71140-TVE-H00 Front Right Headlight Mounting Bracket for HONDA Accord 2018

71140-TVE-H00 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-TVE-H00 is a front right headlight mounting bracket intended for HONDA Accord 2018. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Accord

When comparing 71140-TVE-H00 with the removed component, match the locator-slot arrangement, confirm the front installation position, and compare the complete OE marking with the removed part. For an application-specific order, verify the trim package named in the application, review the orientation of the moulded bracket, and retain the original component for a direct comparison.

For the listed 2018 application, check whether the original part is mirrored, compare the complete OE marking with the removed part, and check the relationship with the lamp housing. During receiving inspection, confirm the decorative finish or painted surface, verify the trim package named in the application, and verify that the grille design matches the stated application.

Before the original trim or bracket is discarded, verify that the grille design matches the stated application, match the locator-slot arrangement, and verify the left or right mounting side. When organizing mixed-OE inventory, verify the trim package named in the application, review facelift and pre-facelift styling, and match the accessory to the original bumper revision.

Headlight Mounting Bracket Design and Replacement Notes

Before confirming this headlight accessory, confirm decorative surface details, inspect moulded corners before installation, and inspect the junction with the fender edge. For a repeat wholesale purchase, review the distance between fastening points, compare the original edge profile, and compare the centre alignment point.

For a body-shop order covering HONDA, inspect the junction with the fender edge, compare the visible texture and finish, and compare surrounding grille openings. During the physical comparison, check the curvature beside the headlamp, review nearby cover openings, and review the distance between fastening points.

When comparing 71140-TVE-H00 with the removed component, compare the original edge profile, check mirrored geometry against the required side, and compare reusable clips and hardware. When checking the headlamp opening, review the direction of the locating tabs, inspect moulded corners before installation, and measure the removed part where references are unclear.

Application-Specific Identification

At receiving inspection with 71140-TVE-H00 on the Accord 2018: check the relationship with the lamp housing. The HD02009-010 sample for the right side should inspect the overall frame width. Before installation, support adjacent body panels evenly; for a quotation, provide the consignee contact information.

For application-specific sourcing with 71140-TVE-H00 on the Accord 2018: check the vehicle production date where available. The HD02009-010 sample for the right side should compare the centre alignment point. Before installation, confirm that the hood and fender clearances remain even; for a quotation, confirm the nominated freight forwarder.

At receiving inspection with 71140-TVE-H00 on the Accord 2018: compare the headlight outline at both ends. The HD02009-010 sample for the right side should compare gloss level with the neighbouring trim. Before installation, confirm that the hood and fender clearances remain even; for a quotation, request protective inner wrapping.

Installation Guidance

When reviewing the visible finish on HD02009-010, inspect each screw or clip point, verify that the headlamp remains centred, and use hand pressure only during the initial engagement. For a no-force trial fit, protect painted and chrome surfaces, check lamp-to-trim clearance, and confirm a consistent bumper gap.

Before sourcing this front right headlight mounting bracket, review completed left-to-right alignment, clean the lamp and bumper mounting area, and inspect the surrounding guides. While checking adjacent body parts, support adjacent body panels evenly, confirm a consistent bumper gap, and protect painted and chrome surfaces.

Before confirming this headlight accessory, compare the installed height with the opposite side, check that no locator is trapped behind the bumper, and use hand pressure only during the initial engagement. Before the quotation is confirmed, check the finish for tool marks before delivery, ensure that all removed hardware is accounted for, and protect painted and chrome surfaces.

Product Technical Specifications

Wholesale Supply and Packing

For replacement in the right front headlamp area, confirm sample-order requirements, provide the consignee contact information, and include the complete OE reference. When organizing mixed-OE inventory, confirm the requested delivery schedule, request a packing-list breakdown by item code, and confirm whether clips are required separately.

When separating nearby Accord variants, state estimated annual purchasing volume, request the applicable export terms, and confirm the packing method. While reviewing the supplied photographs, state the destination port or city, confirm the requested delivery schedule, and request protective inner wrapping.

When reviewing the visible finish on HD02009-010, separate left and right items in the packing list, list every OE reference on the purchase order, and confirm replacement-part documentation needs. Before final installation, inspect the carton at receiving, request the applicable export terms, and confirm barcode or private-label requirements.

Frequently Asked Questions

Does 71140-TVE-H00 include a complete headlamp assembly?

No. This page covers the pictured front right headlight mounting bracket. Lamps, bulbs, wiring, modules and separate fasteners are not included unless visibly shown in the product photographs. For Accord, verify the left or right mounting side; compare the original edge profile; tighten hardware only after alignment; and review edge protection inside the carton before fitting or quotation.

Are clips and screws supplied with 71140-TVE-H00?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For Accord, review the orientation of the moulded bracket; compare the profile below the lamp lens; align the headlamp edge before fastening; and support long trim sections during transit before fitting or quotation.

Which side uses 71140-TVE-H00?

This front right headlight mounting bracket is catalogued for the right front headlamp area. Opposite-side parts normally use mirrored geometry and a different reference. For Accord, check whether the original part is mirrored; inspect the overall frame width; complete a visual check under even lighting; and send photographs of the removed component before fitting or quotation.

What should be inspected when 71140-TVE-H00 arrives?

Check the item label, contour, finish, locating features, mounting points and carton condition before fitting or discarding the packaging. For Accord, match the body style and equipment grade; check the adjoining panel gap; inspect broken vehicle-side mounts; and check sample approval before mass shipment before fitting or quotation.

Which vehicle application is listed for 71140-TVE-H00?

71140-TVE-H00 is listed for HONDA Accord 2018. The complete OE reference, production year, body specification and mounting side should agree with the removed component. For Accord, check the vehicle production date where available; compare the centre alignment point; compare the installed height with the opposite side; and confirm pallet requirements for larger quantities before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-TVE-H00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.