F1EB-17F954-H Rear Bumper Lip for FORD Focus 2015
Product: Rear Bumper Lip
Primary OE: F1EB-17F954-H
Item code: FD02002-014
Cross-reference numbers:
F1EB-17F954-H
1876366
Brand: FORD
Model: Focus
Application reference: 2015 FORD Focus
Position: Rear
Verification: Do not select from appearance alone; compare the OE code, removed panel and actual bumper assembly.
Supply note: Keep F1EB-17F954-H and FD02002-014 on the enquiry, purchase order and packing confirmation.
F1EB-17F954-H is listed as an application-led bumper lip rather than a universal exterior part. For 2015 FORD Focus, Yongshang Auto tracks the requested rear bumper lip as FD02002-014.
FD02002-014 requires an application-specific review: The quotation should state whether the request concerns a complete lower-bumper component, an upper section or a lower section to avoid an incorrect comparison. This approach reduces dependence on exterior appearance alone.
Compatibility Review for This Reference
Fitment guidance for F1EB-17F954-H. Check the side retainer areas, upper fixing line and lower mounting pattern. Similar exterior styling does not guarantee that hidden attachment geometry is interchangeable. That comparison gives the workshop a clearer basis for a pre-paint decision.
The rear location on 2015 FORD Focus should be reviewed as follows: Check production transitions carefully when the stated year sits near a facelift. Catalogue month ranges can be more reliable than a registration year alone. That comparison gives the workshop a clearer basis for a pre-paint decision.
Product Technical Specifications
| Product type | Rear Bumper Lip |
|---|---|
| Primary OE reference | F1EB-17F954-H |
| Cross-reference numbers | F1EB-17F954-H 1876366 |
| Internal item code | FD02002-014 |
| Vehicle brand | FORD |
| Vehicle model | Focus |
| Model year | 2015 |
| Installation position | Rear lower bumper area |
| Applicable vehicle | 2015 FORD Focus |
Cover Profile and Vehicle Styling
Functional context for F1EB-17F954-H. Its broad surface restores the visual continuity of the vehicle after damage. The repairer should evaluate waviness, edge condition and aperture shape during incoming inspection. That comparison gives the workshop a clearer basis for a pre-paint decision.
Application note for item FD02002-014. The outer lower-bumper component contributes to styling and low-speed surface protection, but it is not a substitute for the reinforcement system. Buyers should quote each required assembly part separately. This approach reduces dependence on exterior appearance alone.
Surface Review Before Refinishing
Receiving note for carton FD02002-014. Trial fit with undamaged vehicle-side hardware and avoid forcing clips into position. Excessive pressure can hide an incorrect reference or create permanent deformation. This evidence belongs in the same approval file as the vehicle photographs.
Pre-finish check for 2015 FORD Focus. Store the lower-bumper component away from concentrated heat and do not place heavy cartons on top. A wide panel can develop shape problems when it is supported at only one point. This sequence keeps catalogue selection separate from cosmetic preparation.
Commercial Reference and Packing Review
A quotation for F1EB-17F954-H should reflect this guidance: Keep OE confirmation, photographs, sample findings and packing approval in one purchase file. This creates continuity from quotation through final receipt. A dated photo record makes the decision easier to review if questions arise later.
The 2 square images attached to FD02002-014 support visual review. Include the OE reference, internal item code, required quantity and destination country. Add vehicle photographs when the market version or equipment grade may affect the panel. The completed check supports a traceable discussion between buyer and supplier.
Frequently Asked Questions
Which vehicle details support selection of OE F1EB-17F954-H?
2015 FORD Focus is the stated reference for this page. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. That comparison gives the workshop a clearer basis for a pre-paint decision.
How is supplier code FD02002-014 used during purchasing?
Supplier-code context for this rear bumper lip. Discuss corner protection, face separation and keep-flat handling marks before production packing. Large exterior panels need protection from both abrasion and concentrated pressure. Keep FD02002-014 beside F1EB-17F954-H in the final commercial record.
Which observations belong in the fitment comparison record?
Panel-comparison guidance for 2015 FORD Focus. Request a full photographic record of the removed lower-bumper part and vehicle. Include labels, side retainers, upper fixings, lower mounts and all grille or lamp openings. A dated photo record makes the decision easier to review if questions arise later.
What is the recommended sequence before coating the panel?
Finishing guidance for OE F1EB-17F954-H. The workshop should accept contour, attachment points and accessory interfaces before primer, paint, drilling or trimming begins. This review is especially useful near model-year or equipment transitions.
What evidence and commercial data support sample approval?
Wholesale request for FD02002-014. Reference the exact application together with packaging limits and the intended sales market. These details help separate fitment review from freight planning. This approach reduces dependence on exterior appearance alone.
Request a Quote for F1EB-17F954-H
State whether the order is a sample, mixed-model shipment or repeat programme. bumper lips and lower valances are volume-sensitive, so carton and loading assumptions should be discussed before the freight quotation. For Yongshang Auto’s review, connect F1EB-17F954-H and FD02002-014 with the intended 2015 FORD Focus, requested quantity and delivery market.
