76208-TLY-H01 Right Exterior Side Mirror Assembly for HONDA CR-V 2017
Primary OE reference: 76208-TLY-H01
Cross-reference 1: 76208-TLY-H01
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA CR-V 2017
Installation position: Right exterior mirror position
Brand: HONDA
Model: CR-V
Vehicle year: 2017
Listed mirror features: 5-wire application reference
Mirror function: Replaces the passenger-side exterior sightline at the recorded door or auxiliary mounting point while preserving the listed fitment identity.
Mounting comparison: Photograph the cover contour and lower edge against the removed mirror to separate facelift variations.
Electrical review: Protect the requested functional scope before optional functions are promised so lamp and adjustment requirements are clear.
Fitment confirmation: Use 76208-TLY-H01 as the purchasing reference, then compare the right exterior mirror position with the removed component.
Supplied component scope: Review every saved photograph to confirm the visible glass, housing, base and connector scope before purchase approval.
Receiving priority: Support the signal lens on a clean padded surface before the repair schedule is affected.
Handling note: Examine the signal lens before the component enters workshop stock to prevent scratches during handling.
Wholesale enquiry: State sample, carton-marking and delivery requirements together with the required quantity.
Order preparation: Attach the adjustment and lamp requirements together with consignee details before a commercial invoice is prepared.
Internal item code: HD02014-032
76208-TLY-H01 Exterior Side Mirror Assembly Product Overview
76208-TLY-H01 identifies an exterior side mirror assembly for the right exterior mirror position on HONDA CR-V 2017. Recovers the driver-side rearward viewing point inside the vehicle’s original attachment layout before trim and wiring are reassembled. The page records HD02014-032 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Reconstructs the mirror base and visible rearward field for the stated production year and model to reduce incorrect left-right ordering. Returns the intended viewing angle beside the cabin inside the vehicle’s original attachment layout so the correct side remains easy to verify. Completes the driver-side rearward viewing point with the left or right position clearly separated so the mirror can be compared against the removed unit. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Review the wiring lead and plug position using the VIN when year boundaries overlap before paint and assembly labour are committed. Measure the connector shape and pin count before the order is approved so the plug does not require modification. Record the manual cable or electrical controls using the VIN when year boundaries overlap so electrical functions remain compatible. Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Electrical and Housing Checks
Separate the reusable electrical hardware before the old mirror is disconnected so the supplied scope matches the enquiry. Identify the available pin positions before the old mirror is disconnected to avoid damaging vehicle-side terminals. Protect the adjustment control type at parts-receiving inspection so the supplied scope matches the enquiry. The listed feature reference is 5-wire application reference; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76208-TLY-H01 |
| Cross-reference numbers | 76208-TLY-H01 |
| Internal item code | HD02014-032 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2017 |
| Installation position | Right exterior mirror position |
| Listed mirror features | 5-wire application reference |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Document the mounting studs during sample approval to identify transit damage. Isolate the mirror adjustment plate before paint preparation so left and right mirrors remain separated. Inspect the mounting studs against the approved reference before a distorted base is fitted. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Attach the required mirror side when mixed-model stock is required so similar mirror housings remain separated. Identify the connector-side photograph on the wholesale enquiry before shipping cost is calculated. Specify the requested packaging mark before sample approval to support an accurate B2B quotation. Attach a connector photo if powered functions or lamp equipment must match the vehicle harness.
Frequently Asked Questions
How should 76208-TLY-H01 fitment be confirmed?
Confirm HONDA CR-V 2017 and the right side before checking the base outline and connector. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 76208-TLY-H01 arrives?
Support the connector terminals during sample approval to prevent scratches during handling. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 76208-TLY-H01?
Attach a connector photo if powered functions or lamp equipment must match the vehicle harness. Connector and rear-mount photographs help separate close variants.
What is supplied with 76208-TLY-H01?
The images define the supplied housing, glass and visible hardware, while vehicle-side wiring remains on the vehicle. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 76208-TLY-H01 listed for?
The recorded application is HONDA CR-V 2017. Production date, trim equipment and connector details still require physical verification.
