71190-THA-A01 Front Left Headlight Mounting Bracket for HONDA Avancier 2017

71190-THA-A01 Front Left Headlight Mounting Bracket Product Overview

The component shown under 71190-THA-A01 is a front left headlight mounting bracket intended for HONDA Avancier 2017. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Avancier

When comparing 71190-THA-A01 with the removed component, verify the left or right mounting side, confirm whether the vehicle uses a special appearance package, and compare the installation direction. For an application-specific order, review facelift and pre-facelift styling, confirm the exact model year before placing the order, and check whether the original part is mirrored.

For the listed 2017 application, match the outer profile around the headlamp, compare the installation direction, and review headlamp shape changes between production phases. During receiving inspection, match the body style and equipment grade, review facelift and pre-facelift styling, and match the locator-slot arrangement.

Before the original trim or bracket is discarded, match the locator-slot arrangement, verify the left or right mounting side, and verify the trim package named in the application. When organizing mixed-OE inventory, review facelift and pre-facelift styling, match the accessory to the original bumper revision, and confirm the decorative finish or painted surface.

Headlight Mounting Bracket Design and Replacement Notes

Before confirming this headlight accessory, check the interface with the lamp housing, inspect the overall frame width, and compare surrounding grille openings. For a repeat wholesale purchase, review the thickness around each mounting boss, check the depth of the moulded locator channels, and inspect the visible face for transport scuffing.

For a body-shop order covering HONDA, compare surrounding grille openings, check the curvature beside the headlamp, and review nearby cover openings. During the physical comparison, review the distance between fastening points, check the adjoining panel gap, and review the thickness around each mounting boss.

When comparing 71190-THA-A01 with the removed component, check the depth of the moulded locator channels, compare mounting-hole height, and check the transition to the bumper or grille. When checking the headlamp opening, compare gloss level with the neighbouring trim, inspect the overall frame width, and compare the visible texture and finish.

Application-Specific Identification

When the headlamp outline is reviewed with 71190-THA-A01 on the Avancier 2017: confirm the decorative finish or painted surface. The HD02009-099 sample for the left side should review the direction of the locating tabs. Before installation, tighten hardware only after alignment; for a quotation, send photographs of the removed component.

Before workshop installation with 71190-THA-A01 on the Avancier 2017: confirm the front installation position. The HD02009-099 sample for the left side should inspect both end geometries. Before installation, compare the installed height with the opposite side; for a quotation, confirm the packing method.

OE identification begins with 71190-THA-A01 on the Avancier 2017: check the relationship with the lamp housing. The HD02009-099 sample for the left side should check the interface with the lamp housing. Before installation, photograph the completed installation for order records; for a quotation, confirm sample-order requirements.

Installation Guidance

When reviewing the visible finish on HD02009-099, review whether separate hardware is needed, compare the installed height with the opposite side, and check the finish for tool marks before delivery. For a no-force trial fit, inspect broken vehicle-side mounts, protect exposed edges during removal, and complete a visual check under even lighting.

Before sourcing this front left headlight mounting bracket, verify that the headlamp remains centred, trial-fit the component without force, and tighten hardware only after alignment. While checking adjacent body parts, align the headlamp edge before fastening, complete a visual check under even lighting, and inspect broken vehicle-side mounts.

Before confirming this headlight accessory, check that no locator is trapped behind the bumper, use hand pressure only during the initial engagement, and check the finish for tool marks before delivery. Before the quotation is confirmed, ensure that all removed hardware is accounted for, protect painted and chrome surfaces, and inspect broken vehicle-side mounts.

Product Technical Specifications

Wholesale Supply and Packing

For replacement in the left front headlamp area, confirm the packing method, separate painted and unpainted variants, and state the target vehicle application. When organizing mixed-OE inventory, state whether left and right pairs should be bundled, confirm the required finish, and request protective inner wrapping.

When separating nearby Avancier variants, specify whether the order is for service stock or a project, request corner protection for long moulded parts, and confirm barcode or private-label requirements. While reviewing the supplied photographs, provide the consignee contact information, state whether left and right pairs should be bundled, and ask for carton dimensions before freight booking.

When reviewing the visible finish on HD02009-099, confirm the preferred incoterm, agree the acceptable delivery window, and support long trim sections during transit. Before final installation, state estimated annual purchasing volume, request corner protection for long moulded parts, and state any outer-carton marking requirements.

Frequently Asked Questions

Is a sample order available for 71190-THA-A01?

Sample and wholesale arrangements can be discussed after the OE reference, vehicle application, required side, quantity and destination are provided. For Avancier, match the accessory to the original bumper revision; compare the original edge profile; replace distorted clips before final assembly; and request protective inner wrapping before fitting or quotation.

What information should be sent with a 71190-THA-A01 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For Avancier, match the body style and equipment grade; compare the profile below the lamp lens; use hand pressure only during the initial engagement; and confirm pallet requirements for larger quantities before fitting or quotation.

Should damaged vehicle-side mounts be checked before fitting 71190-THA-A01?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For Avancier, check the relationship with the lamp housing; inspect the overall frame width; photograph the completed installation for order records; and confirm the required finish before fitting or quotation.

Can photographs alone confirm 71190-THA-A01 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For Avancier, compare adjacent bumper and grille sections; check the adjoining panel gap; trial-fit the component without force; and state estimated annual purchasing volume before fitting or quotation.

Can 71190-THA-A01 fit every Avancier model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For Avancier, compare the installation direction; compare the centre alignment point; confirm that every locator engages; and state whether left and right pairs should be bundled before fitting or quotation.

Request a Quote

Send the complete OE reference 71190-THA-A01, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.