86695-M7000 Rear Bumper Lip for KIA K3 2021
Product: Rear Bumper Lip
Primary OE: 86695-M7000
Item code: KA02002-027
Cross-reference numbers:
86695-M7000
Brand: KIA
Model: K3
Application reference: 2021 KIA K3 (standard-spec version)
Position: Rear
Verification: Check VIN, model year, body contour and every functional opening before paint or permanent modification.
Supply note: Keep 86695-M7000 and KA02002-027 on the enquiry, purchase order and packing confirmation.
86695-M7000 supports replacement-panel purchasing when buyers need a traceable application reference. For 2021 KIA K3 (standard-spec version), Yongshang Auto tracks the requested rear bumper lip as KA02002-027.
KA02002-027 requires an application-specific review: The application record narrows the search, while final acceptance still depends on the exact vehicle configuration and original panel. The completed check supports a traceable discussion between buyer and supplier.
Repair-Shop Approval Sequence
Fitment guidance for 86695-M7000. Confirm whether the vehicle carries parking sensors, front camera equipment, headlamp washers, fog lamps, reflectors or special mouldings. Each feature can change the required holes, brackets or trim interfaces. The buyer can then connect the physical review to the supplier item record.
The rear location on 2021 KIA K3 (standard-spec version) should be reviewed as follows: Check that vehicle-side brackets, retainers and absorbers are serviceable. Damaged support parts can create an apparent fit problem that is not caused by the replacement lower-bumper component. The same information helps receiving staff identify the correct carton and panel.
Product Technical Specifications
| Product type | Rear Bumper Lip |
|---|---|
| Primary OE reference | 86695-M7000 |
| Cross-reference numbers | 86695-M7000 |
| Internal item code | KA02002-027 |
| Vehicle brand | KIA |
| Vehicle model | K3 |
| Model year | 2021 |
| Installation position | Rear lower bumper area |
| Applicable vehicle | 2021 KIA K3 (standard-spec version) |
Interface With Adjacent Components
Functional context for 86695-M7000. This service part is commonly used in collision repair, refurbishment and wholesale replacement programmes. Its suitability still depends on the specific vehicle and equipment configuration. This approach reduces dependence on exterior appearance alone.
Application note for item KA02002-027. Replacement is intended to return the outer bumper area to its designed form. Structural crash components must be inspected independently and replaced when required. This evidence belongs in the same approval file as the vehicle photographs.
Panel Inspection Prior to Paint
Receiving note for carton KA02002-027. Use clean gloves and padded supports during handling. Protecting the finish area reduces rework and keeps the inspection record clear for buyer and supplier. This approach reduces dependence on exterior appearance alone.
Pre-finish check for 2021 KIA K3 (standard-spec version). Keep the panel wrapped until a clean inspection area is available. Dust, metal filings and nearby body-shop work can mark the visible surface before painting starts. The repairer should document the outcome before transferring trim components.
Buyer Checklist for an Export Order
A quotation for 86695-M7000 should reflect this guidance: State whether the order is a sample, mixed-model shipment or repeat programme. bumper lips and lower valances are volume-sensitive, so carton and loading assumptions should be discussed before the freight quotation. The purchase team can use the recorded result when confirming the order line.
The 1 square image attached to KA02002-027 support visual review. Ask for pre-shipment photographs when the purchase programme requires packaging approval. The record should show item labels, carton condition and loading arrangement. This review is especially useful near model-year or equipment transitions.
Frequently Asked Questions
Why must the workshop verify OE 86695-M7000?
2021 KIA K3 (standard-spec version) is the stated reference for this page. Compare the new panel in an unpainted trial fit using serviceable vehicle-side brackets. Stop if gaps or mounting points require force. This review is especially useful near model-year or equipment transitions.
Why should the enquiry retain both KA02002-027 and 86695-M7000?
Supplier-code context for this rear bumper lip. Confirm the delivery market and preferred transport method. Packing design can differ between sample courier movement, consolidated sea freight and full-container supply. Keep KA02002-027 beside 86695-M7000 in the final commercial record.
What attachment points deserve attention during a dry fit?
Panel-comparison guidance for 2021 KIA K3 (standard-spec version). Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. The same information helps receiving staff identify the correct carton and panel.
What condition should be met before permanent modification?
Finishing guidance for OE 86695-M7000. The workshop should accept contour, attachment points and accessory interfaces before primer, paint, drilling or trimming begins. This approach reduces dependence on exterior appearance alone.
What information should accompany a commercial request for KA02002-027?
Wholesale request for KA02002-027. Reference the exact application together with packaging limits and the intended sales market. These details help separate fitment review from freight planning. The same information helps receiving staff identify the correct carton and panel.
Request a Quote for 86695-M7000
Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. For Yongshang Auto’s review, connect 86695-M7000 and KA02002-027 with the intended 2021 KIA K3 (standard-spec version), requested quantity and delivery market.
