76880-TA1-M01 Front Right Headlight Washer Nozzle for HONDA Accord 2008
Primary OE reference: 76880-TA1-M01
Cross-reference number 1: 76880-TA1-M01
Cross-reference number 2: 76880TA1M01
Product type: Front Right Headlight Washer Nozzle
Vehicle application: HONDA Accord 2008
Installation position: Front bumper / headlight washer area
Side: Right
Brand: HONDA
Model: Accord
Model year: 2008
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: HD02010-004
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76880-TA1-M01 Front Right Headlight Washer Nozzle Product Overview
The component shown under 76880-TA1-M01 is a front right headlight washer nozzle intended for HONDA Accord 2008. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Accord
Compatibility for 76880-TA1-M01 should be confirmed against HONDA Accord 2008 and the right installation side. The review should confirm the front bumper option before ordering, review facelift and pre-facelift washer layouts, and verify that the OE reference is not for the opposite side. Use the removed part and product photographs to check whether the original cover is supplied separately from its support, match the exact model year and bumper revision, and retain the removed component for a direct physical comparison; finally, match the connector and fluid inlet position where applicable and separate mirrored left and right items during inventory selection.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of HD02010-004 should be checked separately. For this headlight washer nozzle, inspect the telescopic body for smooth movement, compare the distance between mounting points, and review any paint-preparation requirement before fitting. A direct comparison with the removed part should additionally check the fluid inlet for storage contamination, inspect the actuator barrel for impact damage, and compare the outer surface profile with the bumper opening. Before the item is accepted, review the left-to-right mirrored geometry and check the complete supplied scope against the photographs.
OE Identification and Side Confirmation
76880-TA1-M01 is the primary OE identity for this right front right headlight washer nozzle, while HD02010-004 is the internal item code. Match both references to the vehicle record, then separate mirrored left and right items during inventory selection. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-004 begins before the bumper area is disturbed: replace distorted clips or damaged seals and retain the original fasteners unless replacements are specified. During trial fitting, follow the vehicle workshop procedure for bumper removal, protect the painted bumper surface during removal, and paint or finish visible covers before final installation when required. Before returning the vehicle to service, align the cover flush with the bumper surface, use hand pressure rather than levering narrow plastic tabs, and test the spray direction before returning the vehicle.
Receiving Inspection
When HD02010-004 arrives, receiving staff should compare the supplied side with the vehicle repair order, confirm the nozzle outlet is clean and unobstructed, and inspect the rear locator shape without forcing any movable section. Before workshop release, compare connector depth and hose angle with the retained original part, separate mirrored components immediately after carton opening, confirm that small seals or clips have not remained in the wrapping, and check the carton partition for evidence of part-to-part contact. Complete the inspection by ensuring that staff protect the visible face again after inspection is complete, review the hose spigot for impact damage or distortion, and confirm that loose accessories are identified on the packing list.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 76880-TA1-M01 |
| Cross-reference numbers | 76880-TA1-M01 76880TA1M01 |
| Internal item code | HD02010-004 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2008 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | HONDA Accord 2008 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76880-TA1-M01, please confirm pallet requirements for larger quantities, state the requested delivery schedule, and separate fragile actuator bodies from heavier metal parts. Packing instructions should use dividers to prevent caps from rubbing each other, request a packing-list breakdown by internal item code, and confirm sample approval before mass shipment. Before dispatch, state any outer-carton marking requirements and verify the packed quantity by OE reference.
Frequently Asked Questions
Can product photographs alone confirm 76880-TA1-M01 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For item HD02010-004, the approval should compare the actuator orientation behind the bumper cover. The same item record should also confirm that the vehicle is equipped with a factory headlight washer system.
Which vehicle application is listed for 76880-TA1-M01?
76880-TA1-M01 is listed for HONDA Accord 2008. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. On the listed HONDA Accord 2008, technicians should compare the washer opening beside the correct headlamp. A workshop comparison should additionally compare the complete OE marking with the removed washer component.
Are clips, hoses or fasteners supplied with 76880-TA1-M01?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For the right-side order line, provide the complete destination address or port. The order review should further use dividers to prevent caps from rubbing each other.
How should 76880-TA1-M01 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. The product-specific check for 76880-TA1-M01 should separate mirrored left and right items during inventory selection. Receiving staff should also compare the actuator orientation behind the bumper cover.
Does the finish specification matter for 76880-TA1-M01?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle is accepted, compare the depth of the actuator body. Before approval, the buyer or technician should check the joint between the visible cap and hidden support.
