71140-SWA-000 Front Right Headlight Mounting Bracket for HONDA CR-V 2007

71140-SWA-000 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-SWA-000 is a front right headlight mounting bracket intended for HONDA CR-V 2007. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for CR-V

Before sourcing this front right headlight mounting bracket, check nearby body-panel interfaces, match the locator-slot arrangement, and compare the installation direction. At the workshop preparation stage, confirm the destination-market version, inspect the original lamp-support geometry, and compare the headlight outline at both ends.

Before confirming this headlight accessory, verify the trim package named in the application, confirm the exact model year before placing the order, and match the outer profile around the headlamp. For a repeat wholesale purchase, inspect the original lamp-support geometry, verify that the grille design matches the stated application, and confirm the front installation position.

For a body-shop order covering HONDA, check the lamp manufacturer where multiple units were fitted, compare the installation direction, and check the relationship with the lamp housing. During the physical comparison, match the accessory to the original bumper revision, match the locator-slot arrangement, and compare every locating point and screw opening.

Headlight Mounting Bracket Design and Replacement Notes

When separating nearby CR-V variants, check the curvature beside the headlamp, review narrow tips for transport damage, and compare mounting-hole height. At the alignment stage, review the thickness around each mounting boss, inspect the moulded front face and rear ribs, and check the transition to the bumper or grille.

When reviewing the visible finish on HD02009-074, inspect reinforcement features behind the part, inspect the junction with the fender edge, and compare reusable clips and hardware. For a no-force trial fit, review the distance between fastening points, check the interface with the lamp housing, and compare the original edge profile.

Before sourcing this front right headlight mounting bracket, check the interface with the lamp housing, review nearby cover openings, and compare mounting-hole height. While checking adjacent body parts, inspect the overall frame width, review the outer-edge shape, and confirm decorative surface details.

Application-Specific Identification

For side-specific inventory control with 71140-SWA-000 on the CR-V 2007: match the outer profile around the headlamp. The HD02009-074 sample for the right side should check the transition to the bumper or grille. Before installation, check that no locator is trapped behind the bumper; for a quotation, check sample approval before mass shipment.

Before workshop installation with 71140-SWA-000 on the CR-V 2007: confirm the destination-market version. The HD02009-074 sample for the right side should inspect the junction with the fender edge. Before installation, protect exposed edges during removal; for a quotation, agree the acceptable delivery window.

A trim-level comparison requires with 71140-SWA-000 on the CR-V 2007: match the body style and equipment grade. The HD02009-074 sample for the right side should compare surrounding grille openings. Before installation, keep the removed part nearby for comparison; for a quotation, state estimated annual purchasing volume.

Installation Guidance

During left-versus-right inventory selection, verify that the headlamp remains centred, reconfirm the OE reference after the trial fit, and keep the removed part nearby for comparison. During receiving inspection, complete a visual check under even lighting, ensure that all removed hardware is accounted for, and inspect each screw or clip point.

For replacement in the right front headlamp area, check that no locator is trapped behind the bumper, check lamp-to-trim clearance, and verify that no fastener is cross-threaded. When organizing mixed-OE inventory, check the final perimeter around the lamp, clean the lamp and bumper mounting area, and verify that the headlamp remains centred.

When separating nearby CR-V variants, check the finish for tool marks before delivery, trial-fit the component without force, and keep the removed part nearby for comparison. While reviewing the supplied photographs, confirm an evenly seated fit, compare the installed height with the opposite side, and inspect the lamp aim after surrounding parts are refitted.

Product Technical Specifications

Wholesale Supply and Packing

During an OE-led review for HD02009-074, confirm the nominated freight forwarder, compare the supplied product photographs, and confirm pallet requirements for larger quantities. During the physical comparison, state the target vehicle application, confirm the preferred incoterm, and inspect the carton at receiving.

For wholesale selection of 71140-SWA-000, provide the destination country, confirm the required finish, and support long trim sections during transit. When checking the headlamp opening, confirm sample-order requirements, confirm whether clips are required separately, and state estimated annual purchasing volume.

During left-versus-right inventory selection, support long trim sections during transit, confirm the requested delivery schedule, and confirm pallet requirements for larger quantities. Before the carton is sealed, request supported export-carton packing, confirm the packing method, and list every OE reference on the purchase order.

Frequently Asked Questions

Why must left and right versions of 71140-SWA-000 be distinguished?

Headlight-area accessories are usually side-specific. Their curves, holes and locator positions should not be assumed interchangeable. For CR-V, check nearby body-panel interfaces; compare the centre alignment point; replace distorted clips before final assembly; and list every OE reference on the purchase order before fitting or quotation.

How should 71140-SWA-000 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For CR-V, check whether the original part is mirrored; compare mounting-hole height; use hand pressure only during the initial engagement; and confirm the preferred incoterm before fitting or quotation.

Does the finish specification matter for 71140-SWA-000?

Yes. Different vehicle grades can change colour, coating, visible texture and locating details, so compare the original part carefully. For CR-V, compare the complete OE marking with the removed part; inspect the visible face for transport scuffing; photograph the completed installation for order records; and ask for carton dimensions before freight booking before fitting or quotation.

Does 71140-SWA-000 include a complete headlamp assembly?

No. This page covers the pictured front right headlight mounting bracket. Lamps, bulbs, wiring, modules and separate fasteners are not included unless visibly shown in the product photographs. For CR-V, check the relationship with the lamp housing; compare reusable clips and hardware; trial-fit the component without force; and state whether left and right pairs should be bundled before fitting or quotation.

Are clips and screws supplied with 71140-SWA-000?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For CR-V, confirm the decorative finish or painted surface; compare the profile below the lamp lens; confirm that every locator engages; and provide the consignee contact information before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-SWA-000, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.