71190-TEA-T00 Front Left Headlight Mounting Bracket for HONDA Civic 2016

71190-TEA-T00 Front Left Headlight Mounting Bracket Product Overview

The component shown under 71190-TEA-T00 is a front left headlight mounting bracket intended for HONDA Civic 2016. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Civic

For HONDA Civic 2016, review facelift and pre-facelift styling, verify that the grille design matches the stated application, and confirm the destination-market version. At the alignment stage, confirm the front installation position, check the lamp manufacturer where multiple units were fitted, and compare the installation direction.

When preparing a Civic body repair, check nearby body-panel interfaces, confirm the destination-market version, and verify the trim package named in the application. For a no-force trial fit, review headlamp shape changes between production phases, check the lamp manufacturer where multiple units were fitted, and confirm the exact model year before placing the order.

During comparison with the original lamp surround, verify the trim package named in the application, retain the original component for a direct comparison, and confirm the destination-market version. While checking adjacent body parts, match the body style and equipment grade, check nearby body-panel interfaces, and verify that the grille design matches the stated application.

Headlight Mounting Bracket Design and Replacement Notes

For the listed 2016 application, measure the removed part where references are unclear, inspect the back-side support structure, and check the interface with the lamp housing. During receiving inspection, review nearby cover openings, compare mounting-hole height, and inspect the overall frame width.

Before the original trim or bracket is discarded, review the outer-edge shape, compare gloss level with the neighbouring trim, and review fastening slots and clip seats. When organizing mixed-OE inventory, check the interface with the lamp housing, review the thickness around each mounting boss, and review the direction of the locating tabs.

For HONDA Civic 2016, compare the profile below the lamp lens, measure the removed part where references are unclear, and compare the original edge profile. While reviewing the supplied photographs, confirm decorative surface details, compare the visible texture and finish, and check the depth of the moulded locator channels.

Application-Specific Identification

A vehicle-side comparison starts with 71190-TEA-T00 on the Civic 2016: verify that the grille design matches the stated application. The HD02009-033 sample for the left side should compare the visible texture and finish. Before installation, route nearby wiring away from sharp edges; for a quotation, confirm whether clips are required separately.

A trim-level comparison requires with 71190-TEA-T00 on the Civic 2016: match the body style and equipment grade. The HD02009-033 sample for the left side should review the thickness around each mounting boss. Before installation, check the final perimeter around the lamp; for a quotation, request protective inner wrapping.

For side-specific inventory control with 71190-TEA-T00 on the Civic 2016: match the outer profile around the headlamp. The HD02009-033 sample for the left side should review nearby cover openings. Before installation, review whether separate hardware is needed; for a quotation, request supported export-carton packing.

Installation Guidance

For a body-shop order covering HONDA, inspect broken vehicle-side mounts, inspect each screw or clip point, and inspect the surrounding guides. During the physical comparison, route nearby wiring away from sharp edges, check the finish for tool marks before delivery, and trial-fit the component without force.

When comparing 71190-TEA-T00 with the removed component, check lamp-to-trim clearance, reinstall removed seals in their original positions, and confirm that every locator engages. When checking the headlamp opening, replace distorted clips before final assembly, inspect broken vehicle-side mounts, and tighten hardware only after alignment.

For the listed 2016 application, confirm an evenly seated fit, review completed left-to-right alignment, and inspect the surrounding guides. Before the carton is sealed, confirm a consistent bumper gap, verify that the headlamp remains centred, and tighten hardware only after alignment.

Product Technical Specifications

Wholesale Supply and Packing

Before sourcing this front left headlight mounting bracket, include the complete OE reference, state estimated annual purchasing volume, and ask for carton dimensions before freight booking. While checking adjacent body parts, provide the destination country, compare the supplied product photographs, and provide the consignee contact information.

Before confirming this headlight accessory, retain the product and carton labels, confirm the preferred incoterm, and confirm sample-order requirements. Before the quotation is confirmed, list every OE reference on the purchase order, state the target vehicle application, and request moisture protection for sea freight.

For a body-shop order covering HONDA, check the ordered mounting side, separate left and right items in the packing list, and ask for carton dimensions before freight booking. Before packing the confirmed item, confirm the nominated freight forwarder, send photographs of the removed component, and retain the product and carton labels.

Frequently Asked Questions

Why must left and right versions of 71190-TEA-T00 be distinguished?

Headlight-area accessories are usually side-specific. Their curves, holes and locator positions should not be assumed interchangeable. For Civic, check the lamp manufacturer where multiple units were fitted; review the distance between fastening points; verify that the headlamp remains centred; and confirm replacement-part documentation needs before fitting or quotation.

How should 71190-TEA-T00 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For Civic, match the locator-slot arrangement; review the direction of the locating tabs; confirm a consistent bumper gap; and check the ordered mounting side before fitting or quotation.

Does the finish specification matter for 71190-TEA-T00?

Yes. Different vehicle grades can change colour, coating, visible texture and locating details, so compare the original part carefully. For Civic, retain the original component for a direct comparison; review fastening slots and clip seats; inspect the surrounding guides; and list every OE reference on the purchase order before fitting or quotation.

Does 71190-TEA-T00 include a complete headlamp assembly?

No. This page covers the pictured front left headlight mounting bracket. Lamps, bulbs, wiring, modules and separate fasteners are not included unless visibly shown in the product photographs. For Civic, compare the stamped or moulded reference; review narrow tips for transport damage; review completed left-to-right alignment; and protect projecting locator tabs before fitting or quotation.

Are clips and screws supplied with 71190-TEA-T00?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For Civic, compare adjacent bumper and grille sections; inspect the back-side support structure; confirm an evenly seated fit; and separate left and right items in the packing list before fitting or quotation.

Request a Quote

Send the complete OE reference 71190-TEA-T00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.