76250-SAA-A01 Left Exterior Side Mirror Assembly for HONDA Fit 2004
Primary OE reference: 76250-SAA-A01
Cross-reference 1: 76250-SAA-A01
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA Fit 2004
Installation position: Left exterior mirror position
Brand: HONDA
Model: Fit
Vehicle year: 2004
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Supports the mirror base and visible rearward field with the left or right position clearly separated so workshop planning starts with the correct part.
Mounting comparison: Inspect the door-side bolt pattern before the order is approved so electrical functions remain compatible.
Electrical review: Compare the turn-signal wiring without assuming every trim shares one harness before final fitment approval.
Fitment confirmation: Keep the original mirror available until the OE label, door-side footprint and controls have been matched.
Supplied component scope: Only the identified product line is supplied unless additional mirror caps or hardware are agreed separately.
Receiving priority: Review the mounting studs before the packaging is discarded so every received unit can be accounted for.
Handling note: Support the carton-supported corners after unpacking but before installation to protect the visible exterior surface.
Wholesale enquiry: List left and right quantities separately when a mixed-side distributor order is requested.
Order preparation: Record the adjustment and lamp requirements before production scheduling to keep the OE identity traceable.
Internal item code: HD02014-014
76250-SAA-A01 Exterior Side Mirror Assembly Product Overview
76250-SAA-A01 identifies an exterior side mirror assembly for the left exterior mirror position on HONDA Fit 2004. Recovers the outside viewing surface and housing for an exterior-body repair quotation while maintaining the intended exterior appearance. The page records HD02014-014 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Replaces the model-shaped mirror footprint inside the vehicle’s original attachment layout to match the vehicle-specific housing outline. Recovers the model-shaped mirror footprint inside the vehicle’s original attachment layout while preserving the listed fitment identity. Re-establishes the model-shaped mirror footprint for repair stock tied to the listed OE reference while keeping the OE purchase reference traceable. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Compare the door-side bolt pattern with the existing harness accessible so the original fasteners align correctly. Measure the complete OE label during incoming-part comparison so electrical functions remain compatible. Identify the production-date application at the exact door position to separate facelift variations. Do not rely on housing colour alone; mounting geometry and the complete OE identity are more reliable.
Electrical and Housing Checks
Compare the reusable electrical hardware while the original unit is still available to keep function expectations documented. Identify the manual control cable before optional functions are promised to prevent a connector mismatch. Verify the requested functional scope at parts-receiving inspection before final fitment approval. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76250-SAA-A01 |
| Cross-reference numbers | 76250-SAA-A01 |
| Internal item code | HD02014-014 |
| Vehicle brand | HONDA |
| Vehicle model | Fit |
| Model year | 2004 |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Support the mirror glass on a clean padded surface before any finishing work starts. Examine the housing shell before the component enters workshop stock to identify transit damage. Confirm the housing shell after unpacking but before installation so connector damage is isolated early. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Identify the required mirror side together with consignee details to support an accurate B2B quotation. Reference the connector-side photograph before freight options are compared so lead time can be reviewed correctly. Submit the requested quantity when left and right units are combined so the supplied component scope is clear. Include HD02014-014 on repeat orders so the requested application remains traceable.
Frequently Asked Questions
Can 76250-SAA-A01 fit every Fit model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 76250-SAA-A01 be handled during installation?
Examine the mirror adjustment plate at warehouse receiving to protect the visible exterior surface. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 76250-SAA-A01 a left or right side mirror?
76250-SAA-A01 is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 76250-SAA-A01 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. Reusable caps, screws and internal door pieces are not automatically included with the listed mirror component.
Should 76250-SAA-A01 be painted before trial fitting?
Trial-fit and confirm the base, studs, connector and cover outline first. Complete any finishing work only after fitment approval.
