76886-TRO-S01 Front Left Headlight Washer Nozzle Cover for HONDA Civic 2012
Primary OE reference: 76886-TRO-S01
Cross-reference number 1: 76886-TRO-S01
Cross-reference number 2: 76886TROS01
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: HONDA Civic 2012
Installation position: Front bumper / headlight washer area
Side: Left
Brand: HONDA
Model: Civic
Model year: 2012
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-017
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76886-TRO-S01 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 76886-TRO-S01 is a front left headlight washer nozzle cover intended for HONDA Civic 2012. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Civic
Compatibility for 76886-TRO-S01 should be confirmed against HONDA Civic 2012 and the left installation side. The review should retain the removed component for a direct physical comparison, check whether the bumper is standard or sport specification, and check the washer jet position relative to the headlamp lens. Use the removed part and product photographs to match the connector and fluid inlet position where applicable, compare the actuator orientation behind the bumper cover, and compare the washer opening beside the correct headlamp; finally, separate mirrored left and right items during inventory selection and compare every tab, clip seat and locating shoulder.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-017 should be checked separately. For this headlight washer nozzle cover, compare the depth of the actuator body, inspect the rear reinforcement ribs, and check the bumper-facing surface for transport marks. A direct comparison with the removed part should additionally review the engagement of the cover with the nozzle stem, compare the cap perimeter and corner radii, and inspect the hose connector for ovality. Before the item is accepted, check the complete supplied scope against the photographs and review the hose spigot angle on the washer nozzle.
OE Identification and Side Confirmation
76886-TRO-S01 is the primary OE identity for this left front left headlight washer nozzle cover, while HD02010-017 is the internal item code. Match both references to the vehicle record, then separate mirrored left and right items during inventory selection. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-017 begins before the bumper area is disturbed: tighten bracket hardware only after alignment and compare the installed height with the opposite side. During trial fitting, inspect the bumper opening after the trial fit, disconnect the fluid hose without twisting the plastic spigot, and test the spray direction before returning the vehicle. Before returning the vehicle to service, follow the vehicle workshop procedure for bumper removal, reconnect every hose clip before filling the system, and confirm that no hose is pinched behind the bumper.
Receiving Inspection
When HD02010-017 arrives, receiving staff should inspect the visible cover face for scratches or pressure marks, separate mirrored components immediately after carton opening, and inspect the visible cover face for scratches or pressure marks. Before workshop release, separate mirrored components immediately after carton opening, inspect the visible cover face for scratches or pressure marks, separate mirrored components immediately after carton opening, and inspect the visible cover face for scratches or pressure marks. Complete the inspection by ensuring that staff separate mirrored components immediately after carton opening, inspect the visible cover face for scratches or pressure marks, and separate mirrored components immediately after carton opening.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76886-TRO-S01 |
| Cross-reference numbers | 76886-TRO-S01 76886TROS01 |
| Internal item code | HD02010-017 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | 2012 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | HONDA Civic 2012 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76886-TRO-S01, please use dividers to prevent caps from rubbing each other, send photographs of the removed washer part, and state the target vehicle application. Packing instructions should separate fragile actuator bodies from heavier metal parts, provide the complete destination address or port, and request export-carton dimensions before freight booking. Before dispatch, state the requested delivery schedule and state the required order quantity.
Frequently Asked Questions
Is a sample order available for 76886-TRO-S01?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For item HD02010-017, the approval should state the target vehicle application. The same item record should also list model years and bumper versions for mixed orders.
What should be inspected when 76886-TRO-S01 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. On the listed HONDA Civic 2012, technicians should review the production finish against the approved sample. A workshop comparison should additionally check painted or primed surfaces under neutral lighting.
Is workshop installation recommended for 76886-TRO-S01?
Yes. A qualified workshop can access the bumper area on the Civic, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the left-side order line, reconfirm the OE number before discarding the packaging. The order review should further verify that the cover closes without rubbing the bumper.
Should the washer system be tested after fitting 76886-TRO-S01?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. The product-specific check for 76886-TRO-S01 should trial-fit the component before final fastening. Receiving staff should also disconnect the fluid hose without twisting the plastic spigot.
How should 76886-TRO-S01 be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. Before this headlight washer nozzle cover is accepted, confirm whether the visible cover needs a primed or finished surface. Before approval, the buyer or technician should confirm sample approval before mass shipment.
