71502-TFC-H00 Bumper Corner Trim for HONDA CR-V 2015 Right
Primary OE reference: 71502-TFC-H00
Cross-reference number 1: 71502-TFC-H00
Cross-reference number 2: 71502TFCH00
Product: Bumper Corner Trim
Vehicle: HONDA CR-V 2015
Installation area: Rear
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-069
Fitment note: review facelift differences; confirm the vehicle market; match the bumper outline before ordering 71502-TFC-H00
Product comparison: compare the end termination; inspect the back-side structure; check the moulding curvature against the removed bumper corner trim
Installation note: confirm an even seated fit; review the completed alignment; inspect the surrounding guides on the CR-V
Wholesale enquiry: request supported carton packing; confirm the delivery schedule; support the moulding length for HD02005-069
Application guidance: Before ordering this right trim, compare the old part with 71502-TFC-H00. Also match the bumper outline, compare gloss or plating, clean the mounting channel, and request protective inner packing.
71502-TFC-H00 Bumper Corner Trim Product Overview
HONDA CR-V 2015 buyers can begin identification with 71502-TFC-H00. This bumper corner trim is registered under HD02005-069, with right orientation retained for quotation, sample review and receiving control.
Before ordering this right trim, compare the old part with 71502-TFC-H00. Also match the bumper outline, compare gloss or plating, clean the mounting channel, and request protective inner packing.
Fitment and Application for CR-V
For wholesale selection of 71502-TFC-H00, confirm the surface specification, confirm the vehicle market, and review facelift differences. Before final installation, check nearby lamp openings, check the vehicle build date, and check adjacent garnish pieces.
Before sourcing this bumper corner trim for CR-V, confirm the production year, confirm the installation position, and check adjacent garnish pieces. During receiving inspection, review facelift differences, match the bumper outline, and compare the mounting direction.
Before confirming this verify against the original part bumper corner trim, check nearby lamp openings, review market-specific styling, and check the vehicle build date. Before the quotation is confirmed, review the end profiles, check adjacent garnish pieces, and compare the mounting direction.
Bumper Corner Trim Design and Replacement Notes
For a replacement on the right rear area, compare gloss or plating, check the bumper interface, and compare the original edge profile. For a repeat wholesale order, check the panel transition, compare the original length, and review the outer-edge shape.
When separating nearby CR-V trim variants, check the bumper interface, review nearby cover openings, and compare visible edge height. While reviewing the supplied photographs, inspect the moulding width, review the outer-edge shape, and examine the visible finish.
When comparing 71502-TFC-H00 with the removed part, compare the original edge profile, compare the end termination, and compare gloss or plating. Before final installation, compare the original length, compare visible edge height, and compare the original edge profile.
For a direct comparison of 71502-TFC-H00, compare the mounting direction, review transferred hardware, review the completed alignment, and state annual purchasing volume. The bumper corner trim should match the original right rear profile before it is installed or released for shipment.
Installation Guidance
For wholesale selection of 71502-TFC-H00, align the centre first, inspect every screw point, and confirm the final trim gap. When checking the visible exterior face, check adjacent panel gaps, review separate hardware needs, and protect the visible surface.
Before sourcing this bumper corner trim for CR-V, retain the removed component, confirm the fitting direction, and check the final perimeter. At the workshop preparation stage, inspect the surrounding guides, support the trim evenly, and align the centre first.
Before confirming this verify against the original part bumper corner trim, check the final perimeter, support the trim evenly, and check adjacent panel gaps. For a repeat wholesale order, confirm the fitting direction, inspect the surrounding guides, and align the centre first.
Product Technical Specifications
| Product type | Bumper Corner Trim |
|---|---|
| Primary OE reference | 71502-TFC-H00 |
| Cross-reference numbers | 71502-TFC-H00 71502TFCH00 |
| Internal item code | HD02005-069 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2015 |
| Installation area | Rear |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA CR-V 2015 |
Wholesale Supply and Packing
For a replacement on the right rear area, request protective inner packing, provide the delivery country, and include the complete OE number. Before clips or hardware are transferred, request supported carton packing, support the moulding length, and retain the product label.
When separating nearby CR-V trim variants, request supported carton packing, confirm sample requirements, and check the ordered mounting side. During the physical comparison, confirm the delivery schedule, include the complete OE number, and inspect the receiving condition.
When comparing 71502-TFC-H00 with the removed part, state the target application, state the destination port, and request supported carton packing. When checking the visible exterior face, confirm separate accessory needs, request protective inner packing, and support the moulding length.
Order review for 71502-TFC-H00 should connect supplier code HD02005-069 with the rear application, buyer-approved photos and logistics instructions. Keep the same identifiers on samples and shipping paperwork.
Frequently Asked Questions
Can a photo alone verify 71502-TFC-H00?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71502-TFC-H00 and HD02005-069 with the removed part dimensions. For CR-V, match the stated body style, compare visible edge height, inspect damaged mounting points, and include the complete OE number before installation or quotation.
Is professional installation recommended for 71502-TFC-H00?
Yes. A workshop can dry-fit HD02005-069, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For CR-V, review market-specific styling, review the surface texture, review the completed alignment, and confirm the delivery schedule before installation or quotation.
Can the opposite-side trim replace 71502-TFC-H00?
Normally no. The listing specification details the right orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For CR-V, match the original clip spacing, review the outer-edge shape, retain the removed component, and check the ordered mounting side before installation or quotation.
What product does OE 71502-TFC-H00 identify?
71502-TFC-H00 is listed here as a bumper corner trim. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For CR-V, verify the mounting side, inspect narrow moulding ends, protect the visible surface, and confirm sample requirements before installation or quotation.
How should the position of 71502-TFC-H00 be confirmed?
This listing specification details a right component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For CR-V, check the vehicle build date, compare the original edge profile, review separate hardware needs, and request supported carton packing before installation or quotation.
Request a Quote
Send the complete OE reference 71502-TFC-H00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
