4G8955102 Front Right Headlight Washer Nozzle for AUDI A7 2014
Primary OE reference: 4G8955102
Cross-reference number 1: 4G8 955 102
Cross-reference number 2: 4G8955102
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI A7 2014
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A7
Model year: 2014
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-066
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4G8955102 Front Right Headlight Washer Nozzle Product Overview
The component shown under 4G8955102 is a front right headlight washer nozzle intended for AUDI A7 2014. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A7
Compatibility for 4G8955102 should be confirmed against AUDI A7 2014 and the right installation side. The review should confirm that the listed model designation matches the vehicle, verify that the OE reference is not for the opposite side, and confirm the destination-market equipment specification. Use the removed part and product photographs to compare the complete OE marking with the removed washer component, check whether the original cover is supplied separately from its support, and review painted, primed and unpainted finish requirements; finally, compare the hose connection or cover hinge with the original part and match the exact model year and bumper revision.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-066 should be checked separately. For this headlight washer nozzle, check each molded locator against the original component, review the bracket stiffness and screw seats, and compare the retracted position with the bumper surface. A direct comparison with the removed part should additionally inspect the molded tabs for cracks or distortion, check the cap hinge or retaining point, and review the clip geometry on the rear face. Before the item is accepted, compare the cap-to-support engagement method and inspect narrow plastic tips before installation.
OE Identification and Side Confirmation
4G8955102 is the primary OE identity for this right front right headlight washer nozzle, while AD02010-066 is the internal item code. Match both references to the vehicle record, then verify nearby parking-sensor or trim interfaces. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-066 begins before the bumper area is disturbed: inspect the bumper opening after the trial fit and disconnect the fluid hose without twisting the plastic spigot. During trial fitting, test the spray direction before returning the vehicle, follow the vehicle workshop procedure for bumper removal, and reconnect every hose clip before filling the system. Before returning the vehicle to service, confirm that no hose is pinched behind the bumper, transfer reusable clips only after checking their condition, and avoid forcing a mirrored part into the bumper opening.
Receiving Inspection
When AD02010-066 arrives, receiving staff should confirm the bumper-facing edge has not been compressed in transit, compare the supplied side with the vehicle repair order, and confirm the bumper-facing edge has not been compressed in transit. Before workshop release, compare the supplied side with the vehicle repair order, confirm the bumper-facing edge has not been compressed in transit, compare the supplied side with the vehicle repair order, and confirm the bumper-facing edge has not been compressed in transit. Complete the inspection by ensuring that staff compare the supplied side with the vehicle repair order, confirm the bumper-facing edge has not been compressed in transit, and compare the supplied side with the vehicle repair order.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 4G8955102 |
| Cross-reference numbers | 4G8 955 102 4G8955102 |
| Internal item code | AD02010-066 |
| Vehicle brand | AUDI |
| Vehicle model | A7 |
| Model year | 2014 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A7 2014 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4G8955102, please confirm whether the visible cover needs a primed or finished surface, request barcode or private-label details when needed, and confirm sample approval before mass shipment. Packing instructions should identify the required installation side, identify project stock and service stock separately, and request a packing-list breakdown by internal item code. Before dispatch, include the full OE reference on the purchase order and confirm whether caps and nozzles should be supplied as pairs.
Frequently Asked Questions
How should 4G8955102 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For item AD02010-066, the approval should compare the actuator orientation behind the bumper cover. The same item record should also confirm the destination-market equipment specification.
Should the washer system be tested after fitting 4G8955102?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. On the listed AUDI A7 2014, technicians should check the system for leaks after reconnection. A workshop comparison should additionally route the washer hose away from sharp edges.
Is 4G8955102 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For the right-side order line, separate left and right items on the packing list. The order review should further use dividers to prevent caps from rubbing each other.
Can product photographs alone confirm 4G8955102 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. The product-specific check for 4G8955102 should compare the nozzle travel direction with the vehicle-side installation. Receiving staff should also use the full OE number, not a partial family reference.
Which side uses 4G8955102?
This front right headlight washer nozzle is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. Before this headlight washer nozzle is accepted, compare the cap perimeter and corner radii. Before approval, the buyer or technician should check the joint between the visible cap and hidden support.
