4G0955275 Front Left Headlight Washer Nozzle Cover for AUDI A6 2012
Primary OE reference: 4G0955275
Cross-reference number 1: 4G0 955 275
Cross-reference number 2: 4G0955275
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A6 2012
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A6
Model year: 2012
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-053
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4G0955275 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4G0955275 is a front left headlight washer nozzle cover intended for AUDI A6 2012. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4G0955275 should be confirmed against AUDI A6 2012 and the left installation side. The review should match the connector and fluid inlet position where applicable, verify the required left or right installation side, and review painted, primed and unpainted finish requirements. Use the removed part and product photographs to separate mirrored left and right items during inventory selection, confirm whether a cap, nozzle, bracket or complete assembly is required, and compare product photographs with the removed part from several angles; finally, match the mounting pattern around the bumper aperture and confirm that the listed model designation matches the vehicle.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-053 should be checked separately. For this headlight washer nozzle cover, inspect the hose connector for ovality, check whether the visible part requires painting, and review the hose spigot angle on the washer nozzle. A direct comparison with the removed part should additionally compare the support flange width, inspect the base bracket around every locating slot, and check the joint between the visible cap and hidden support. Before the item is accepted, review the sealing area around the hose connection and compare the visible bumper-side contour.
OE Identification and Side Confirmation
4G0955275 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-053 is the internal item code. Match both references to the vehicle record, then check regional variations in headlamp-cleaning equipment. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-053 begins before the bumper area is disturbed: route the washer hose away from sharp edges and confirm that the nozzle extends and retracts freely. During trial fitting, check the system for leaks after reconnection, test the spray direction before returning the vehicle, and avoid forcing a mirrored part into the bumper opening. Before returning the vehicle to service, clean the hose and connector before assembly, replace distorted clips or damaged seals, and support the bumper cover while accessing the hidden actuator.
Receiving Inspection
When AD02010-053 arrives, receiving staff should measure the main mounting span when two bumper versions appear similar, inspect the visible cover face for scratches or pressure marks, and record carton damage before the item is moved to workshop stock. Before workshop release, check the cap hinge or retaining point for free movement, check the carton partition for evidence of part-to-part contact, confirm the nozzle outlet is clean and unobstructed, and verify the supplied scope before discarding dividers or inner bags. Complete the inspection by ensuring that staff compare the visible surface texture with the ordered specification, verify the nozzle head returns smoothly without applying excess force, and compare left and right orientation before removing protective wrapping.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4G0955275 |
| Cross-reference numbers | 4G0 955 275 4G0955275 |
| Internal item code | AD02010-053 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2012 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A6 2012 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4G0955275, please request barcode or private-label details when needed, request moisture protection for sea freight, and request a packing-list breakdown by internal item code. Packing instructions should confirm the acceptable delivery window, send photographs of the removed washer part, and separate left and right items on the packing list. Before dispatch, request export-carton dimensions before freight booking and check carton labels at receiving.
Frequently Asked Questions
Can 4G0955275 fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-053, the approval should verify the required left or right installation side. The same item record should also compare product photographs with the removed part from several angles.
Is workshop installation recommended for 4G0955275?
Yes. A qualified workshop can access the bumper area on the A6, transfer hoses or clips safely and test the washer system for correct operation and leaks. On the listed AUDI A6 2012, technicians should check the system for leaks after reconnection. A workshop comparison should additionally photograph the original routing before disassembly.
Should the washer system be tested after fitting 4G0955275?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For the left-side order line, inspect nearby wiring and sensors before refitting trim. The order review should further verify that the cover closes without rubbing the bumper.
How should 4G0955275 be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. The product-specific check for 4G0955275 should identify project stock and service stock separately. Receiving staff should also confirm sample approval before mass shipment.
Is 4G0955275 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. Before this headlight washer nozzle cover is accepted, request moisture protection for sea freight. Before approval, the buyer or technician should provide the complete destination address or port.
