76885-TL0-S01 Front Left Headlight Washer Nozzle for HONDA Spirior 2009
Primary OE reference: 76885-TL0-S01
Cross-reference number 1: 76885-TL0-S01
Cross-reference number 2: 76885TL0S01
Product type: Front Left Headlight Washer Nozzle
Vehicle application: HONDA Spirior 2009
Installation position: Front bumper / headlight washer area
Side: Left
Brand: HONDA
Model: Spirior
Model year: 2009
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: HD02010-013
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76885-TL0-S01 Front Left Headlight Washer Nozzle Product Overview
The component shown under 76885-TL0-S01 is a front left headlight washer nozzle intended for HONDA Spirior 2009. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Spirior
Compatibility for 76885-TL0-S01 should be confirmed against HONDA Spirior 2009 and the left installation side. The review should review body-style differences within the same model generation, compare the actuator orientation behind the bumper cover, and match the exact model year and bumper revision. Use the removed part and product photographs to confirm that the listed model designation matches the vehicle, check the production date where model-year transitions overlap, and separate mirrored left and right items during inventory selection; finally, compare the nozzle travel direction with the vehicle-side installation and confirm the destination-market equipment specification.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of HD02010-013 should be checked separately. For this headlight washer nozzle, inspect the molded tabs for cracks or distortion, compare the visible bumper-side contour, and review the hose spigot angle on the washer nozzle. A direct comparison with the removed part should additionally check the cap hinge or retaining point, inspect the telescopic body for smooth movement, and compare the outer surface profile with the bumper opening. Before the item is accepted, review the clip geometry on the rear face and check the nozzle outlet orientation.
OE Identification and Side Confirmation
76885-TL0-S01 is the primary OE identity for this left front left headlight washer nozzle, while HD02010-013 is the internal item code. Match both references to the vehicle record, then compare product photographs with the removed part from several angles. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-013 begins before the bumper area is disturbed: route the washer hose away from sharp edges and clean the hose and connector before assembly. During trial fitting, follow the vehicle workshop procedure for bumper removal, check that the washer unit is fully seated in its guide, and test for drips after the washer pump stops. Before returning the vehicle to service, retain the original fasteners unless replacements are specified, disconnect the fluid hose without twisting the plastic spigot, and confirm that the nozzle extends and retracts freely.
Receiving Inspection
When HD02010-013 arrives, receiving staff should measure the main mounting span when two bumper versions appear similar, compare left and right orientation before removing protective wrapping, and separate mirrored components immediately after carton opening. Before workshop release, inspect the fluid passage only with clean, non-damaging tools, record carton damage before the item is moved to workshop stock, confirm that small seals or clips have not remained in the wrapping, and check molded tabs for whitening, cracks or transport stress. Complete the inspection by ensuring that staff confirm the bumper-facing edge has not been compressed in transit, check the carton partition for evidence of part-to-part contact, and check the spring-return area where the component includes an actuator.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 76885-TL0-S01 |
| Cross-reference numbers | 76885-TL0-S01 76885TL0S01 |
| Internal item code | HD02010-013 |
| Vehicle brand | HONDA |
| Vehicle model | Spirior |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | HONDA Spirior 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76885-TL0-S01, please request barcode or private-label details when needed, use dividers to prevent caps from rubbing each other, and state the required order quantity. Packing instructions should protect hose spigots and projecting tabs, retain the product label until fitment is confirmed, and confirm sample approval before mass shipment. Before dispatch, send photographs of the removed washer part and list model years and bumper versions for mixed orders.
Frequently Asked Questions
Can 76885-TL0-S01 fit every Spirior model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item HD02010-013, the approval should verify the required left or right installation side. The same item record should also compare the actuator orientation behind the bumper cover.
Why must left and right versions of 76885-TL0-S01 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. On the listed HONDA Spirior 2009, technicians should review the sealing area around the hose connection. A workshop comparison should additionally review the left-to-right mirrored geometry.
What information should accompany a 76885-TL0-S01 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For the left-side order line, list model years and bumper versions for mixed orders. The order review should further use dividers to prevent caps from rubbing each other.
What should be inspected when 76885-TL0-S01 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. The product-specific check for 76885-TL0-S01 should check the cap hinge or retaining point for free movement. Receiving staff should also confirm that loose accessories are identified on the packing list.
How should 76885-TL0-S01 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. Before this headlight washer nozzle is accepted, review facelift and pre-facelift washer layouts. Before approval, the buyer or technician should check regional variations in headlamp-cleaning equipment.
