71512-TVA-A00 Bumper Trim Molding for HONDA Accord 2018 Center
Primary OE reference: 71512-TVA-A00
Cross-reference number 1: 71512-TVA-A00
Cross-reference number 2: 71512TVAA00
Product: Bumper Trim Molding
Vehicle: HONDA Accord 2018
Installation area: Rear
Side / orientation: Center
Surface detail: verify against the original part
Internal item code: HD02005-014
Fitment note: compare the removed trim; compare every attachment point; match the original clip spacing before ordering 71512-TVA-A00
Product comparison: inspect the moulding width; check the adjoining gap; review the centre alignment against the removed bumper trim molding
Installation note: inspect the surrounding guides; avoid bending long sections; confirm the final trim gap on the Accord
Wholesale enquiry: state the required quantity; retain the product label; confirm the delivery schedule for HD02005-014
Application guidance: 71512-TVA-A00 is listed for HONDA Accord 2018; begin with the center rear profile. Also confirm the vehicle market, review the centre alignment, check adjacent panel gaps, and confirm sample requirements.
71512-TVA-A00 Bumper Trim Molding Product Overview
The subject is a bumper trim molding catalogued as 71512-TVA-A00 for HONDA Accord 2018. Item HD02005-014 uses the stated verify against the original part surface detail, which should be compared with the removed component before shipment.
71512-TVA-A00 is listed for HONDA Accord 2018; begin with the center rear profile. Also confirm the vehicle market, review the centre alignment, check adjacent panel gaps, and confirm sample requirements.
Fitment and Application for Accord
During an OE-led check for HD02005-014, confirm the production year, confirm the installation position, and check adjacent garnish pieces. Before packing the confirmed item, review facelift differences, match the bumper outline, and compare the mounting direction.
For wholesale selection of 71512-TVA-A00, check nearby lamp openings, review market-specific styling, and check the vehicle build date. For a no-force trial fit, review the end profiles, check adjacent garnish pieces, and compare the mounting direction.
Before sourcing this bumper trim molding for Accord, review the end profiles, confirm the vehicle market, and verify the mounting side. While checking adjacent body parts, review market-specific styling, confirm the surface specification, and compare the complete OE number.
Bumper Trim Molding Design and Replacement Notes
During comparison with the original bumper trim, inspect the fastening slots, check the panel transition, and review the surface texture. During receiving inspection, compare gloss or plating, inspect narrow moulding ends, and check the adjoining gap.
For a replacement on the center rear area, review transferred hardware, review nearby cover openings, and examine the visible finish. Before the quotation is confirmed, review the centre alignment, review the surface texture, and review transferred hardware.
When separating nearby Accord trim variants, inspect the moulding width, compare the end termination, and review transferred hardware. Before packing the confirmed item, review the outer-edge shape, inspect the fastening slots, and compare the original length.
For a direct comparison of 71512-TVA-A00, inspect the original contour, compare gloss or plating, protect painted panel edges, and confirm separate accessory needs. The bumper trim molding should match the original center rear profile before it is installed or released for shipment.
Installation Guidance
During an OE-led check for HD02005-014, check lamp-cover clearance, protect painted panel edges, and confirm an even seated fit. While reviewing the supplied photographs, confirm the final trim gap, protect the visible surface, and inspect damaged mounting points.
For wholesale selection of 71512-TVA-A00, confirm an even seated fit, protect the visible surface, and confirm locator engagement. Before final installation, protect painted panel edges, confirm the final trim gap, and inspect damaged mounting points.
Before sourcing this bumper trim molding for Accord, protect the visible surface, trial-fit without force, and align the centre first. During receiving inspection, inspect damaged mounting points, transfer reusable clips carefully, and check adjacent panel gaps.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71512-TVA-A00 |
| Cross-reference numbers | 71512-TVA-A00 71512TVAA00 |
| Internal item code | HD02005-014 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2018 |
| Installation area | Rear |
| Side / orientation | Center |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Accord 2018 |
Wholesale Supply and Packing
During comparison with the original bumper trim, state annual purchasing volume, request protective inner packing, and confirm the surface requirement. At the workshop preparation stage, retain the product label, compare the supplied photographs, and state the destination port.
For a replacement on the center rear area, state the required quantity, inspect the receiving condition, and state annual purchasing volume. For a repeat wholesale order, send original-part photographs, confirm sample requirements, and confirm the packing method.
When separating nearby Accord trim variants, protect projecting locators, retain the product label, and review carton edge protection. While reviewing the supplied photographs, check the ordered mounting side, confirm the packing method, and request protective inner packing.
A structured enquiry for HD02005-014 includes 71512-TVA-A00, Accord vehicle vehicle details, target price basis, packing method and destination. This reduces follow-up and keeps the technical selection visible to purchasing staff.
Frequently Asked Questions
Does 71512-TVA-A00 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Accord, review market-specific styling, inspect the back-side structure, support the trim evenly, and state the required quantity before installation or quotation.
Is a model name alone enough to order 71512-TVA-A00?
No. The Accord name is useful for discovery, but OE number 71512-TVA-A00, VIN or build data, side, finish and physical attachment points should agree. For Accord, match the original clip spacing, compare the end termination, protect painted panel edges, and request export quotation terms before installation or quotation.
What should be inspected when 71512-TVA-A00 arrives?
Check the bumper trim molding part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For Accord, verify the mounting side, review nearby cover openings, transfer reusable clips carefully, and review carton edge protection before installation or quotation.
What information is needed for a 71512-TVA-A00 quotation?
Send HONDA Accord 2018 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Accord, check the vehicle build date, check the panel transition, inspect the surrounding guides, and support the moulding length before installation or quotation.
How should 71512-TVA-A00 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Accord, confirm the vehicle market, inspect the moulding width, check lamp-cover clearance, and send original-part photographs before installation or quotation.
Request a Quote
Send the complete OE reference 71512-TVA-A00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
