71140-TFT-H00 Front Right Headlight Mounting Bracket for HONDA Vezel 2019

71140-TFT-H00 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-TFT-H00 is a front right headlight mounting bracket intended for HONDA Vezel 2019. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Vezel

Before confirming export packing for 71140-TFT-H00, check nearby body-panel interfaces, review regional specification differences, and compare the headlight outline at both ends. For a repeat wholesale purchase, confirm the front installation position, confirm whether the vehicle uses a special appearance package, and review the orientation of the moulded bracket.

During an OE-led review for HD02009-113, verify the trim package named in the application, check whether the original part is mirrored, and compare the stamped or moulded reference. During the physical comparison, review headlamp shape changes between production phases, confirm whether the vehicle uses a special appearance package, and match the accessory to the original bumper revision.

For wholesale selection of 71140-TFT-H00, check the lamp manufacturer where multiple units were fitted, check the relationship with the lamp housing, and match the locator-slot arrangement. When checking the headlamp opening, confirm whether the vehicle uses a special appearance package, retain the original component for a direct comparison, and confirm the decorative finish or painted surface.

Headlight Mounting Bracket Design and Replacement Notes

When preparing a Vezel body repair, confirm decorative surface details, review narrow tips for transport damage, and inspect the moulded front face and rear ribs. For a no-force trial fit, compare surrounding grille openings, check the adjoining panel gap, and compare the original edge profile.

During comparison with the original lamp surround, inspect the junction with the fender edge, review the direction of the locating tabs, and inspect reinforcement features behind the part. While checking adjacent body parts, review nearby cover openings, inspect moulded corners before installation, and inspect the visible face for transport scuffing.

Before confirming export packing for 71140-TFT-H00, compare the original edge profile, inspect the overall frame width, and compare the centre alignment point. Before the quotation is confirmed, compare surrounding grille openings, check the transition to the bumper or grille, and review the thickness around each mounting boss.

Application-Specific Identification

Before a replacement is packed with 71140-TFT-H00 on the Vezel 2019: match the outer profile around the headlamp. The HD02009-113 sample for the right side should inspect the overall frame width. Before installation, inspect broken vehicle-side mounts; for a quotation, state any outer-carton marking requirements.

For side-specific inventory control with 71140-TFT-H00 on the Vezel 2019: confirm the destination-market version. The HD02009-113 sample for the right side should compare the centre alignment point. Before installation, verify that the headlamp remains centred; for a quotation, identify mixed-OE orders clearly.

For an export quotation with 71140-TFT-H00 on the Vezel 2019: match the body style and equipment grade. The HD02009-113 sample for the right side should compare gloss level with the neighbouring trim. Before installation, avoid bending narrow moulded tabs; for a quotation, ask for carton dimensions before freight booking.

Installation Guidance

Before the original trim or bracket is discarded, protect painted and chrome surfaces, inspect broken vehicle-side mounts, and confirm that every locator engages. When organizing mixed-OE inventory, check lamp-to-trim clearance, protect exposed edges during removal, and confirm an evenly seated fit.

For HONDA Vezel 2019, confirm that every locator engages, verify that the headlamp remains centred, and reconfirm the OE reference after the trial fit. While reviewing the supplied photographs, keep the removed part nearby for comparison, complete a visual check under even lighting, and ensure that all removed hardware is accounted for.

When preparing a Vezel body repair, protect exposed edges during removal, photograph the completed installation for order records, and inspect the surrounding guides. Before final installation, trial-fit the component without force, compare the installed height with the opposite side, and confirm that every locator engages.

Product Technical Specifications

Wholesale Supply and Packing

When comparing 71140-TFT-H00 with the removed component, state any outer-carton marking requirements, send photographs of the removed component, and state the target vehicle application. When checking the headlamp opening, confirm the requested delivery schedule, ask for carton dimensions before freight booking, and check sample approval before mass shipment.

For the listed 2019 application, confirm replacement-part documentation needs, confirm the packing method, and request a packing-list breakdown by item code. Before the carton is sealed, check the ordered mounting side, state any outer-carton marking requirements, and review edge protection inside the carton.

Before the original trim or bracket is discarded, request supported export-carton packing, inspect the carton at receiving, and state the target vehicle application. Before clips or hardware are transferred, compare the supplied product photographs, request the applicable export terms, and confirm the requested delivery schedule.

Frequently Asked Questions

Why must left and right versions of 71140-TFT-H00 be distinguished?

Headlight-area accessories are usually side-specific. Their curves, holes and locator positions should not be assumed interchangeable. For Vezel, match the body style and equipment grade; inspect the junction with the fender edge; compare the installed height with the opposite side; and agree the acceptable delivery window before fitting or quotation.

How should 71140-TFT-H00 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For Vezel, confirm the decorative finish or painted surface; review narrow tips for transport damage; avoid bending narrow moulded tabs; and include the complete OE reference before fitting or quotation.

Does the finish specification matter for 71140-TFT-H00?

Yes. Different vehicle grades can change colour, coating, visible texture and locating details, so compare the original part carefully. For Vezel, match the accessory to the original bumper revision; compare the profile below the lamp lens; inspect the lamp aim after surrounding parts are refitted; and inspect the carton at receiving before fitting or quotation.

Does 71140-TFT-H00 include a complete headlamp assembly?

No. This page covers the pictured front right headlight mounting bracket. Lamps, bulbs, wiring, modules and separate fasteners are not included unless visibly shown in the product photographs. For Vezel, review facelift and pre-facelift styling; inspect reinforcement features behind the part; check the final perimeter around the lamp; and confirm whether clips are required separately before fitting or quotation.

Are clips and screws supplied with 71140-TFT-H00?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For Vezel, verify the trim package named in the application; review the thickness around each mounting boss; support adjacent body panels evenly; and confirm the packing method before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-TFT-H00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.