71108-T5R-A10 Front Left Fog Light Bezel for HONDA Fit 2015

71108-T5R-A10 Front Left Fog Light Bezel Product Overview

This listing covers 71108-T5R-A10, a front left fog light bezel associated with HONDA Fit 2015. Check the left orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for Fit

For replacement in the left front area, review facelift styling, compare the original grille section, and check adjacent bumper parts. Before clips or hardware are transferred, confirm the vehicle market, confirm the model year, and verify the mounting side.

When separating nearby Fit variants, check adjacent bumper parts, confirm the bumper position, and confirm the model year. During the physical comparison, confirm the surface finish, check the nearby lamp opening, and compare the full OE marking.

When comparing 71108-T5R-A10 with the removed bezel, confirm the model year, match the stated trim level, and review market-version differences. When checking the bumper opening, verify the mounting side, inspect the removed bezel, and compare every fixing tab.

Front Left Fog Light Bezel Design and Replacement Notes

For wholesale selection of 71108-T5R-A10, measure the original length, inspect the moulded face, and inspect reinforcement ribs. For a no-force trial fit, inspect the frame width, inspect the end geometry, and inspect the back-side structure.

Before sourcing this front left fog light bezel, review the outer-edge shape, review nearby cover openings, and measure the original length. While checking adjacent body parts, review narrow bezel ends, check the bumper transition, and compare the centre alignment.

Before confirming this fog light bezel, check the bezel curvature, review fastening slots, and inspect reinforcement ribs. Before clips or hardware are transferred, compare transferred hardware, check the lamp interface, and inspect the frame width.

Application-Specific Identification Notes

When the bumper opening is reviewed with 71108-T5R-A10 on the Fit 2015: check adjacent bumper parts. The HD02008-097 sample for the left side should measure the original length. For HONDA identification, 71108-T5R-A10 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-097 should request supported carton packing for the HONDA Fit 2015 order.

For application-specific sourcing with 71108-T5R-A10 on the Fit 2015: check the nearby lamp opening. The HD02008-097 sample for the left side should check the adjoining gap. For HONDA identification, 71108-T5R-A10 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-097 should retain the product label for the HONDA Fit 2015 order.

Before a replacement is packed with 71108-T5R-A10 on the Fit 2015: review the bezel orientation. The HD02008-097 sample for the left side should check the bezel curvature. For HONDA identification, 71108-T5R-A10 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-097 should request supported carton packing for the HONDA Fit 2015 order.

A vehicle-side comparison starts with 71108-T5R-A10 on the Fit 2015: review the bezel orientation. The HD02008-097 sample for the left side should check the adjoining gap. For HONDA identification, 71108-T5R-A10 also requires technicians to review separate hardware needs. A buyer quoting HD02008-097 should check the ordered mounting side for the HONDA Fit 2015 order.

Installation Guidance

For replacement in the left front area, support the bumper cover evenly, review the completed alignment, and confirm the fitting direction. Before the quotation is confirmed, confirm every locator engages, trial-fit the bezel without force, and confirm the finished bumper gap.

When separating nearby Fit variants, check adjacent panel gaps, confirm every locator engages, and avoid bending moulded tabs. Before packing the confirmed item, retain the removed bezel for comparison, check lamp-to-bezel clearance, and inspect each screw point.

When comparing 71108-T5R-A10 with the removed bezel, confirm the fitting direction, clean the bumper mounting area, and avoid bending moulded tabs. For a no-force trial fit, review the completed alignment, inspect damaged mounting points, and protect exposed panel edges.

Product Technical Specifications

Wholesale Supply and Packing

For wholesale selection of 71108-T5R-A10, state the target vehicle, confirm sample requirements, and retain the product label. Before final installation, inspect receiving condition, support the bezel during transit, and protect projecting locator tabs.

Before sourcing this front left fog light bezel, request export quotation terms, send photographs of the removed part, and retain the product label. During receiving inspection, state annual purchasing volume, provide the delivery country, and inspect receiving condition.

Before confirming this fog light bezel, provide the delivery country, confirm the packing method, and confirm separate clip requirements. Before the quotation is confirmed, inspect receiving condition, include the complete OE reference, and confirm the delivery schedule.

Frequently Asked Questions

Is workshop installation recommended for 71108-T5R-A10?

Yes. A workshop can inspect damaged bumper mounts on the Fit, align the lamp opening and avoid forcing a bezel intended for another trim level. For Fit, confirm the surface finish, inspect the moulded face, review the completed alignment, and compare the supplied photographs before installation or quotation.

Are mounting clips supplied with 71108-T5R-A10?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Fit, review the bezel orientation, inspect reinforcement ribs, inspect damaged mounting points, and provide the delivery country before installation or quotation.

Does 71108-T5R-A10 include the complete lamp assembly?

No. This listing covers the pictured front left fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Fit, compare the original grille section, inspect the frame width, protect exposed panel edges, and confirm sample requirements before installation or quotation.

How should 71108-T5R-A10 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Fit, check the vehicle build date, inspect the end geometry, support the bumper cover evenly, and state the destination port before installation or quotation.

What vehicle application is listed for 71108-T5R-A10?

71108-T5R-A10 is presented for HONDA Fit 2015. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Fit, match the outer contour, inspect the back-side structure, retain the removed bezel for comparison, and protect projecting locator tabs before installation or quotation.

Request a Quote

Send the complete OE reference 71108-T5R-A10, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.