71140-TA0-A00 Front Right Headlight Mounting Bracket for HONDA Accord 2008

71140-TA0-A00 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-TA0-A00 is a front right headlight mounting bracket intended for HONDA Accord 2008. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Accord

When separating nearby Accord variants, check the vehicle production date where available, confirm the exact model year before placing the order, and compare the headlight outline at both ends. While reviewing the supplied photographs, match the outer profile around the headlamp, compare the complete OE marking with the removed part, and inspect the original lamp-support geometry.

When reviewing the visible finish on HD02009-004, compare the installation direction, compare the headlight outline at both ends, and compare the stamped or moulded reference. Before final installation, match the accessory to the original bumper revision, compare the complete OE marking with the removed part, and review regional specification differences.

Before sourcing this front right headlight mounting bracket, compare the stamped or moulded reference, check the relationship with the lamp housing, and compare the headlight outline at both ends. At the workshop preparation stage, verify the left or right mounting side, compare the installation direction, and confirm the exact model year before placing the order.

Headlight Mounting Bracket Design and Replacement Notes

During left-versus-right inventory selection, review the outer-edge shape, confirm decorative surface details, and compare surrounding grille openings. Before the carton is sealed, check mirrored geometry against the required side, inspect moulded corners before installation, and review the thickness around each mounting boss.

For replacement in the right front headlamp area, compare the profile below the lamp lens, check the curvature beside the headlamp, and compare reusable clips and hardware. Before clips or hardware are transferred, compare surrounding grille openings, inspect the visible face for transport scuffing, and compare the visible texture and finish.

When separating nearby Accord variants, inspect the moulded front face and rear ribs, review the outer-edge shape, and check the transition to the bumper or grille. At the alignment stage, inspect the junction with the fender edge, inspect the back-side support structure, and review the direction of the locating tabs.

Application-Specific Identification

A trim-level comparison requires with 71140-TA0-A00 on the Accord 2008: check whether the original part is mirrored. The HD02009-004 sample for the right side should compare surrounding grille openings. Before installation, align the headlamp edge before fastening; for a quotation, specify whether the order is for service stock or a project.

A vehicle-side comparison starts with 71140-TA0-A00 on the Accord 2008: compare the installation direction. The HD02009-004 sample for the right side should review the distance between fastening points. Before installation, complete a visual check under even lighting; for a quotation, specify whether the order is for service stock or a project.

Before workshop installation with 71140-TA0-A00 on the Accord 2008: compare the installation direction. The HD02009-004 sample for the right side should measure the removed part where references are unclear. Before installation, protect exposed edges during removal; for a quotation, state the required order quantity.

Installation Guidance

During an OE-led review for HD02009-004, complete a visual check under even lighting, use hand pressure only during the initial engagement, and clean the lamp and bumper mounting area. Before packing the confirmed item, check the adjoining panel gaps, protect exposed edges during removal, and verify that the headlamp remains centred.

For wholesale selection of 71140-TA0-A00, confirm that the hood and fender clearances remain even, avoid bending narrow moulded tabs, and route nearby wiring away from sharp edges. For an application-specific order, transfer reusable clips carefully, complete a visual check under even lighting, and trial-fit the component without force.

During left-versus-right inventory selection, photograph the completed installation for order records, ensure that all removed hardware is accounted for, and clean the lamp and bumper mounting area. During receiving inspection, support adjacent body panels evenly, protect painted and chrome surfaces, and trial-fit the component without force.

Product Technical Specifications

Wholesale Supply and Packing

During comparison with the original lamp surround, ask for carton dimensions before freight booking, provide the destination country, and compare the supplied product photographs. At the workshop preparation stage, provide the consignee contact information, confirm replacement-part documentation needs, and review edge protection inside the carton.

Before confirming export packing for 71140-TA0-A00, separate painted and unpainted variants, check the ordered mounting side, and confirm the nominated freight forwarder. For a repeat wholesale purchase, state estimated annual purchasing volume, request a packing-list breakdown by item code, and request the applicable export terms.

During an OE-led review for HD02009-004, state the required order quantity, support long trim sections during transit, and compare the supplied product photographs. During the physical comparison, request protective inner wrapping, state whether left and right pairs should be bundled, and separate painted and unpainted variants.

Frequently Asked Questions

Can photographs alone confirm 71140-TA0-A00 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For Accord, match the outer profile around the headlamp; compare reusable clips and hardware; review completed left-to-right alignment; and agree the acceptable delivery window before fitting or quotation.

Can 71140-TA0-A00 fit every Accord model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For Accord, match the outer profile around the headlamp; review fastening slots and clip seats; inspect the lamp aim after surrounding parts are refitted; and include the complete OE reference before fitting or quotation.

Is workshop installation recommended for 71140-TA0-A00?

Yes. A body or lighting workshop can inspect damaged mounts on the Accord, align adjoining panels and avoid forcing a part intended for another version. For Accord, match the outer profile around the headlamp; inspect the moulded front face and rear ribs; check the adjoining panel gaps; and inspect the carton at receiving before fitting or quotation.

Why must left and right versions of 71140-TA0-A00 be distinguished?

Headlight-area accessories are usually side-specific. Their curves, holes and locator positions should not be assumed interchangeable. For Accord, match the outer profile around the headlamp; compare the profile below the lamp lens; confirm a consistent bumper gap; and confirm whether clips are required separately before fitting or quotation.

How should 71140-TA0-A00 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For Accord, match the outer profile around the headlamp; review the outer-edge shape; check the finish for tool marks before delivery; and confirm the packing method before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-TA0-A00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.