80A 853 959B Left Front Door Protective Molding for AUDI Q5 2018
Primary OE reference: 80A 853 959B
Cross-reference 1: 80A 853 959B
Product type: Left Front Door Protective Molding
Applicable vehicle: AUDI Q5 2018
Installation position: Left Front Door exterior trim position
Brand: AUDI
Model: Q5
Vehicle year: 2018
Component role: adds a defined protective strip along the door surface while preserving the intended exterior styling line
Visible profile: The source notes a sport-style profile; verify the lower contour and visible face against the vehicle-side sample.
Fitment confirmation: Match the internal SKU to the OE reference on the purchase line for 80A 853 959B; This helps distinguish a door molding from an adjacent garnish or fender piece.
Physical comparison: Place the original and replacement parts together to review curvature and height; because a similar front-view photograph does not prove the same reverse geometry.
Supply scope: Standard scope follows the approved image and part number, not the complete door assembly or neighbouring exterior garnish.
Receiving focus: Support the molding on a flat protected surface and review its profile for AD02019-053; Concealed attachment geometry deserves the same inspection as the visible face.
Purchase preparation: Reference the OE identity on each wholesale enquiry line; Production-market information is useful when exterior styling differs by region.
80A 853 959B Left Front Door Protective Molding Product Overview
The photographed exterior finishing part is listed for AUDI Q5 2018. It adds a defined protective strip along the door surface while preserving the intended exterior styling line. Use every supplied image to distinguish this component from adjacent garnish pieces.
Exterior Garnish Function at the Specified Position
Check both the outward styling surface and the reverse mounting structure on 80A 853 959B at the left front door exterior trim position, because an incorrect flange depth may stop the trim from sitting flush. The source notes a sport-style profile; verify the lower contour and visible face against the vehicle-side sample.
Vehicle and OE Fitment Confirmation
Confirm whether the repair requires a front, rear or adjoining-body trim for AUDI Q5 2018 at the recorded left front door exterior trim position. An exact model code separates body parts that appear similar in isolation.
Product Technical Specifications
| Product type | Left Front Door Protective Molding |
|---|---|
| Primary OE reference | 80A 853 959B |
| Internal item code | AD02019-053 |
| Vehicle brand | AUDI |
| Model | Q5 |
| Vehicle year | 2018 |
| Installation position | Left Front Door exterior trim position |
| Applicable vehicle | AUDI Q5 2018 |
| Cross-reference numbers | 80A 853 959B |
Safe Handling, Surface Protection and Hardware Transfer
Check both ends and the body-contact edge for warping when 80A 853 959B arrives under item code AD02019-053. Mixed applications should be sorted by SKU rather than by colour alone.
Wholesale Ordering Information
Separate front, rear, left and right requirements on the purchase order when requesting 80A 853 959B for AUDI Q5 2018. Packaging can be matched to the length and visible surface of the molding.
Frequently Asked Questions
How can I confirm 80A 853 959B matches my vehicle?
Match the OE number, model, production year, required side and full mounting layout with the removed trim before ordering.
Which physical details should be compared on 80A 853 959B?
Compare the body-contact edge, clip pockets and screw locations. Because stretched retainers on the removed part can hide the original spacing.
What is included with the 80A 853 959B trim supply?
The component is prepared as an individual OE-referenced item, with matched sets available only after application and quantity approval.
What should be checked when 80A 853 959B is delivered?
Verify quantity and installation position against the packing list. Visible and hidden surfaces perform different appearance and retention functions.
What information is needed to quote 80A 853 959B?
Request carton labels by SKU for mixed-application shipments for AD02019-053. The requested scope is clearer when supplementary clips are listed independently.
