76885-TRO-S01 Front Left Headlight Washer Nozzle for HONDA Civic 2012
Primary OE reference: 76885-TRO-S01
Cross-reference number 1: 76885-TRO-S01
Cross-reference number 2: 76885TROS01
Product type: Front Left Headlight Washer Nozzle
Vehicle application: HONDA Civic 2012
Installation position: Front bumper / headlight washer area
Side: Left
Brand: HONDA
Model: Civic
Model year: 2012
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: HD02010-019
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76885-TRO-S01 Front Left Headlight Washer Nozzle Product Overview
The component shown under 76885-TRO-S01 is a front left headlight washer nozzle intended for HONDA Civic 2012. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Civic
Compatibility for 76885-TRO-S01 should be confirmed against HONDA Civic 2012 and the left installation side. The review should check the washer jet position relative to the headlamp lens, verify that the OE reference is not for the opposite side, and confirm that the vehicle is equipped with a factory headlight washer system. Use the removed part and product photographs to compare the nozzle travel direction with the vehicle-side installation, review facelift and pre-facelift washer layouts, and compare every tab, clip seat and locating shoulder; finally, compare the hose connection or cover hinge with the original part and confirm the front bumper option before ordering.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of HD02010-019 should be checked separately. For this headlight washer nozzle, check the complete supplied scope against the photographs, review the engagement of the cover with the nozzle stem, and compare the depth of the actuator body. A direct comparison with the removed part should additionally inspect the telescopic body for smooth movement, check the joint between the visible cap and hidden support, and review the left-to-right mirrored geometry. Before the item is accepted, compare the cap-to-support engagement method and inspect the molded tabs for cracks or distortion.
OE Identification and Side Confirmation
76885-TRO-S01 is the primary OE identity for this left front left headlight washer nozzle, while HD02010-019 is the internal item code. Match both references to the vehicle record, then confirm that the vehicle is equipped with a factory headlight washer system. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-019 begins before the bumper area is disturbed: protect the painted bumper surface during removal and trial-fit the component before final fastening. During trial fitting, confirm that the nozzle extends and retracts freely, avoid forcing a mirrored part into the bumper opening, and support the bumper cover while accessing the hidden actuator. Before returning the vehicle to service, follow the vehicle workshop procedure for bumper removal, inspect nearby wiring and sensors before refitting trim, and compare the installed height with the opposite side.
Receiving Inspection
When HD02010-019 arrives, receiving staff should compare the visible surface texture with the ordered specification, compare the supplied side with the vehicle repair order, and confirm that loose accessories are identified on the packing list. Before workshop release, verify that protective plugs remain in open fluid connections, inspect the fluid passage only with clean, non-damaging tools, inspect the rear locator shape without forcing any movable section, and check the cap hinge or retaining point for free movement. Complete the inspection by ensuring that staff verify the nozzle head returns smoothly without applying excess force, check the spring-return area where the component includes an actuator, and separate mirrored components immediately after carton opening.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 76885-TRO-S01 |
| Cross-reference numbers | 76885-TRO-S01 76885TROS01 |
| Internal item code | HD02010-019 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | 2012 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | HONDA Civic 2012 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76885-TRO-S01, please list model years and bumper versions for mixed orders, retain the product label until fitment is confirmed, and use dividers to prevent caps from rubbing each other. Packing instructions should identify painted and unpainted variants on separate lines, confirm whether the visible cover needs a primed or finished surface, and request export-carton dimensions before freight booking. Before dispatch, confirm the preferred incoterm and request a packing-list breakdown by internal item code.
Frequently Asked Questions
Can 76885-TRO-S01 fit every Civic model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item HD02010-019, the approval should check whether the original cover is supplied separately from its support. The same item record should also compare product photographs with the removed part from several angles.
What information should accompany a 76885-TRO-S01 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. On the listed HONDA Civic 2012, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally use dividers to prevent caps from rubbing each other.
Are clips, hoses or fasteners supplied with 76885-TRO-S01?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For the left-side order line, request moisture protection for sea freight. The order review should further use dividers to prevent caps from rubbing each other.
Does the finish specification matter for 76885-TRO-S01?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. The product-specific check for 76885-TRO-S01 should compare the cap-to-support engagement method. Receiving staff should also compare the cap-to-support engagement method.
Which side uses 76885-TRO-S01?
This front left headlight washer nozzle is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. Before this headlight washer nozzle is accepted, compare the depth of the actuator body. Before approval, the buyer or technician should check the fluid inlet for storage contamination.
