71140-TL0-G01 Front Right Headlight Mounting Bracket for HONDA Spirior 2009

71140-TL0-G01 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-TL0-G01 is a front right headlight mounting bracket intended for HONDA Spirior 2009. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Spirior

During comparison with the original lamp surround, confirm whether the vehicle uses a special appearance package, match the accessory to the original bumper revision, and check the lamp manufacturer where multiple units were fitted. While checking adjacent body parts, verify that the grille design matches the stated application, compare the complete OE marking with the removed part, and confirm the exact model year before placing the order.

Before confirming export packing for 71140-TL0-G01, match the body style and equipment grade, check the vehicle production date where available, and compare the headlight outline at both ends. Before the quotation is confirmed, compare the complete OE marking with the removed part, review facelift and pre-facelift styling, and confirm the destination-market version.

During an OE-led review for HD02009-028, confirm the front installation position, check the lamp manufacturer where multiple units were fitted, and compare the installation direction. Before packing the confirmed item, check the relationship with the lamp housing, match the accessory to the original bumper revision, and match the locator-slot arrangement.

Headlight Mounting Bracket Design and Replacement Notes

For HONDA Spirior 2009, review the direction of the locating tabs, inspect reinforcement features behind the part, and review nearby cover openings. While reviewing the supplied photographs, inspect moulded corners before installation, inspect the visible face for transport scuffing, and review fastening slots and clip seats.

When preparing a Spirior body repair, compare the visible texture and finish, compare the profile below the lamp lens, and check the adjoining panel gap. Before final installation, compare gloss level with the neighbouring trim, inspect the back-side support structure, and inspect the moulded front face and rear ribs.

During comparison with the original lamp surround, inspect the back-side support structure, check the interface with the lamp housing, and review nearby cover openings. At the workshop preparation stage, compare mounting-hole height, inspect the overall frame width, and review the outer-edge shape.

Application-Specific Identification

For side-specific inventory control with 71140-TL0-G01 on the Spirior 2009: review facelift and pre-facelift styling. The HD02009-028 sample for the right side should review narrow tips for transport damage. Before installation, reinstall removed seals in their original positions; for a quotation, state the target vehicle application.

Before workshop installation with 71140-TL0-G01 on the Spirior 2009: compare every locating point and screw opening. The HD02009-028 sample for the right side should confirm decorative surface details. Before installation, inspect each screw or clip point; for a quotation, confirm whether clips are required separately.

A trim-level comparison requires with 71140-TL0-G01 on the Spirior 2009: confirm the front installation position. The HD02009-028 sample for the right side should review fastening slots and clip seats. Before installation, inspect broken vehicle-side mounts; for a quotation, request moisture protection for sea freight.

Installation Guidance

For the listed 2009 application, clean the lamp and bumper mounting area, confirm the correct fitting direction, and route nearby wiring away from sharp edges. Before the carton is sealed, protect painted and chrome surfaces, review whether separate hardware is needed, and reinstall removed seals in their original positions.

Before the original trim or bracket is discarded, transfer reusable clips carefully, check that no locator is trapped behind the bumper, and check lamp-to-trim clearance. Before clips or hardware are transferred, verify that no fastener is cross-threaded, check the final perimeter around the lamp, and clean the lamp and bumper mounting area.

For HONDA Spirior 2009, inspect each screw or clip point, inspect the surrounding guides, and route nearby wiring away from sharp edges. At the alignment stage, check the finish for tool marks before delivery, trial-fit the component without force, and keep the removed part nearby for comparison.

Product Technical Specifications

Wholesale Supply and Packing

For a body-shop order covering HONDA, send photographs of the removed component, request protective inner wrapping, and confirm replacement-part documentation needs. Before packing the confirmed item, confirm the packing method, request a packing-list breakdown by item code, and check the ordered mounting side.

When comparing 71140-TL0-G01 with the removed component, inspect the carton at receiving, state the target vehicle application, and compare the supplied product photographs. For an application-specific order, request the applicable export terms, confirm the requested delivery schedule, and identify mixed-OE orders clearly.

For the listed 2009 application, compare the supplied product photographs, provide the consignee contact information, and confirm replacement-part documentation needs. During receiving inspection, review edge protection inside the carton, request corner protection for long moulded parts, and check sample approval before mass shipment.

Frequently Asked Questions

Should damaged vehicle-side mounts be checked before fitting 71140-TL0-G01?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For Spirior, check nearby body-panel interfaces; inspect both end geometries; inspect broken vehicle-side mounts; and request supported export-carton packing before fitting or quotation.

Can photographs alone confirm 71140-TL0-G01 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For Spirior, check whether the original part is mirrored; compare the centre alignment point; confirm an evenly seated fit; and request supported export-carton packing before fitting or quotation.

Can 71140-TL0-G01 fit every Spirior model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For Spirior, compare the complete OE marking with the removed part; check the curvature beside the headlamp; confirm that the hood and fender clearances remain even; and request supported export-carton packing before fitting or quotation.

Is workshop installation recommended for 71140-TL0-G01?

Yes. A body or lighting workshop can inspect damaged mounts on the Spirior, align adjoining panels and avoid forcing a part intended for another version. For Spirior, check the relationship with the lamp housing; review the direction of the locating tabs; align the headlamp edge before fastening; and request supported export-carton packing before fitting or quotation.

Why must left and right versions of 71140-TL0-G01 be distinguished?

Headlight-area accessories are usually side-specific. Their curves, holes and locator positions should not be assumed interchangeable. For Spirior, confirm the decorative finish or painted surface; compare the original edge profile; check the final perimeter around the lamp; and request supported export-carton packing before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-TL0-G01, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.