76258-TC4-H01 Left Exterior Side Mirror Assembly for HONDA XR-V 2015
Primary OE reference: 76258-TC4-H01
Cross-reference 1: 76258-TC4-H01
Product type: Exterior Side Mirror Assembly
Applicable vehicle: HONDA XR-V 2015
Installation position: Left exterior mirror position
Brand: HONDA
Model: XR-V
Vehicle year: 2015
Listed mirror features: confirm connector, pin count and mirror controls against the original part
Mirror function: Replaces the mirror base and visible rearward field for repair stock tied to the listed OE reference so the mirror can be compared against the removed unit.
Mounting comparison: Inspect the door-side bolt pattern from the inner mounting face so electrical functions remain compatible.
Electrical review: Trace the manual control cable before optional functions are promised to prevent a connector mismatch.
Fitment confirmation: Use 76258-TC4-H01 as the purchasing reference, then compare the left exterior mirror position with the removed component.
Supplied component scope: Painted appearance in a photograph does not replace verification of the required housing and electrical content.
Receiving priority: Assess the painted or unpainted cover at warehouse receiving so every received unit can be accounted for.
Handling note: Confirm the carton-supported corners with transit packaging retained so left and right mirrors remain separated.
Wholesale enquiry: List left and right quantities separately when a mixed-side distributor order is requested.
Order preparation: Reference the original-mirror photograph for every purchase line so lead time can be reviewed correctly.
Internal item code: HD02014-036
76258-TC4-H01 Exterior Side Mirror Assembly Product Overview
76258-TC4-H01 identifies an exterior side mirror assembly for the left exterior mirror position on HONDA XR-V 2015. Completes the side-specific mirror assembly location during a side-mirror replacement project while preserving the listed fitment identity. The page records HD02014-036 as the internal ordering code for this specific mirror line.
Mirror Position and Visibility Role
Renews the outside viewing surface and housing without treating a similar housing as universal so workshop planning starts with the correct part. Preserves the roadside awareness point beside the front door when the original mirror can no longer be reused to support safe rearward observation. Completes the exterior mirror mounting envelope for the stated production year and model without mixing visually similar door mirrors. The recorded side is Left, so it should not be exchanged with the opposite mirror position.
Vehicle and OE Fitment Confirmation
Match the triangular mounting base against the removed mirror before paint and assembly labour are committed. Match the manual cable or electrical controls before body-color work begins to confirm the supplied mirror side. Inspect the door-side bolt pattern before reusable trim is transferred to prevent an incorrect housing selection. Compare mounting studs, housing profile and plug shape before approving HD02014-036 for installation.
Electrical and Housing Checks
Document the harness exit direction during bench comparison before the workshop schedules installation. Compare the available pin positions without assuming every trim shares one harness so unsupported functions are not claimed. Protect the plug keying and latch before the old mirror is disconnected so unsupported functions are not claimed. The listed feature reference is confirm connector, pin count and mirror controls against the original part; confirm any optional function physically before installation.
Product Technical Specifications
| Product type | Exterior Side Mirror Assembly |
|---|---|
| Primary OE reference | 76258-TC4-H01 |
| Cross-reference numbers | 76258-TC4-H01 |
| Internal item code | HD02014-036 |
| Vehicle brand | HONDA |
| Vehicle model | XR-V |
| Model year | 2015 |
| Installation position | Left exterior mirror position |
| Listed mirror features | confirm connector, pin count and mirror controls against the original part |
| Fitment priority | Compare OE identity, mounting base, connector and left-right position |
Installation and Receiving Inspection
Confirm the signal lens on a clean padded surface before the repair schedule is affected. Confirm the mirror glass on a clean padded surface to keep the correct SKU traceable. Confirm the edge seals and clips against the approved reference before a distorted base is fitted. Mirror glass and projecting studs should remain protected until the fitment comparison is complete.
Wholesale Ordering Information
Confirm the connector-side photograph when mixed-model stock is required so lead time can be reviewed correctly. Include the internal item code on repeat distributor orders to make repeat ordering more reliable. Specify the required mirror side before carton planning to make repeat ordering more reliable. Provide an original-part photograph when the OE label is incomplete or multiple mirror variants exist.
Frequently Asked Questions
Which vehicle is 76258-TC4-H01 listed for?
The recorded application is HONDA XR-V 2015. Production date, trim equipment and connector details still require physical verification.
Can 76258-TC4-H01 fit every XR-V model year?
No. Door geometry, connectors, lamps and folding functions can change by year or trim. Use the listed year and OE identity.
How should 76258-TC4-H01 be handled during installation?
Protect the folding pivot before electrical testing begins so left and right mirrors remain separated. Avoid supporting the assembly by the glass or forcing the folding joint.
Is 76258-TC4-H01 a left or right side mirror?
76258-TC4-H01 is recorded for the left exterior mirror position. Compare the mounting base orientation with the removed part.
Does 76258-TC4-H01 include every electrical function?
The listed feature reference is confirm connector, pin count and mirror controls against the original part. Supply follows the photographed component; unrelated door trim, switchgear and loose fasteners are separate unless shown.
