53112-02450 Front Bumper Grille for TOYOTA Corolla 2014

53112-02450 Front Bumper Grille Product Overview

This page documents 53112-02450, a front bumper grille associated with 2014 TOYOTA Corolla (US-market version; standard-spec version). Rather than treating grille parts as universal, the listing keeps internal reference TY02004-044 and the stated application visible for technical review.

Corolla Bumper Grille Function and Position

Within the Corolla fascia, the front bumper grille is an application-moulded exterior piece. The selected part needs the same side, opening arrangement and tab layout as the removed front grille. The item is catalogued as US-market version; standard-spec version.

The source application is recorded as 14 款 卡罗拉 美版 前杠格栅(低配). This retained catalogue wording helps trace market, trim and body-style distinctions during buyer verification.

OE-Led Fitment Verification for 53112-02450

Use 53112-02450 as the first filter and vehicle production data as the second. A trim or facelift change can make TY02004-044 unsuitable even where 2014 TOYOTA Corolla (US-market version; standard-spec version) appears broadly similar.

Do not use a similar photograph as the only fitment test. Record the vehicle identification number, production date, body style, market and trim, then check the grille side and opening arrangement against the original component.

Workshop Handling and Installation Review

Before fitting TY02004-044, clean the front aperture and compare all retained hardware. On the Corolla, verify that each tab enters its intended slot and that no edge is held under permanent stress.

Confirm whether emblems, bezels, tow covers, clips or related mouldings transfer from the old assembly. The supply scope follows the pictured product; separate hardware should be stated on the enquiry.

Inspection, Packaging and Receiving Control

The 53112-02450 part benefits from a sample-based inspection plan: confirm identity, geometry and visible finish first, then monitor TY02004-044 lot packing so long edges are not flexed during transport.

For shipping, protect the visible face from rubbing and support projecting corners without compressing the mesh. Receiving inspection should take place before the part enters paint or installation work.

Product-Specific Approval Record for 53112-02450

The following review points belong to TY02004-044 and the stated 2014 TOYOTA Corolla (US-market version; standard-spec version) application. They keep workshop evidence, sample approval and receiving control attached to this exact grille reference.

• Receiving record 1 — TY02004-044 / Front: record the mesh orientation alongside the vehicle production label for Corolla item TY02004-044 under OE reference 53112-02450.
• Fitment file 2 — 2014 TOYOTA Corolla (US-market version; standard-spec version) / TY02004-044: mark lamp or trim interfaces on the buyer approval photograph for Corolla item TY02004-044 under OE reference 53112-02450.
• Geometry control 3 — 53112-02450 / TY02004-044: note surface texture under neutral lighting before installation for Corolla item TY02004-044 under OE reference 53112-02450.
• Sample decision 4 — Corolla / 53112-02450: link receiving photographs to the commercial order-line number for Corolla item TY02004-044 under OE reference 53112-02450.
• Order trace 5 — TY02004-044 / Front: record any market-specific openings shown on the original bumper for Corolla item TY02004-044 under OE reference 53112-02450.
• Vehicle evidence 6 — 2014 TOYOTA Corolla (US-market version; standard-spec version) / TY02004-044: match the grille outline to the stated body style and facelift for Corolla item TY02004-044 under OE reference 53112-02450.
• Catalogue proof 7 — 53112-02450 / TY02004-044: measure the outer frame before comparing the retained bumper aperture for Corolla item TY02004-044 under OE reference 53112-02450.
• Packing control 8 — Corolla / 53112-02450: check the centre section against the bumper cover reference points for Corolla item TY02004-044 under OE reference 53112-02450.
• Identity gate 9 — TY02004-044 / Front: confirm the lower edge follows the original underbody connection for Corolla item TY02004-044 under OE reference 53112-02450.
• Workshop checkpoint 10 — 2014 TOYOTA Corolla (US-market version; standard-spec version) / TY02004-044: verify left and right orientation from the vehicle-facing side for Corolla item TY02004-044 under OE reference 53112-02450.
• Receiving record 11 — 53112-02450 / TY02004-044: check transport support around projecting corners and narrow bridges for Corolla item TY02004-044 under OE reference 53112-02450.
• Fitment file 12 — Corolla / 53112-02450: confirm transferred covers or badges fit without altering the frame for Corolla item TY02004-044 under OE reference 53112-02450.
• Geometry control 13 — TY02004-044 / Front: keep the production-date evidence beside the approved OE lookup for Corolla item TY02004-044 under OE reference 53112-02450.
• Sample decision 14 — 2014 TOYOTA Corolla (US-market version; standard-spec version) / TY02004-044: photograph every locator before the damaged grille leaves the workshop for Corolla item TY02004-044 under OE reference 53112-02450.
• Order trace 15 — 53112-02450 / TY02004-044: inspect side returns for the same depth and fastening direction for Corolla item TY02004-044 under OE reference 53112-02450.

Application Evidence Narrative for TY02004-044

The subject is a front bumper grille catalogued as 53112-02450 for 2014 TOYOTA Corolla (US-market version; standard-spec version). Supplier code TY02004-044 supports traceable enquiries, sample approval and repeat-order documentation.

Positioned at the front of the Corolla, the grille is shaped around application-specific bumper geometry. The part may meet lamp bezels, tow-hook covers or trim strips depending on specification. The stated item is the US-market version; standard-spec version.

2014 TOYOTA Corolla (US-market version; standard-spec version) buyers can begin identification with 53112-02450. This front bumper grille is registered under TY02004-044 and described with the application limits needed by parts specialists and body shops.

Positioned at the front of the Corolla, the grille is shaped around application-specific bumper geometry. The part may meet lamp bezels, tow-hook covers or trim strips depending on specification. The stated item is the US-market version; standard-spec version.

53112-02450 identifies this front bumper grille for 2014 TOYOTA Corolla (US-market version; standard-spec version). The record links OE-led search intent with supplier code TY02004-044, a precise vehicle reference and the photographs saved with the source item.

A correct front bumper grille helps return the Corolla bumper to its designed appearance and ventilation arrangement. It is not described as the complete bumper cover, reinforcement or energy absorber. The product row notes the US-market version; standard-spec version.

The identity chain for TY02004-044 is TOYOTA Corolla, 2014, front bumper position and OE 53112-02450. Keep TY02004-044 beside Corolla vehicle evidence, keep 53112-02450 beside the removed grille marking, and keep the front location beside the approval photographs.

53112-02450 Front Bumper Grille for TOYOTA Corolla 2014 is the controlled search entity for this page. In a buyer file, 53112-02450 should lead the Corolla comparison, TY02004-044 should lead the supplier trace, and 2014 TOYOTA Corolla (US-market version; standard-spec version) should lead the vehicle-side confirmation before shipment.

Product Technical Specifications

Wholesale Procurement for TY02004-044

Procurement approval works best when 53112-02450, TY02004-044 and 2014 TOYOTA Corolla (US-market version; standard-spec version) remain together from enquiry through receiving. Note destination and inspection expectations before the commercial offer is finalised.

For repeat programmes, keep TY02004-044, the approved sample, fitment photos and packaging standard under one revision-controlled record.

Frequently Asked Questions

What vehicle information helps verify TY02004-044?

Provide the VIN, production date, market, trim, body style and photos of the removed part. The recorded application is 2014 TOYOTA Corolla (US-market version; standard-spec version).

What does 53112-02450 identify?

53112-02450 is the primary reference recorded for this front bumper grille and 2014 TOYOTA Corolla (US-market version; standard-spec version). It should be checked against the original part and vehicle data.

How should fitment for 53112-02450 be approved?

Confirm 2014 TOYOTA Corolla (US-market version; standard-spec version), VIN or build date, original OE marking, bumper opening and tab layout. Keep internal code TY02004-044 on the review record.

What should be included in a wholesale enquiry for 53112-02450?

Send 53112-02450, item TY02004-044, vehicle details, quantity, destination and any sample, packaging, label or inspection requirements.

Should installers compare the original Corolla grille with TY02004-044?

Yes. Review edge profile, mesh design, fastening points, openings and neighbouring trim before forcing any clips into place.

Request a Product and Fitment Review

Send the complete OE reference 53112-02450, item code TY02004-044, vehicle details, quantity and destination. The team can review the supplied evidence before preparing a product-specific export quotation.