71514-TME-T10 Bumper Trim Molding for HONDA CR-V 2017 Right
Primary OE reference: 71514-TME-T10
Cross-reference number 1: 71514-TME-T10
Cross-reference number 2: 71514TMET10
Product: Bumper Trim Molding
Vehicle: HONDA CR-V 2017 (standard-spec version)
Installation area: Rear
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-074
Fitment note: check nearby lamp openings; compare the complete OE number; compare the complete OE number before ordering 71514-TME-T10
Product comparison: compare visible edge height; inspect the locator direction; check the panel transition against the removed bumper trim molding
Installation note: check the final perimeter; inspect every screw point; confirm locator engagement on the CR-V
Wholesale enquiry: state the target application; confirm the delivery schedule; retain the product label for HD02005-074
Application guidance: This bumper trim molding is intended for the right rear position on CR-V. Also review facelift differences, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
71514-TME-T10 Bumper Trim Molding Product Overview
For HONDA CR-V 2017 (standard-spec version) exterior repair sourcing, OE reference 71514-TME-T10 points to the listed bumper trim molding. Catalogue code HD02005-074 belongs to the rear area and should be checked as an application-specific component.
This bumper trim molding is intended for the right rear position on CR-V. Also review facelift differences, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
Fitment and Application for CR-V
When comparing 71514-TME-T10 with the removed part, verify the mounting side, compare the removed trim, and confirm the production year. Before final installation, review market-specific styling, compare the mounting direction, and compare every attachment point.
For the listed 2017 application, match the bumper outline, review the end profiles, and match the original clip spacing. During receiving inspection, compare the complete OE number, review facelift differences, and compare every attachment point.
Before the removed component is discarded, match the original clip spacing, review facelift differences, and review market-specific styling. Before the quotation is confirmed, check adjacent garnish pieces, match the stated body style, and confirm the installation position.
Bumper Trim Molding Design and Replacement Notes
Before confirming this verify against the original part bumper trim molding, compare visible edge height, review the outer-edge shape, and compare the original edge profile. For a repeat wholesale order, check the moulding curvature, compare the end termination, and check the panel transition.
For HONDA CR-V 2017 (standard-spec version), check the moulding curvature, review the surface texture, and compare the original length. While reviewing the supplied photographs, inspect the moulding width, check the moulding curvature, and review the surface texture.
When preparing a CR-V exterior repair, compare gloss or plating, compare visible edge height, and compare the end termination. Before final installation, compare the original length, compare the original edge profile, and compare gloss or plating.
For a direct comparison of 71514-TME-T10, confirm the vehicle market, examine the visible finish, confirm the final trim gap, and send original-part photographs. The bumper trim molding should match the original right rear profile before it is installed or released for shipment.
Installation Guidance
When comparing 71514-TME-T10 with the removed part, check lamp-cover clearance, review separate hardware needs, and inspect the surrounding guides. When checking the visible exterior face, protect the visible surface, transfer reusable clips carefully, and retain the removed component.
For the listed 2017 application, confirm an even seated fit, trial-fit without force, and retain the removed component. At the workshop preparation stage, confirm an even seated fit, trial-fit without force, and retain the removed component.
Before the removed component is discarded, protect the visible surface, align the centre first, and transfer reusable clips carefully. For a repeat wholesale order, confirm locator engagement, retain the removed component, and inspect every screw point.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71514-TME-T10 |
| Cross-reference numbers | 71514-TME-T10 71514TMET10 |
| Internal item code | HD02005-074 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2017 |
| Installation area | Rear |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA CR-V 2017 (standard-spec version) |
Wholesale Supply and Packing
Before confirming this verify against the original part bumper trim molding, request supported carton packing, state the target application, and request export quotation terms. Before clips or hardware are transferred, provide the delivery country, support the moulding length, and confirm separate accessory needs.
For HONDA CR-V 2017 (standard-spec version), state the target application, review carton edge protection, and confirm separate accessory needs. During the physical comparison, compare the supplied photographs, check the ordered mounting side, and state annual purchasing volume.
When preparing a CR-V exterior repair, request export quotation terms, request protective inner packing, and include the complete OE number. When checking the visible exterior face, support the moulding length, state the target application, and check the ordered mounting side.
Before commercial confirmation, verify that the offer cites 71514-TME-T10, HD02005-074 and the right application. Ask for packaging that supports the moulding length without rubbing its visible face.
Frequently Asked Questions
Can a photo alone verify 71514-TME-T10?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71514-TME-T10 and HD02005-074 with the removed part dimensions. For CR-V, review facelift differences, compare the end termination, check adjacent panel gaps, and state the target application before installation or quotation.
Is professional installation recommended for 71514-TME-T10?
Yes. A workshop can dry-fit HD02005-074, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For CR-V, match the bumper outline, review nearby cover openings, confirm the final trim gap, and protect projecting locators before installation or quotation.
Can the opposite-side trim replace 71514-TME-T10?
Normally no. The listing specification details the right orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For CR-V, compare the mounting direction, check the panel transition, inspect every screw point, and provide the delivery country before installation or quotation.
What product does OE 71514-TME-T10 identify?
71514-TME-T10 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For CR-V, inspect the original contour, inspect the moulding width, align the centre first, and confirm the packing method before installation or quotation.
How should the position of 71514-TME-T10 be confirmed?
This listing specification details a right component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For CR-V, compare the removed trim, compare gloss or plating, confirm an even seated fit, and confirm separate accessory needs before installation or quotation.
Request a Quote
Send the complete OE reference 71514-TME-T10, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
