71501-S4K-A00 Rear Bumper Cover for 1988 HONDA Accord
Product: Rear Bumper Cover
Primary OE: 71501-S4K-A00
Item code: HD02001-001
Cross-reference numbers:
71501-S4K-A00
Brand: HONDA
Model: Accord
Application reference: 1988 HONDA Accord
Position: Rear
Verification: Approve this rear cover only after the OE record, vehicle specification and mounting geometry agree.
Supply note: Reference HD02001-001 when discussing carton protection, labels, pallet rules and transport method.
71501-S4K-A00 is catalogued for body-shop enquiries that begin with an exact OE-number match. For 1988 HONDA Accord, Yongshang Auto tracks the requested rear bumper cover as HD02001-001.
HD02001-001 requires an application-specific review: The application record narrows the search, while final acceptance still depends on the exact vehicle configuration and original panel. The buyer can then connect the physical review to the supplier item record.
Repair-Shop Approval Sequence
Fitment guidance for 71501-S4K-A00. Use a photograph set that shows the entire old cover, both corners, the upper edge, the lower edge and every equipment opening. This allows the supplier to compare visible geometry instead of relying on a model name. This approach reduces dependence on exterior appearance alone.
The rear location on 1988 HONDA Accord should be reviewed as follows: Use a photograph set that shows the entire old cover, both corners, the upper edge, the lower edge and every equipment opening. This allows the supplier to compare visible geometry instead of relying on a model name. This sequence keeps catalogue selection separate from cosmetic preparation.
Product Technical Specifications
| Product type | Rear Bumper Cover |
|---|---|
| Primary OE reference | 71501-S4K-A00 |
| Internal item code | HD02001-001 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Application reference | 1988 HONDA Accord |
| Installation position | Rear |
| Cross-reference numbers | 71501-S4K-A00 |
| Fitment approval | OE number, VIN, production date, body contour, mounting tabs and equipment openings |
Exterior Panel Replacement Objective
Functional context for 71501-S4K-A00. This service part is commonly used in collision repair, refurbishment and wholesale replacement programmes. Its suitability still depends on the specific vehicle and equipment configuration. This review is especially useful near model-year or equipment transitions.
Application note for item HD02001-001. Replacement is intended to return the outer bumper area to its designed form. Structural crash components must be inspected independently and replaced when required. This review is especially useful near model-year or equipment transitions.
Panel Inspection Prior to Paint
Receiving note for carton HD02001-001. If the panel has been folded or closely packed for freight, follow the agreed recovery method and allow sufficient time before measuring the final contour. The purchase team can use the recorded result when confirming the order line.
Pre-finish check for 1988 HONDA Accord. Check for transit pressure marks, edge distortion, scratches and incomplete apertures. Photograph any concern before sanding, drilling, trimming or painting changes the supplied condition. The purchase team can use the recorded result when confirming the order line.
Wholesale Enquiry Information
A quotation for 71501-S4K-A00 should reflect this guidance: Send a clear old-part photograph together with the vehicle application. This gives the commercial team a practical comparison record before confirming price and lead time. This sequence keeps catalogue selection separate from cosmetic preparation.
The 3 square images attached to HD02001-001 support visual review. Keep OE confirmation, photographs, sample findings and packing approval in one purchase file. This creates continuity from quotation through final receipt. This approach reduces dependence on exterior appearance alone.
Frequently Asked Questions
What should be compared before approving OE 71501-S4K-A00?
1988 HONDA Accord is the stated reference for this page. Compare the new panel in an unpainted trial fit using serviceable vehicle-side brackets. Stop if gaps or mounting points require force. A dated photo record makes the decision easier to review if questions arise later.
Why is HD02001-001 useful on a mixed body-parts order?
Supplier-code context for this rear bumper cover. Quote the item code on every revision of the enquiry. Traceable references reduce confusion when several front, rear, upper or lower covers are reviewed together. Keep HD02001-001 beside 71501-S4K-A00 in the final commercial record.
What geometry should be checked against the removed panel?
Panel-comparison guidance for 1988 HONDA Accord. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. The buyer can then connect the physical review to the supplier item record.
Which approvals should precede sanding or drilling?
Finishing guidance for OE 71501-S4K-A00. Release the cover to paint only when the fitment record shows that OE data and physical comparison support the same application. The result should be recorded before commercial release of the requested quantity.
Which details are needed to quote OE 71501-S4K-A00 for wholesale supply?
Wholesale request for HD02001-001. State the required inspection record, sample-approval process and transport method. Large exterior panels need early agreement on protection and volume. This evidence belongs in the same approval file as the vehicle photographs.
Request a Quote for 71501-S4K-A00
If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer cover unless a quotation states otherwise. For Yongshang Auto’s review, connect 71501-S4K-A00 and HD02001-001 with the intended 1988 HONDA Accord, requested quantity and delivery market.
