71140-SNA-A00 Front Right Headlight Mounting Bracket for HONDA Civic 2006

71140-SNA-A00 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-SNA-A00 is a front right headlight mounting bracket intended for HONDA Civic 2006. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Civic

For the listed 2006 application, match the accessory to the original bumper revision, match the outer profile around the headlamp, and compare the stamped or moulded reference. Before the carton is sealed, check the relationship with the lamp housing, compare the headlight outline at both ends, and verify the left or right mounting side.

Before the original trim or bracket is discarded, review regional specification differences, review headlamp shape changes between production phases, and match the locator-slot arrangement. Before clips or hardware are transferred, confirm the front installation position, compare the complete OE marking with the removed part, and verify the trim package named in the application.

For HONDA Civic 2006, review facelift and pre-facelift styling, match the locator-slot arrangement, and compare the stamped or moulded reference. At the alignment stage, confirm the exact model year before placing the order, confirm the front installation position, and check nearby body-panel interfaces.

Headlight Mounting Bracket Design and Replacement Notes

For a body-shop order covering HONDA, inspect both end geometries, review the thickness around each mounting boss, and compare reusable clips and hardware. Before packing the confirmed item, inspect the moulded front face and rear ribs, review the outer-edge shape, and check the transition to the bumper or grille.

When comparing 71140-SNA-A00 with the removed component, check the adjoining panel gap, inspect the back-side support structure, and compare mounting-hole height. For an application-specific order, confirm decorative surface details, inspect moulded corners before installation, and inspect the junction with the fender edge.

For the listed 2006 application, compare mounting-hole height, inspect the visible face for transport scuffing, and compare reusable clips and hardware. During receiving inspection, compare the profile below the lamp lens, check the transition to the bumper or grille, and confirm decorative surface details.

Application-Specific Identification

A vehicle-side comparison starts with 71140-SNA-A00 on the Civic 2006: compare every locating point and screw opening. The HD02009-030 sample for the right side should compare the original edge profile. Before installation, confirm an evenly seated fit; for a quotation, request a packing-list breakdown by item code.

A trim-level comparison requires with 71140-SNA-A00 on the Civic 2006: verify that the grille design matches the stated application. The HD02009-030 sample for the right side should check the transition to the bumper or grille. Before installation, reconfirm the OE reference after the trial fit; for a quotation, separate painted and unpainted variants.

For side-specific inventory control with 71140-SNA-A00 on the Civic 2006: match the accessory to the original bumper revision. The HD02009-030 sample for the right side should confirm decorative surface details. Before installation, complete a visual check under even lighting; for a quotation, retain the product and carton labels.

Installation Guidance

Before sourcing this front right headlight mounting bracket, avoid bending narrow moulded tabs, keep the removed part nearby for comparison, and check lamp-to-trim clearance. At the workshop preparation stage, inspect each screw or clip point, confirm the correct fitting direction, and protect exposed edges during removal.

Before confirming this headlight accessory, review whether separate hardware is needed, compare the installed height with the opposite side, and check the finish for tool marks before delivery. For a repeat wholesale purchase, inspect broken vehicle-side mounts, protect exposed edges during removal, and complete a visual check under even lighting.

For a body-shop order covering HONDA, verify that the headlamp remains centred, trial-fit the component without force, and tighten hardware only after alignment. During the physical comparison, align the headlamp edge before fastening, complete a visual check under even lighting, and inspect broken vehicle-side mounts.

Product Technical Specifications

Wholesale Supply and Packing

When separating nearby Civic variants, check the ordered mounting side, separate left and right items in the packing list, and ask for carton dimensions before freight booking. At the alignment stage, confirm the nominated freight forwarder, send photographs of the removed component, and retain the product and carton labels.

When reviewing the visible finish on HD02009-030, request protective inner wrapping, check sample approval before mass shipment, and compare the supplied product photographs. For a no-force trial fit, list every OE reference on the purchase order, support long trim sections during transit, and specify whether the order is for service stock or a project.

Before sourcing this front right headlight mounting bracket, provide the consignee contact information, state whether left and right pairs should be bundled, and ask for carton dimensions before freight booking. While checking adjacent body parts, confirm the preferred incoterm, list every OE reference on the purchase order, and request moisture protection for sea freight.

Frequently Asked Questions

Can 71140-SNA-A00 fit every Civic model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For Civic, retain the original component for a direct comparison; review the outer-edge shape; inspect the lamp aim after surrounding parts are refitted; and request moisture protection for sea freight before fitting or quotation.

Is workshop installation recommended for 71140-SNA-A00?

Yes. A body or lighting workshop can inspect damaged mounts on the Civic, align adjoining panels and avoid forcing a part intended for another version. For Civic, check the lamp manufacturer where multiple units were fitted; compare the visible texture and finish; confirm that every locator engages; and provide the destination country before fitting or quotation.

Why must left and right versions of 71140-SNA-A00 be distinguished?

Headlight-area accessories are usually side-specific. Their curves, holes and locator positions should not be assumed interchangeable. For Civic, compare the headlight outline at both ends; compare gloss level with the neighbouring trim; tighten hardware only after alignment; and state the target vehicle application before fitting or quotation.

How should 71140-SNA-A00 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For Civic, review the orientation of the moulded bracket; compare mounting-hole height; ensure that all removed hardware is accounted for; and request protective inner wrapping before fitting or quotation.

Does the finish specification matter for 71140-SNA-A00?

Yes. Different vehicle grades can change colour, coating, visible texture and locating details, so compare the original part carefully. For Civic, compare every locating point and screw opening; review fastening slots and clip seats; confirm the correct fitting direction; and list every OE reference on the purchase order before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-SNA-A00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.