012 should request protective inner wrapping for the TOYOTA Highlander 2009 order.

For application-specific sourcing with 81481-48020 on the Highlander 2009: compare the full OE marking. The TY02008-012 sample for the right side should review locator direction. For TOYOTA identification, 81481-48020 also requires technicians to confirm every locator engages. A buyer quoting TY02008-012 should confirm sample requirements for the TOYOTA Highlander 2009 order.

Installation Guidance

When separating nearby Highlander variants, check the final perimeter, support the bumper cover evenly, and confirm every locator engages. While reviewing the supplied photographs, review separate hardware needs, clean the bumper mounting area, and check adjacent panel gaps.

When comparing 81481-48020 with the removed bezel, clean the bumper mounting area, confirm an evenly seated fit, and inspect each screw point. Before final installation, check adjacent panel gaps, protect nearby painted surfaces, and inspect the surrounding guides.

For the listed 2009 application, transfer reusable clips carefully, check adjacent panel gaps, and confirm every locator engages. During receiving inspection, avoid bending moulded tabs, retain the removed bezel for comparison, and check lamp-to-bezel clearance.

Product Technical Specifications

Wholesale Supply and Packing

Before sourcing this front right fog light bezel, confirm the required finish, request export quotation terms, and inspect receiving condition. At the workshop preparation stage, request protective inner wrapping, review carton edge protection, and include the complete OE reference.

Before confirming this fog light bezel, confirm sample requirements, retain the product label, and inspect receiving condition. For a repeat wholesale order, support the bezel during transit, protect projecting locator tabs, and request supported carton packing.

For TOYOTA Highlander 2009, state annual purchasing volume, provide the delivery country, and inspect receiving condition. While reviewing the supplied photographs, check the ordered mounting side, state the required quantity, and support the bezel during transit.

Frequently Asked Questions

Can photographs alone confirm 81481-48020 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Highlander, check the nearby lamp opening, check the adjoining gap, avoid bending moulded tabs, and support the bezel during transit before installation or quotation.

Does trim specification matter for 81481-48020?

Yes. Different equipment grades can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For Highlander, review market-version differences, compare vent or grille openings, inspect the surrounding guides, and request export quotation terms before installation or quotation.

How should 81481-48020 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For Highlander, inspect the lamp aperture size, inspect reinforcement ribs, check adjacent panel gaps, and request supported carton packing before installation or quotation.

What should be inspected when 81481-48020 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For Highlander, check adjacent bumper parts, review the outer-edge shape, confirm an evenly seated fit, and check the ordered mounting side before installation or quotation.

Where is 81481-48020 installed?

The listed front right fog light bezel belongs in the right front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For Highlander, check the vehicle build date, check the bumper transition, inspect damaged mounting points, and include the complete OE reference before installation or quotation.

Request a Quote

Send the complete OE reference 81481-48020, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.