4K0955102 Front Right Headlight Washer Nozzle for AUDI A6 2019
Primary OE reference: 4K0955102
Cross-reference number 1: 4K0 955 102
Cross-reference number 2: 4K0955102
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI A6 2019
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A6
Model year: 2019
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-044
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4K0955102 Front Right Headlight Washer Nozzle Product Overview
The component shown under 4K0955102 is a front right headlight washer nozzle intended for AUDI A6 2019. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4K0955102 should be confirmed against AUDI A6 2019 and the right installation side. The review should review body-style differences within the same model generation, compare the actuator orientation behind the bumper cover, and match the exact model year and bumper revision. Use the removed part and product photographs to confirm that the listed model designation matches the vehicle, check the production date where model-year transitions overlap, and separate mirrored left and right items during inventory selection; finally, compare the nozzle travel direction with the vehicle-side installation and confirm the destination-market equipment specification.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-044 should be checked separately. For this headlight washer nozzle, inspect the telescopic body for smooth movement, compare the outer surface profile with the bumper opening, and review the clip geometry on the rear face. A direct comparison with the removed part should additionally check the nozzle outlet orientation, inspect the base bracket around every locating slot, and compare the cap-to-support engagement method. Before the item is accepted, review the spring-loaded return features where fitted and check the fluid inlet for storage contamination.
OE Identification and Side Confirmation
4K0955102 is the primary OE identity for this right front right headlight washer nozzle, while AD02010-044 is the internal item code. Match both references to the vehicle record, then compare product photographs with the removed part from several angles. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-044 begins before the bumper area is disturbed: confirm sufficient clearance behind the bumper and reconnect every hose clip before filling the system. During trial fitting, photograph the original routing before disassembly, reconfirm the OE number before discarding the packaging, and trial-fit the component before final fastening. Before returning the vehicle to service, test the spray direction before returning the vehicle, verify that the cap remains attached through a full washer cycle, and inspect nearby wiring and sensors before refitting trim.
Receiving Inspection
When AD02010-044 arrives, receiving staff should review the hose spigot for impact damage or distortion, retain the OE label until the washer system has passed its function test, and verify the nozzle head returns smoothly without applying excess force. Before workshop release, confirm that loose accessories are identified on the packing list, check the actuator body for straightness before trial installation, inspect the visible cover face for scratches or pressure marks, and inspect mounting holes for flash, blockage or edge damage. Complete the inspection by ensuring that staff confirm the internal item code before mixed stock is shelved, verify the cover contour against the approved product photograph, and check the cap hinge or retaining point for free movement.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 4K0955102 |
| Cross-reference numbers | 4K0 955 102 4K0955102 |
| Internal item code | AD02010-044 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2019 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A6 2019 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4K0955102, please state any outer-carton marking requirements, include the full OE reference on the purchase order, and request export-carton dimensions before freight booking. Packing instructions should request moisture protection for sea freight, request replacement-part documentation when required, and confirm whether the visible cover needs a primed or finished surface. Before dispatch, confirm whether caps and nozzles should be supplied as pairs and state the requested delivery schedule.
Frequently Asked Questions
Which side uses 4K0955102?
This front right headlight washer nozzle is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For item AD02010-044, the approval should check the cap hinge or retaining point. The same item record should also check the fluid inlet for storage contamination.
Can 4K0955102 fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. On the listed AUDI A6 2019, technicians should check whether the bumper is standard or sport specification. A workshop comparison should additionally compare every tab, clip seat and locating shoulder.
Is a sample order available for 4K0955102?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For the right-side order line, request moisture protection for sea freight. The order review should further use dividers to prevent caps from rubbing each other.
What should be inspected when 4K0955102 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. The product-specific check for 4K0955102 should check molded tabs for whitening, cracks or transport stress. Receiving staff should also measure the main mounting span when two bumper versions appear similar.
Does the finish specification matter for 4K0955102?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle is accepted, compare the outer surface profile with the bumper opening. Before approval, the buyer or technician should check the joint between the visible cap and hidden support.
