76200-TJA-H01 Right Exterior Side Mirror Assembly for HONDA Greiz 2016
Primary OE reference: 76200-TJA-H01
Cross-reference 1: 76200-TJA-H01
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA Greiz 2016
Installation position: Right exterior mirror position
Brand: HONDA
Model: Greiz
Vehicle year: 2016
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Reconstructs the exterior mirror mounting envelope after collision, housing or glass damage to reduce incorrect left-right ordering.
Mounting comparison: Photograph the cover contour and lower edge against the removed mirror to avoid a trim-level mismatch.
Electrical review: Review the harness exit direction at parts-receiving inspection to prevent a connector mismatch.
Fitment confirmation: Verify production year, trim equipment and left-right orientation because similar housings can use different wiring.
Supplied component scope: Painted appearance in a photograph does not replace verification of the required housing and electrical content.
Receiving priority: Support the carton-supported corners before the packaging is discarded so cracked glass is found immediately.
Handling note: Support the mounting studs without placing weight on the glass to keep the correct SKU traceable.
Wholesale enquiry: Record the complete OE number on every purchase line to avoid mixing similar exterior mirrors.
Order preparation: Identify the requested packaging mark on repeat distributor orders before shipping cost is calculated.
Internal item code: HD02014-026
76200-TJA-H01 Exterior Side Mirror Assembly Product Overview
76200-TJA-H01 identifies an exterior side mirror assembly for the right exterior mirror position on HONDA Greiz 2016. Re-establishes the roadside awareness point beside the front door after the removed part has been identified to support safe rearward observation. The page records HD02014-026 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Maintains the side-specific mirror assembly location for repair stock tied to the listed OE reference while keeping the OE purchase reference traceable. Completes the driver-side rearward viewing point during a side-mirror replacement project so the correct side remains easy to verify. Preserves the outside viewing surface and housing without treating a similar housing as universal without mixing visually similar door mirrors. The recorded side is Right, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Review the production-date application at the exact door position before the door trim is disturbed. Compare the cover contour and lower edge before body-color work begins to avoid a trim-level mismatch. Photograph the signal-lamp opening against a retained original sample before the part enters installation work. Do not rely on housing colour alone; mounting geometry and the complete OE identity are more reliable.
Electrical and Housing Checks
Check the adjustment control type before the old mirror is disconnected so the supplied scope matches the enquiry. Separate the mirror-heating circuit while the original unit is still available to prevent a connector mismatch. Confirm the mirror-heating circuit before the inner door panel is refitted so the supplied scope matches the enquiry. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76200-TJA-H01 |
| Cross-reference numbers | 76200-TJA-H01 |
| Internal item code | HD02014-026 |
| Vehicle brand | HONDA |
| Vehicle model | Greiz |
| Model year | 2016 |
| Installation position | Right exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Inspect the triangular mounting base during sample approval so cracked glass is found immediately. Support the carton-supported corners at warehouse receiving so connector damage is isolated early. Review the mirror adjustment plate at warehouse receiving before a distorted base is fitted. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
List the sample or bulk-order requirement before production scheduling to support accurate packing. Identify the requested quantity before production scheduling so lead time can be reviewed correctly. Attach the adjustment and lamp requirements on the wholesale enquiry to support accurate packing. State sample, carton-marking and delivery requirements together with the required quantity.
Frequently Asked Questions
How should 76200-TJA-H01 fitment be confirmed?
Confirm the side, vehicle year and control type before paint preparation or workshop scheduling begins. The complete OE reference and right exterior mirror position should agree before installation.
What should be checked when 76200-TJA-H01 arrives?
Confirm the mirror adjustment plate before paint preparation to prevent scratches during handling. Inspect the glass, housing, studs, connector and visible lamp before discarding the packaging.
What information is needed to quote 76200-TJA-H01?
Send the OE reference, model year, mirror side, quantity and destination for a wholesale quotation. Connector and rear-mount photographs help separate close variants.
What is supplied with 76200-TJA-H01?
Painted appearance in a photograph does not replace verification of the required housing and electrical content. Use the product photographs and written quotation to confirm the final sales scope.
Which vehicle is 76200-TJA-H01 listed for?
The recorded application is HONDA Greiz 2016. Production date, trim equipment and connector details still require physical verification.
