4L0 807 733B 1RR Front Bumper Air Deflector for AUDI Q7 2010
Product: Front Bumper Air Deflector
Primary OE: 4L0 807 733B 1RR
Item code: AD02003-106
Cross-reference numbers:
4L0 807 733B 1RR
4L0807733B1RR
Brand: AUDI
Model: Q7
Application reference: 2010 AUDI Q7
Position: Front
Verification: Check VIN, model year, body contour and every functional opening before paint or permanent modification.
Supply note: Reference AD02003-106 when discussing carton protection, labels, pallet rules and transport method.
4L0 807 733B 1RR serves as a structured sourcing record for workshops, resellers and fleet repair operations. For 2010 AUDI Q7, Yongshang Auto tracks the requested front bumper air deflector as AD02003-106.
AD02003-106 requires an application-specific review: The visible profile, mounting edges and equipment apertures must be compared with the removed bumper-aero part before refinishing begins. The completed check supports a traceable discussion between buyer and supplier.
Panel Geometry Confirmation
Fitment guidance for 4L0 807 733B 1RR. Verify whether the request is for the upper cover, lower cover or complete outer bumper-aero component. The purchase description should match the physical section needed by the repair. The buyer can then connect the physical review to the supplier item record.
The front location on 2010 AUDI Q7 should be reviewed as follows: Review the mounting system as a complete assembly. Correct selection depends on the relationship between the bumper-aero component, retainers, reinforcement, absorber and surrounding trim. The same information helps receiving staff identify the correct carton and panel.
Product Technical Specifications
| Product type | Front Bumper Air Deflector |
|---|---|
| Primary OE reference | 4L0 807 733B 1RR |
| Cross-reference numbers | 4L0 807 733B 1RR |
| Internal item code | AD02003-106 |
| Vehicle brand | AUDI |
| Vehicle model | Q7 |
| Model year | 2010 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2010 AUDI Q7 |
Repair-Market Use of the bumper-aero component
Functional context for 4L0 807 733B 1RR. The component is a finish-critical exterior item, so packing, storage and workshop handling can influence the result as much as catalogue selection. This approach reduces dependence on exterior appearance alone.
Application note for item AD02003-106. This service part is commonly used in collision repair, refurbishment and wholesale replacement programmes. Its suitability still depends on the specific vehicle and equipment configuration. This evidence belongs in the same approval file as the vehicle photographs.
Body-Shop Preparation Notes
Receiving note for carton AD02003-106. Separate cosmetic surface preparation from fitment approval. Fit, aperture layout and mounting geometry should be accepted first. This approach reduces dependence on exterior appearance alone.
Pre-finish check for 2010 AUDI Q7. Review edge thickness and moulding channels where accessories will be transferred. The workshop should confirm those interfaces before committing labour to the finish. The repairer should document the outcome before transferring trim components.
From Sample Confirmation to Bulk Order
A quotation for 4L0 807 733B 1RR should reflect this guidance: State the acceptable inspection method for surface condition, tabs, openings and general contour. Commercial approval should distinguish cosmetic review from vehicle fitment confirmation. The purchase team can use the recorded result when confirming the order line.
The 3 square images attached to AD02003-106 support visual review. Add consignee restrictions, carton-size limits and pallet rules to the initial request. Late packaging changes can affect both cost and achievable container utilisation. This review is especially useful near model-year or equipment transitions.
Frequently Asked Questions
Which records should accompany an enquiry for OE 4L0 807 733B 1RR?
2010 AUDI Q7 is the stated reference for this page. Photograph the surrounding grille, lamps and adjacent body panels as well as the removed bumper-aero part. These interfaces help distinguish similar designs. This review is especially useful near model-year or equipment transitions.
Why should the enquiry retain both AD02003-106 and 4L0 807 733B 1RR?
Supplier-code context for this front bumper air deflector. Ask for pre-shipment photographs when the purchase programme requires packaging approval. The record should show item labels, carton condition and loading arrangement. Keep AD02003-106 beside 4L0 807 733B 1RR in the final commercial record.
What attachment points deserve attention during a dry fit?
Panel-comparison guidance for 2010 AUDI Q7. Check the OE reference first and use physical evidence second. Do not approve from an online image or exterior colour alone. The same information helps receiving staff identify the correct carton and panel.
What condition should be met before permanent modification?
Finishing guidance for OE 4L0 807 733B 1RR. Release the bumper-aero component to paint only when the fitment record shows that OE data and physical comparison support the same application. This approach reduces dependence on exterior appearance alone.
What information should accompany a commercial request for AD02003-106?
Wholesale request for AD02003-106. State the required inspection record, sample-approval process and transport method. Large exterior panels need early agreement on protection and volume. The same information helps receiving staff identify the correct carton and panel.
Request a Quote for 4L0 807 733B 1RR
Add consignee restrictions, carton-size limits and pallet rules to the initial request. Late packaging changes can affect both cost and achievable container utilisation. For Yongshang Auto’s review, connect 4L0 807 733B 1RR and AD02003-106 with the intended 2010 AUDI Q7, requested quantity and delivery market.
