75077-0E090 Right Rear Lower Door Molding for TOYOTA Harrier 2021 onward
Primary OE reference: 75077-0E090
Cross-reference 1: 75077-0E090
Product type: Right Rear Lower Door Molding
Applicable vehicle: TOYOTA Harrier 2021 onward
Installation position: Right Rear Door exterior trim position
Brand: TOYOTA
Model: Harrier
Vehicle year: 2021 onward
Component role: covers the lower door section, helps shield the visible panel edge and completes the lower-body styling line
Visible profile: The source identifies a bright or chrome-accented design; compare the insert, gloss and end profile with the removed part.
Fitment confirmation: Inspect any readable label or molded code on the removed component for 75077-0E090; This helps distinguish a door molding from an adjacent garnish or fender piece.
Physical comparison: Match the joint where the trim meets the next garnish or body panel; because a small length difference can leave a visible gap at the adjoining panel.
Supply scope: Standard scope follows the approved image and part number, not the complete door assembly or neighbouring exterior garnish.
Receiving focus: Verify quantity and installation position against the packing list for TY02019-010; Concealed attachment geometry deserves the same inspection as the visible face.
Purchase preparation: Send the OE number, vehicle year, model and required side; Complete application data keeps the quotation tied to the intended component.
75077-0E090 Right Rear Lower Door Molding Product Overview
This door-side supply record is matched with TOYOTA Harrier 2021 onward. It covers the lower door section, helps shield the visible panel edge and completes the lower-body styling line. Use every supplied image to distinguish this component from adjacent garnish pieces.
Replacement Trim Function in the Vehicle Side Profile
Check both the outward styling surface and the reverse mounting structure on 75077-0E090 at the right rear door exterior trim position, to prevent load from being transferred into a misaligned clip pocket. The source identifies a bright or chrome-accented design; compare the insert, gloss and end profile with the removed part.
Vehicle and OE Fitment Confirmation
Check the vehicle-side clip pattern before the order is packed for TOYOTA Harrier 2021 onward at the recorded right rear door exterior trim position. The purchase order should state one side, a matched pair or the required quantity.
Product Technical Specifications
| Product type | Right Rear Lower Door Molding |
|---|---|
| Primary OE reference | 75077-0E090 |
| Internal item code | TY02019-010 |
| Vehicle brand | TOYOTA |
| Model | Harrier |
| Vehicle year | 2021 onward |
| Installation position | Right Rear Door exterior trim position |
| Applicable vehicle | TOYOTA Harrier 2021 onward |
| Cross-reference numbers | 75077-0E090 |
Safe Handling, Surface Protection and Hardware Transfer
Compare the reverse face with the retained original trim when 75077-0E090 arrives under item code TY02019-010. Visible and hidden surfaces perform different appearance and retention functions.
Wholesale Ordering Information
Identify any deadline linked to a repair or stocking programme when requesting 75077-0E090 for TOYOTA Harrier 2021 onward. Quantity and destination information support suitable carton planning.
Frequently Asked Questions
How can I confirm 75077-0E090 matches my vehicle?
Match the OE number, model, production year, required side and full mounting layout with the removed trim before ordering.
Which physical details should be compared on 75077-0E090?
Check each recessed attachment point and the visible edge alignment. So the finished edge follows the vehicle bodywork cleanly.
What is included with the 75077-0E090 trim supply?
The OE-numbered molding is supplied according to the displayed photographs; any supplementary retainer kit must be confirmed separately.
What should be checked when 75077-0E090 is delivered?
Separate left and right pieces before mixed orders reach installation. Retainer condition affects stability even when the visible profile is correct.
What information is needed to quote 75077-0E090?
Attach the original-part label when the molded code is difficult to read for TY02019-010. The requested scope is clearer when supplementary clips are listed independently.
