71180-TBA-K50 Front Right Fog Light Bezel for HONDA Civic 2019

71180-TBA-K50 Front Right Fog Light Bezel Product Overview

The product shown under 71180-TBA-K50 is a front right fog light bezel intended for HONDA Civic 2019. Check the right orientation, lamp opening, mounting tabs and chrome-finish specification against the original component.

Fitment and Application for Civic

Before the removed bezel is discarded, review facelift styling, compare the original grille section, and check adjacent bumper parts. Before clips or hardware are transferred, confirm the vehicle market, confirm the model year, and verify the mounting side.

During an OE-led review for HD02008-064, check adjacent bumper parts, confirm the bumper position, and confirm the model year. During the physical comparison, confirm the surface finish, check the nearby lamp opening, and compare the full OE marking.

For wholesale selection of 71180-TBA-K50, confirm the model year, match the stated trim level, and review market-version differences. When checking the bumper opening, verify the mounting side, inspect the removed bezel, and compare every fixing tab.

Front Right Fog Light Bezel Design and Replacement Notes

When preparing a Civic bumper repair, review the outer-edge shape, review fastening slots, and check the lamp interface. For a no-force trial fit, review locator direction, check the adjoining gap, and confirm decorative finish details.

During comparison with the original lamp surround, check the bezel curvature, inspect the moulded face, and review the outer-edge shape. While checking adjacent body parts, review nearby cover openings, measure the original length, and review narrow bezel ends.

For replacement in the right front area, inspect reinforcement ribs, compare transferred hardware, and check the lamp interface. Before clips or hardware are transferred, inspect the frame width, compare vent or grille openings, and review locator direction.

Application-Specific Identification Notes

When the bumper opening is reviewed with 71180-TBA-K50 on the Civic 2019: check the nearby lamp opening. The HD02008-064 sample for the right side should compare vent or grille openings. For HONDA identification, 71180-TBA-K50 also requires technicians to support the bumper cover evenly. A buyer quoting HD02008-064 should include the complete OE reference for the HONDA Civic 2019 order.

For application-specific sourcing with 71180-TBA-K50 on the Civic 2019: review market-version differences. The HD02008-064 sample for the right side should check the adjoining gap. For HONDA identification, 71180-TBA-K50 also requires technicians to review separate hardware needs. A buyer quoting HD02008-064 should request protective inner wrapping for the HONDA Civic 2019 order.

Before a replacement is packed with 71180-TBA-K50 on the Civic 2019: review the bezel orientation. The HD02008-064 sample for the right side should compare mounting-hole height. For HONDA identification, 71180-TBA-K50 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-064 should retain the product label for the HONDA Civic 2019 order.

A vehicle-side comparison starts with 71180-TBA-K50 on the Civic 2019: compare the installation direction. The HD02008-064 sample for the right side should compare mounting-hole height. For HONDA identification, 71180-TBA-K50 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-064 should state the target vehicle for the HONDA Civic 2019 order.

Installation Guidance

Before the removed bezel is discarded, check adjacent panel gaps, protect nearby painted surfaces, and inspect the surrounding guides. Before the quotation is confirmed, protect exposed panel edges, avoid bending moulded tabs, and align the lamp opening first.

During an OE-led review for HD02008-064, confirm the fitting direction, protect exposed panel edges, and review separate hardware needs. Before packing the confirmed item, check the final perimeter, confirm an evenly seated fit, and review the completed alignment.

For wholesale selection of 71180-TBA-K50, inspect the surrounding guides, transfer reusable clips carefully, and review separate hardware needs. For a no-force trial fit, protect nearby painted surfaces, check lamp-to-bezel clearance, and confirm the finished bumper gap.

Product Technical Specifications

Wholesale Supply and Packing

When preparing a Civic bumper repair, request export quotation terms, state annual purchasing volume, and check the ordered mounting side. Before final installation, compare the supplied photographs, confirm separate clip requirements, and review carton edge protection.

During comparison with the original lamp surround, provide the delivery country, inspect receiving condition, and check the ordered mounting side. During receiving inspection, state the required quantity, support the bezel during transit, and compare the supplied photographs.

For replacement in the right front area, support the bezel during transit, send photographs of the removed part, and state the destination port. Before the quotation is confirmed, compare the supplied photographs, retain the product label, and confirm the required finish.

Frequently Asked Questions

Does 71180-TBA-K50 include the complete lamp assembly?

No. This listing covers the pictured front right fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Civic, match the outer contour, inspect the moulded face, protect nearby painted surfaces, and confirm the required finish before installation or quotation.

How should 71180-TBA-K50 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Civic, review the bezel orientation, compare the original edge profile, trial-fit the bezel without force, and request supported carton packing before installation or quotation.

What vehicle application is listed for 71180-TBA-K50?

71180-TBA-K50 is presented for HONDA Civic 2019. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Civic, match the locating-slot layout, review locator direction, align the lamp opening first, and protect projecting locator tabs before installation or quotation.

Can photographs alone confirm 71180-TBA-K50 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Civic, inspect the lamp aperture size, check the bezel curvature, inspect damaged mounting points, and support the bezel during transit before installation or quotation.

Does trim specification matter for 71180-TBA-K50?

Yes. chrome-finish can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For Civic, match the stated trim level, compare the centre alignment, transfer reusable clips carefully, and inspect receiving condition before installation or quotation.

Request a Quote

Send the complete OE reference 71180-TBA-K50, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.