F1EB-13LO19-A Front Left Headlight Washer Nozzle Cover for FORD Focus 2015
Primary OE reference: F1EB-13LO19-A
Cross-reference number 1: F1EB-13LO19-A
Cross-reference number 2: F1EB13LO19A
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: FORD Focus 2015
Installation position: Front bumper / headlight washer area
Side: Left
Brand: FORD
Model: Focus
Model year: 2015
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: FD02010-001
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
F1EB-13LO19-A Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under F1EB-13LO19-A is a front left headlight washer nozzle cover intended for FORD Focus 2015. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Focus
Compatibility for F1EB-13LO19-A should be confirmed against FORD Focus 2015 and the left installation side. The review should match the exact model year and bumper revision, confirm the destination-market equipment specification, and confirm whether a cap, nozzle, bracket or complete assembly is required. Use the removed part and product photographs to check regional variations in headlamp-cleaning equipment, compare every tab, clip seat and locating shoulder, and check the washer jet position relative to the headlamp lens; finally, match the exact model year and bumper revision and confirm the destination-market equipment specification.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of FD02010-001 should be checked separately. For this headlight washer nozzle cover, review the spring-loaded return features where fitted, check the bumper-facing surface for transport marks, and inspect the hose connector for ovality. A direct comparison with the removed part should additionally compare the outer surface profile with the bumper opening, review the sealing area around the hose connection, and check each molded locator against the original component. Before the item is accepted, inspect the molded tabs for cracks or distortion and compare the cap-to-support engagement method.
OE Identification and Side Confirmation
F1EB-13LO19-A is the primary OE identity for this left front left headlight washer nozzle cover, while FD02010-001 is the internal item code. Match both references to the vehicle record, then retain the removed component for a direct physical comparison. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for FD02010-001 begins before the bumper area is disturbed: test for drips after the washer pump stops and align the cover flush with the bumper surface. During trial fitting, confirm sufficient clearance behind the bumper, retain the original fasteners unless replacements are specified, and avoid forcing a mirrored part into the bumper opening. Before returning the vehicle to service, reconnect every hose clip before filling the system, disconnect the fluid hose without twisting the plastic spigot, and tighten bracket hardware only after alignment.
Receiving Inspection
When FD02010-001 arrives, receiving staff should verify the supplied scope before discarding dividers or inner bags, compare connector depth and hose angle with the retained original part, and inspect mounting holes for flash, blockage or edge damage. Before workshop release, confirm the bumper-facing edge has not been compressed in transit, photograph the received item if the vehicle fitment is still pending, retain the OE label until the washer system has passed its function test, and separate mirrored components immediately after carton opening. Complete the inspection by ensuring that staff check the cap hinge or retaining point for free movement, verify that protective plugs remain in open fluid connections, and compare the visible surface texture with the ordered specification.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | F1EB-13LO19-A |
| Cross-reference numbers | F1EB-13LO19-A F1EB13LO19A |
| Internal item code | FD02010-001 |
| Vehicle brand | FORD |
| Vehicle model | Focus |
| Model year | 2015 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | FORD Focus 2015 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of F1EB-13LO19-A, please send photographs of the removed washer part, request moisture protection for sea freight, and request protective inner wrapping for painted faces. Packing instructions should use dividers to prevent caps from rubbing each other, confirm sample requirements before a bulk order, and verify the packed quantity by OE reference. Before dispatch, confirm whether caps and nozzles should be supplied as pairs and protect each nozzle outlet from dust during transit.
Frequently Asked Questions
What information should accompany a F1EB-13LO19-A enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For item FD02010-001, the approval should protect hose spigots and projecting tabs. The same item record should also confirm whether the visible cover needs a primed or finished surface.
What should be inspected when F1EB-13LO19-A arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. On the listed FORD Focus 2015, technicians should inspect the rear locator shape without forcing any movable section. A workshop comparison should additionally verify the cover contour against the approved product photograph.
Which side uses F1EB-13LO19-A?
This front left headlight washer nozzle cover is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For the left-side order line, check the cap hinge or retaining point. The order review should further check the cap hinge or retaining point.
How should F1EB-13LO19-A be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. The product-specific check for F1EB-13LO19-A should check carton labels at receiving. Receiving staff should also confirm the acceptable delivery window.
Which vehicle application is listed for F1EB-13LO19-A?
F1EB-13LO19-A is listed for FORD Focus 2015. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. Before this headlight washer nozzle cover is accepted, check regional variations in headlamp-cleaning equipment. Before approval, the buyer or technician should retain the removed component for a direct physical comparison.
