04717-TZA-H50 Bumper Corner Trim for HONDA Fit 2021 Right
Primary OE reference: 04717-TZA-H50
Cross-reference number 1: 04717-TZA-H50
Cross-reference number 2: 04717TZAH50
Product: Bumper Corner Trim
Vehicle: HONDA Fit 2021 (GS1 body code)
Installation area: Rear
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-045
Fitment note: compare every attachment point; confirm the surface specification; compare the removed trim before ordering 04717-TZA-H50
Product comparison: compare visible edge height; inspect the locator direction; check the panel transition against the removed bumper corner trim
Installation note: clean the mounting channel; clean the mounting channel; clean the mounting channel on the Fit
Wholesale enquiry: include the complete OE number; confirm the delivery schedule; request protective inner packing for HD02005-045
Application guidance: For HONDA Fit 2021 (GS1 body code), compare 04717-TZA-H50 with the complete outline of the removed bumper corner trim. Also compare the complete OE number, compare gloss or plating, protect painted panel edges, and request protective inner packing.
04717-TZA-H50 Bumper Corner Trim Product Overview
A sourcing check for HONDA Fit 2021 (GS1 body code) can use 04717-TZA-H50 to locate this bumper corner trim. The page states HD02005-045, right orientation and the practical details needed for product comparison.
For HONDA Fit 2021 (GS1 body code), compare 04717-TZA-H50 with the complete outline of the removed bumper corner trim. Also compare the complete OE number, compare gloss or plating, protect painted panel edges, and request protective inner packing.
Fitment and Application for Fit
When preparing a Fit exterior repair, match the original clip spacing, confirm the production year, and inspect the original contour. Before final installation, review market-specific styling, review the end profiles, and compare the mounting direction.
During comparison with the original bumper trim, review facelift differences, match the bumper outline, and compare the mounting direction. During receiving inspection, inspect the original contour, compare the removed trim, and compare the complete OE number.
For a replacement on the right rear area, review market-specific styling, check the vehicle build date, and review the end profiles. Before the quotation is confirmed, check adjacent garnish pieces, compare the mounting direction, and compare the complete OE number.
Bumper Corner Trim Design and Replacement Notes
Before the removed component is discarded, compare visible edge height, check the moulding curvature, and compare gloss or plating. For a repeat wholesale order, check the bumper interface, compare the original edge profile, and check the panel transition.
During an OE-led check for HD02005-045, check the moulding curvature, review the centre alignment, and compare the end termination. While reviewing the supplied photographs, inspect the fastening slots, check the panel transition, and review the surface texture.
For wholesale selection of 04717-TZA-H50, compare gloss or plating, compare the original length, and compare visible edge height. Before final installation, compare the original edge profile, compare the end termination, and compare gloss or plating.
For a direct comparison of 04717-TZA-H50, review the end profiles, examine the visible finish, retain the removed component, and protect projecting locators. The bumper corner trim should match the original right rear profile before it is installed or released for shipment.
Installation Guidance
When preparing a Fit exterior repair, review the completed alignment, inspect damaged mounting points, and confirm the fitting direction. When checking the visible exterior face, clean the mounting channel, confirm locator engagement, and check the final perimeter.
During comparison with the original bumper trim, trial-fit without force, transfer reusable clips carefully, and avoid bending long sections. At the workshop preparation stage, inspect every screw point, review separate hardware needs, and review the completed alignment.
For a replacement on the right rear area, avoid bending long sections, review separate hardware needs, and clean the mounting channel. For a repeat wholesale order, transfer reusable clips carefully, inspect every screw point, and review the completed alignment.
Product Technical Specifications
| Product type | Bumper Corner Trim |
|---|---|
| Primary OE reference | 04717-TZA-H50 |
| Cross-reference numbers | 04717-TZA-H50 04717TZAH50 |
| Internal item code | HD02005-045 |
| Vehicle brand | HONDA |
| Vehicle model | Fit |
| Model year | 2021 |
| Installation area | Rear |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Fit 2021 (GS1 body code) |
Wholesale Supply and Packing
Before the removed component is discarded, state the destination port, request protective inner packing, and provide the delivery country. Before clips or hardware are transferred, include the complete OE number, request supported carton packing, and support the moulding length.
During an OE-led check for HD02005-045, include the complete OE number, inspect the receiving condition, and confirm separate accessory needs. During the physical comparison, confirm the packing method, provide the delivery country, and protect projecting locators.
For wholesale selection of 04717-TZA-H50, retain the product label, request export quotation terms, and include the complete OE number. When checking the visible exterior face, state the target application, state the destination port, and request supported carton packing.
When requesting HD02005-045, state OE reference 04717-TZA-H50, finish requirement verify against the original part, annual demand and shipment destination. The visible surface standard is best agreed with a physical or photographic sample.
Frequently Asked Questions
Can a photo alone verify 04717-TZA-H50?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 04717-TZA-H50 and HD02005-045 with the removed part dimensions. For Fit, compare the mounting direction, compare the end termination, review the completed alignment, and check the ordered mounting side before installation or quotation.
Is professional installation recommended for 04717-TZA-H50?
Yes. A workshop can dry-fit HD02005-045, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Fit, inspect the original contour, review nearby cover openings, retain the removed component, and confirm sample requirements before installation or quotation.
Can the opposite-side trim replace 04717-TZA-H50?
Normally no. The listing specification details the right orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For Fit, compare the removed trim, check the panel transition, protect the visible surface, and request supported carton packing before installation or quotation.
What product does OE 04717-TZA-H50 identify?
04717-TZA-H50 is listed here as a bumper corner trim. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Fit, compare the complete OE number, inspect the moulding width, review separate hardware needs, and state the required quantity before installation or quotation.
How should the position of 04717-TZA-H50 be confirmed?
This listing specification details a right component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For Fit, check nearby lamp openings, compare gloss or plating, check adjacent panel gaps, and request export quotation terms before installation or quotation.
Request a Quote
Send the complete OE reference 04717-TZA-H50, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
