4F0955275B Front Left Headlight Washer Nozzle Cover for AUDI A6 2009
Primary OE reference: 4F0955275B
Cross-reference number 1: 4F0 955 275B
Cross-reference number 2: 4F0955275B
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A6 2009
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A6
Model year: 2009
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-057
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4F0955275B Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4F0955275B is a front left headlight washer nozzle cover intended for AUDI A6 2009. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4F0955275B should be confirmed against AUDI A6 2009 and the left installation side. The review should compare the nozzle travel direction with the vehicle-side installation, verify nearby parking-sensor or trim interfaces, and match the connector and fluid inlet position where applicable. Use the removed part and product photographs to confirm that the listed model designation matches the vehicle, compare every tab, clip seat and locating shoulder, and check whether the original cover is supplied separately from its support; finally, review body-style differences within the same model generation and compare product photographs with the removed part from several angles.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-057 should be checked separately. For this headlight washer nozzle cover, inspect the actuator barrel for impact damage, compare the retracted position with the bumper surface, and review the hose spigot angle on the washer nozzle. A direct comparison with the removed part should additionally check the nozzle outlet orientation, inspect narrow plastic tips before installation, and compare the distance between mounting points. Before the item is accepted, review the engagement of the cover with the nozzle stem and check the joint between the visible cap and hidden support.
OE Identification and Side Confirmation
4F0955275B is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-057 is the internal item code. Match both references to the vehicle record, then compare the actuator orientation behind the bumper cover. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-057 begins before the bumper area is disturbed: work with the washer system depressurized and test the spray direction before returning the vehicle. During trial fitting, confirm sufficient clearance behind the bumper, check the headlamp lens receives an even spray, and disconnect the fluid hose without twisting the plastic spigot. Before returning the vehicle to service, clean the hose and connector before assembly, paint or finish visible covers before final installation when required, and inspect the bumper opening after the trial fit.
Receiving Inspection
When AD02010-057 arrives, receiving staff should verify that protective plugs remain in open fluid connections, compare left and right orientation before removing protective wrapping, and inspect projecting pins before placing the item on a hard bench. Before workshop release, confirm that loose accessories are identified on the packing list, check the carton partition for evidence of part-to-part contact, compare connector depth and hose angle with the retained original part, and compare the supplied side with the vehicle repair order. Complete the inspection by ensuring that staff retain the OE label until the washer system has passed its function test, check molded tabs for whitening, cracks or transport stress, and compare the visible surface texture with the ordered specification.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4F0955275B |
| Cross-reference numbers | 4F0 955 275B 4F0955275B |
| Internal item code | AD02010-057 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A6 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4F0955275B, please confirm sample requirements before a bulk order, state the requested delivery schedule, and send photographs of the removed washer part. Packing instructions should identify project stock and service stock separately, state any outer-carton marking requirements, and separate left and right items on the packing list. Before dispatch, provide the consignee and freight-forwarder details and protect each nozzle outlet from dust during transit.
Frequently Asked Questions
Is 4F0955275B a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For item AD02010-057, the approval should request moisture protection for sea freight. The same item record should also verify the packed quantity by OE reference.
What information should accompany a 4F0955275B enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. On the listed AUDI A6 2009, technicians should plug open fluid connections during packing. A workshop comparison should additionally request a packing-list breakdown by internal item code.
Which vehicle application is listed for 4F0955275B?
4F0955275B is listed for AUDI A6 2009. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For the left-side order line, compare the actuator orientation behind the bumper cover. The order review should further verify the required left or right installation side.
Can product photographs alone confirm 4F0955275B compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. The product-specific check for 4F0955275B should check whether the original cover is supplied separately from its support. Receiving staff should also compare the actuator orientation behind the bumper cover.
Is a sample order available for 4F0955275B?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. Before this headlight washer nozzle cover is accepted, confirm the acceptable delivery window. Before approval, the buyer or technician should confirm sample approval before mass shipment.
