8R0955276C Front Right Headlight Washer Nozzle Cover for AUDI Q5 2013
Primary OE reference: 8R0955276C
Cross-reference number 1: 8R0 955 276 C
Cross-reference number 2: 8R0955276C
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI Q5 2013
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: Q5
Model year: 2013
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-095
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8R0955276C Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 8R0955276C is a front right headlight washer nozzle cover intended for AUDI Q5 2013. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q5
Compatibility for 8R0955276C should be confirmed against AUDI Q5 2013 and the right installation side. The review should review painted, primed and unpainted finish requirements, compare product photographs with the removed part from several angles, and check whether the bumper is standard or sport specification. Use the removed part and product photographs to compare the actuator orientation behind the bumper cover, compare every tab, clip seat and locating shoulder, and confirm that the vehicle is equipped with a factory headlight washer system; finally, check the production date where model-year transitions overlap and verify nearby parking-sensor or trim interfaces.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-095 should be checked separately. For this headlight washer nozzle cover, review the clip geometry on the rear face, check the bumper-facing surface for transport marks, and inspect the molded tabs for cracks or distortion. A direct comparison with the removed part should additionally compare the depth of the actuator body, review the bracket stiffness and screw seats, and check the nozzle outlet orientation. Before the item is accepted, inspect the washer outlet for blockage and compare the visible bumper-side contour.
OE Identification and Side Confirmation
8R0955276C is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-095 is the internal item code. Match both references to the vehicle record, then compare the hose connection or cover hinge with the original part. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-095 begins before the bumper area is disturbed: work with the washer system depressurized and inspect nearby wiring and sensors before refitting trim. During trial fitting, trial-fit the component before final fastening, reconnect every hose clip before filling the system, and check the system for leaks after reconnection. Before returning the vehicle to service, check the headlamp lens receives an even spray, replace distorted clips or damaged seals, and retain the original fasteners unless replacements are specified.
Receiving Inspection
When AD02010-095 arrives, receiving staff should verify that protective plugs remain in open fluid connections, review the production finish against the approved sample, and verify the nozzle head returns smoothly without applying excess force. Before workshop release, inspect the visible cover face for scratches or pressure marks, verify the cover contour against the approved product photograph, check painted or primed surfaces under neutral lighting, and photograph the received item if the vehicle fitment is still pending. Complete the inspection by ensuring that staff compare the visible surface texture with the ordered specification, measure the main mounting span when two bumper versions appear similar, and inspect the fluid passage only with clean, non-damaging tools.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8R0955276C |
| Cross-reference numbers | 8R0 955 276 C 8R0955276C |
| Internal item code | AD02010-095 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2013 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI Q5 2013 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8R0955276C, please confirm sample requirements before a bulk order, list model years and bumper versions for mixed orders, and request export-carton dimensions before freight booking. Packing instructions should state the target vehicle application, confirm whether caps and nozzles should be supplied as pairs, and identify project stock and service stock separately. Before dispatch, request barcode or private-label details when needed and check carton labels at receiving.
Frequently Asked Questions
Can product photographs alone confirm 8R0955276C compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For item AD02010-095, the approval should verify the required left or right installation side. The same item record should also compare the actuator orientation behind the bumper cover.
Does the finish specification matter for 8R0955276C?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. On the listed AUDI Q5 2013, technicians should check the bumper-facing surface for transport marks. A workshop comparison should additionally check whether the visible part requires painting.
What information should accompany a 8R0955276C enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For the right-side order line, list model years and bumper versions for mixed orders. The order review should further use dividers to prevent caps from rubbing each other.
Is workshop installation recommended for 8R0955276C?
Yes. A qualified workshop can access the bumper area on the Q5, transfer hoses or clips safely and test the washer system for correct operation and leaks. The product-specific check for 8R0955276C should test the spray direction before returning the vehicle. Receiving staff should also verify that the cover closes without rubbing the bumper.
Which side uses 8R0955276C?
This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. Before this headlight washer nozzle cover is accepted, compare the distance between mounting points. Before approval, the buyer or technician should check the joint between the visible cap and hidden support.
