76880-SLE-S01 Front Right Headlight Washer Nozzle for HONDA Odyssey 2009
Primary OE reference: 76880-SLE-S01
Cross-reference number 1: 76880-SLE-S01
Cross-reference number 2: 76880SLES01
Product type: Front Right Headlight Washer Nozzle
Vehicle application: HONDA Odyssey 2009
Installation position: Front bumper / headlight washer area
Side: Right
Brand: HONDA
Model: Odyssey
Model year: 2009
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: HD02010-026
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76880-SLE-S01 Front Right Headlight Washer Nozzle Product Overview
The component shown under 76880-SLE-S01 is a front right headlight washer nozzle intended for HONDA Odyssey 2009. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Odyssey
Compatibility for 76880-SLE-S01 should be confirmed against HONDA Odyssey 2009 and the right installation side. The review should compare the complete OE marking with the removed washer component, compare the actuator orientation behind the bumper cover, and confirm the front bumper option before ordering. Use the removed part and product photographs to compare the hose connection or cover hinge with the original part, compare every tab, clip seat and locating shoulder, and review facelift and pre-facelift washer layouts; finally, compare the nozzle travel direction with the vehicle-side installation and confirm that the vehicle is equipped with a factory headlight washer system.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of HD02010-026 should be checked separately. For this headlight washer nozzle, review any paint-preparation requirement before fitting, compare the distance between mounting points, and inspect the telescopic body for smooth movement. A direct comparison with the removed part should additionally check each molded locator against the original component, review the spring-loaded return features where fitted, and compare the retracted position with the bumper surface. Before the item is accepted, inspect the rear reinforcement ribs and check the cap hinge or retaining point.
OE Identification and Side Confirmation
76880-SLE-S01 is the primary OE identity for this right front right headlight washer nozzle, while HD02010-026 is the internal item code. Match both references to the vehicle record, then confirm the destination-market equipment specification. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-026 begins before the bumper area is disturbed: confirm that no hose is pinched behind the bumper and retain the original fasteners unless replacements are specified. During trial fitting, complete a final visual check under even lighting, reconfirm the OE number before discarding the packaging, and work with the washer system depressurized. Before returning the vehicle to service, protect the painted bumper surface during removal, disconnect the fluid hose without twisting the plastic spigot, and transfer reusable clips only after checking their condition.
Receiving Inspection
When HD02010-026 arrives, receiving staff should photograph the received item if the vehicle fitment is still pending, review the production finish against the approved sample, and match the item label to the purchase order and OE reference. Before workshop release, confirm that loose accessories are identified on the packing list, separate mirrored components immediately after carton opening, confirm the internal item code before mixed stock is shelved, and check molded tabs for whitening, cracks or transport stress. Complete the inspection by ensuring that staff check painted or primed surfaces under neutral lighting, verify that protective plugs remain in open fluid connections, and document any shortage before the receiving inspection is closed.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 76880-SLE-S01 |
| Cross-reference numbers | 76880-SLE-S01 76880SLES01 |
| Internal item code | HD02010-026 |
| Vehicle brand | HONDA |
| Vehicle model | Odyssey |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | HONDA Odyssey 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76880-SLE-S01, please request protective inner wrapping for painted faces, list model years and bumper versions for mixed orders, and request barcode or private-label details when needed. Packing instructions should request moisture protection for sea freight, request a packing-list breakdown by internal item code, and confirm the acceptable delivery window. Before dispatch, send photographs of the removed washer part and separate left and right items on the packing list.
Frequently Asked Questions
Why must left and right versions of 76880-SLE-S01 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For item HD02010-026, the approval should compare the support flange width. The same item record should also check each molded locator against the original component.
Can 76880-SLE-S01 fit every Odyssey model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. On the listed HONDA Odyssey 2009, technicians should verify the required left or right installation side. A workshop comparison should additionally verify the required left or right installation side.
Does the finish specification matter for 76880-SLE-S01?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. For the right-side order line, check the cap hinge or retaining point. The order review should further check whether the visible part requires painting.
Should the washer system be tested after fitting 76880-SLE-S01?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. The product-specific check for 76880-SLE-S01 should paint or finish visible covers before final installation when required. Receiving staff should also work with the washer system depressurized.
What information should accompany a 76880-SLE-S01 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. Before this headlight washer nozzle is accepted, request moisture protection for sea freight. Before approval, the buyer or technician should confirm the acceptable delivery window.
