8R0955276 Front Right Headlight Washer Nozzle Cover for AUDI Q5 2010
Primary OE reference: 8R0955276
Cross-reference number 1: 8R0 955 276
Cross-reference number 2: 8R0955276
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI Q5 2010
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: Q5
Model year: 2010
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-097
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8R0955276 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 8R0955276 is a front right headlight washer nozzle cover intended for AUDI Q5 2010. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q5
Compatibility for 8R0955276 should be confirmed against AUDI Q5 2010 and the right installation side. The review should compare the complete OE marking with the removed washer component, compare the actuator orientation behind the bumper cover, and confirm the front bumper option before ordering. Use the removed part and product photographs to compare the hose connection or cover hinge with the original part, compare every tab, clip seat and locating shoulder, and review facelift and pre-facelift washer layouts; finally, compare the nozzle travel direction with the vehicle-side installation and confirm that the vehicle is equipped with a factory headlight washer system.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-097 should be checked separately. For this headlight washer nozzle cover, inspect the washer outlet for blockage, check the nozzle outlet orientation, and review the bracket stiffness and screw seats. A direct comparison with the removed part should additionally compare the depth of the actuator body, inspect the molded tabs for cracks or distortion, and check the bumper-facing surface for transport marks. Before the item is accepted, review the clip geometry on the rear face and compare the cap perimeter and corner radii.
OE Identification and Side Confirmation
8R0955276 is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-097 is the internal item code. Match both references to the vehicle record, then confirm the destination-market equipment specification. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-097 begins before the bumper area is disturbed: verify that the cap remains attached through a full washer cycle and tighten bracket hardware only after alignment. During trial fitting, follow the vehicle workshop procedure for bumper removal, keep dirt out of open washer-fluid lines, and confirm sufficient clearance behind the bumper. Before returning the vehicle to service, inspect nearby wiring and sensors before refitting trim, paint or finish visible covers before final installation when required, and check that the washer unit is fully seated in its guide.
Receiving Inspection
When AD02010-097 arrives, receiving staff should match the item label to the purchase order and OE reference, confirm that loose accessories are identified on the packing list, and separate mirrored components immediately after carton opening. Before workshop release, confirm the internal item code before mixed stock is shelved, check molded tabs for whitening, cracks or transport stress, check painted or primed surfaces under neutral lighting, and verify that protective plugs remain in open fluid connections. Complete the inspection by ensuring that staff document any shortage before the receiving inspection is closed, review the hose spigot for impact damage or distortion, and compare connector depth and hose angle with the retained original part.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8R0955276 |
| Cross-reference numbers | 8R0 955 276 8R0955276 |
| Internal item code | AD02010-097 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2010 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI Q5 2010 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8R0955276, please separate fragile actuator bodies from heavier metal parts, verify the packed quantity by OE reference, and state the required order quantity. Packing instructions should confirm whether the visible cover needs a primed or finished surface, confirm sample requirements before a bulk order, and identify project stock and service stock separately. Before dispatch, provide the consignee and freight-forwarder details and use dividers to prevent caps from rubbing each other.
Frequently Asked Questions
Is 8R0955276 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For item AD02010-097, the approval should state the target vehicle application. The same item record should also protect each nozzle outlet from dust during transit.
What should be inspected when 8R0955276 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. On the listed AUDI Q5 2010, technicians should review the production finish against the approved sample. A workshop comparison should additionally check the cap hinge or retaining point for free movement.
How should 8R0955276 be packed for export?
The front right headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For the right-side order line, confirm whether the visible cover needs a primed or finished surface. The order review should further use dividers to prevent caps from rubbing each other.
Are clips, hoses or fasteners supplied with 8R0955276?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. The product-specific check for 8R0955276 should separate fragile actuator bodies from heavier metal parts. Receiving staff should also confirm sample requirements before a bulk order.
What information should accompany a 8R0955276 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. Before this headlight washer nozzle cover is accepted, use dividers to prevent caps from rubbing each other. Before approval, the buyer or technician should confirm the preferred incoterm.
