71107-TB2-H01 Front Right Fog Light Bezel for HONDA Everus G12 2013

71107-TB2-H01 Front Right Fog Light Bezel Product Overview

The product shown under 71107-TB2-H01 is a front right fog light bezel intended for HONDA Everus G12 2013. Check the right orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for Everus G12

For HONDA Everus G12 2013, confirm the bumper position, check the nearby lamp opening, and compare every fixing tab. Before packing the confirmed item, inspect the removed bezel, verify the mounting side, and review market-version differences.

When preparing a Everus G12 bumper repair, confirm the surface finish, compare the installation direction, and compare the full OE marking. For a no-force trial fit, review market-version differences, compare every fixing tab, and review facelift styling.

During comparison with the original lamp surround, compare the full OE marking, review the bezel orientation, and compare every fixing tab. While checking adjacent body parts, inspect the lamp aperture size, compare the original grille section, and inspect the removed bezel.

Front Right Fog Light Bezel Design and Replacement Notes

For the listed 2013 application, inspect the back-side structure, check the lamp interface, and review nearby cover openings. During receiving inspection, compare mounting-hole height, inspect the frame width, and review the outer-edge shape.

Before the removed bezel is discarded, confirm decorative finish details, check the bumper transition, and review nearby cover openings. Before the quotation is confirmed, check the bezel curvature, compare transferred hardware, and compare vent or grille openings.

During an OE-led review for HD02008-092, compare the centre alignment, compare the original edge profile, and confirm decorative finish details. Before packing the confirmed item, compare mounting-hole height, inspect the back-side structure, and check the adjoining gap.

Application-Specific Identification Notes

OE selection begins with 71107-TB2-H01 on the Everus G12 2013: review market-version differences. The HD02008-092 sample for the right side should measure the original length. For HONDA identification, 71107-TB2-H01 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-092 should request supported carton packing for the HONDA Everus G12 2013 order.

For application-specific sourcing with 71107-TB2-H01 on the Everus G12 2013: check the vehicle build date. The HD02008-092 sample for the right side should check the adjoining gap. For HONDA identification, 71107-TB2-H01 also requires technicians to avoid bending moulded tabs. A buyer quoting HD02008-092 should retain the product label for the HONDA Everus G12 2013 order.

For an export quotation with 71107-TB2-H01 on the Everus G12 2013: review the bezel orientation. The HD02008-092 sample for the right side should check the bezel curvature. For HONDA identification, 71107-TB2-H01 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-092 should request supported carton packing for the HONDA Everus G12 2013 order.

A vehicle-side comparison starts with 71107-TB2-H01 on the Everus G12 2013: review facelift styling. The HD02008-092 sample for the right side should check the adjoining gap. For HONDA identification, 71107-TB2-H01 also requires technicians to review separate hardware needs. A buyer quoting HD02008-092 should check the ordered mounting side for the HONDA Everus G12 2013 order.

Installation Guidance

For HONDA Everus G12 2013, protect nearby painted surfaces, avoid bending moulded tabs, and check the final perimeter. While reviewing the supplied photographs, support the bumper cover evenly, confirm every locator engages, and review separate hardware needs.

When preparing a Everus G12 bumper repair, confirm every locator engages, trial-fit the bezel without force, and confirm the finished bumper gap. Before final installation, review separate hardware needs, retain the removed bezel for comparison, and inspect damaged mounting points.

During comparison with the original lamp surround, protect exposed panel edges, review separate hardware needs, and check the final perimeter. During receiving inspection, confirm an evenly seated fit, review the completed alignment, and inspect the surrounding guides.

Product Technical Specifications

Wholesale Supply and Packing

For the listed 2013 application, review carton edge protection, include the complete OE reference, and state annual purchasing volume. At the workshop preparation stage, support the bezel during transit, confirm the delivery schedule, and state the target vehicle.

Before the removed bezel is discarded, confirm the packing method, request export quotation terms, and state annual purchasing volume. For a repeat wholesale order, check the ordered mounting side, compare the supplied photographs, and confirm separate clip requirements.

During an OE-led review for HD02008-092, send photographs of the removed part, retain the product label, and state annual purchasing volume. While reviewing the supplied photographs, provide the delivery country, inspect receiving condition, and check the ordered mounting side.

Frequently Asked Questions

Does 71107-TB2-H01 include the complete lamp assembly?

No. This listing covers the pictured front right fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Everus G12, confirm the vehicle market, inspect the moulded face, review the completed alignment, and compare the supplied photographs before installation or quotation.

How should 71107-TB2-H01 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Everus G12, review the bezel orientation, inspect reinforcement ribs, inspect damaged mounting points, and provide the delivery country before installation or quotation.

What vehicle application is listed for 71107-TB2-H01?

71107-TB2-H01 is presented for HONDA Everus G12 2013. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Everus G12, confirm the bumper position, inspect the frame width, protect exposed panel edges, and confirm sample requirements before installation or quotation.

Can photographs alone confirm 71107-TB2-H01 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Everus G12, review market-version differences, inspect the end geometry, support the bumper cover evenly, and state the destination port before installation or quotation.

Does trim specification matter for 71107-TB2-H01?

Yes. high-specification can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For Everus G12, confirm the vehicle market, inspect the back-side structure, retain the removed bezel for comparison, and protect projecting locator tabs before installation or quotation.

Request a Quote

Send the complete OE reference 71107-TB2-H01, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.