7P6807938 Front Right Headlight Washer Nozzle Cover for VOLKSWAGEN Touareg 2011
Primary OE reference: 7P6807938
Cross-reference number 1: 7P6 807 938
Cross-reference number 2: 7P6807938
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: VOLKSWAGEN Touareg 2011
Installation position: Front bumper / headlight washer area
Side: Right
Brand: VOLKSWAGEN
Model: Touareg
Model year: 2011
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: VM02010-016
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
7P6807938 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 7P6807938 is a front right headlight washer nozzle cover intended for VOLKSWAGEN Touareg 2011. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Touareg
Compatibility for 7P6807938 should be confirmed against VOLKSWAGEN Touareg 2011 and the right installation side. The review should review facelift and pre-facelift washer layouts, match the mounting pattern around the bumper aperture, and retain the removed component for a direct physical comparison. Use the removed part and product photographs to verify that the OE reference is not for the opposite side, check regional variations in headlamp-cleaning equipment, and match the connector and fluid inlet position where applicable; finally, check whether the original cover is supplied separately from its support and confirm the front bumper option before ordering.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of VM02010-016 should be checked separately. For this headlight washer nozzle cover, compare the cap-to-support engagement method, inspect the rear reinforcement ribs, and check each molded locator against the original component. A direct comparison with the removed part should additionally review any paint-preparation requirement before fitting, compare the outer surface profile with the bumper opening, and inspect narrow plastic tips before installation. Before the item is accepted, check the bumper-facing surface for transport marks and review the bracket stiffness and screw seats.
OE Identification and Side Confirmation
7P6807938 is the primary OE identity for this right front right headlight washer nozzle cover, while VM02010-016 is the internal item code. Match both references to the vehicle record, then check regional variations in headlamp-cleaning equipment. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for VM02010-016 begins before the bumper area is disturbed: check that the washer unit is fully seated in its guide and complete a final visual check under even lighting. During trial fitting, test the spray direction before returning the vehicle, paint or finish visible covers before final installation when required, and retain the original fasteners unless replacements are specified. Before returning the vehicle to service, check the system for leaks after reconnection, inspect nearby wiring and sensors before refitting trim, and confirm that no hose is pinched behind the bumper.
Receiving Inspection
When VM02010-016 arrives, receiving staff should check the spring-return area where the component includes an actuator, verify the nozzle head returns smoothly without applying excess force, and check the cap hinge or retaining point for free movement. Before workshop release, inspect the rear locator shape without forcing any movable section, inspect the fluid passage only with clean, non-damaging tools, verify that protective plugs remain in open fluid connections, and confirm that loose accessories are identified on the packing list. Complete the inspection by ensuring that staff compare the supplied side with the vehicle repair order, compare the visible surface texture with the ordered specification, and record carton damage before the item is moved to workshop stock.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 7P6807938 |
| Cross-reference numbers | 7P6 807 938 7P6807938 |
| Internal item code | VM02010-016 |
| Vehicle brand | VOLKSWAGEN |
| Vehicle model | Touareg |
| Model year | 2011 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | VOLKSWAGEN Touareg 2011 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 7P6807938, please confirm the acceptable delivery window, confirm whether caps and nozzles should be supplied as pairs, and confirm the acceptable delivery window. Packing instructions should confirm whether caps and nozzles should be supplied as pairs, confirm the acceptable delivery window, and confirm whether caps and nozzles should be supplied as pairs. Before dispatch, confirm the acceptable delivery window and confirm whether caps and nozzles should be supplied as pairs.
Frequently Asked Questions
Should the washer system be tested after fitting 7P6807938?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For item VM02010-016, the approval should align the cover flush with the bumper surface. The same item record should also retain the original fasteners unless replacements are specified.
Is a sample order available for 7P6807938?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. On the listed VOLKSWAGEN Touareg 2011, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally identify project stock and service stock separately.
Which side uses 7P6807938?
This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For the right-side order line, check the fluid inlet for storage contamination. The order review should further compare the visible bumper-side contour.
Can 7P6807938 fit every Touareg model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. The product-specific check for 7P6807938 should verify the required left or right installation side. Receiving staff should also compare the actuator orientation behind the bumper cover.
Is 7P6807938 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. Before this headlight washer nozzle cover is accepted, confirm the acceptable delivery window. Before approval, the buyer or technician should confirm whether the visible cover needs a primed or finished surface.
